Availability
Borgeson power conversion kits steer you in the right direction. With true modern power steering feel and feedback, these kits also offer sporty ratios to equip your classic ride with up-to-date precision. Borgeson power conversions are bolt-on kits available for both factory manual and power steering cars. They include re-manufactured integral power steering gearboxes designed to bolt to your stock mounting locations. So, whether you want to convert your manual steering or update your old factory power steering, Borgeson offers a no-cut, no-weld, no-loss of turning radius solution.
( 126 )
$1,084.45
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 161 )
$780.50
—
$1,080.50
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 702 )
$775.55
—
$985.65
Intended for high-horsepower street fans, the McLeod RST Street Twin clutch kits are economically priced twin disc clutches that use your existing flywheel. Able to handle up to 800 hp, the RST Street Twin clutches remain completely street-drivable. The organic lined clutch discs provide smooth engagement with a soft pedal effort, making these clutch kits ideal for the street performance enthusiast. (For select vehicles where these clutches are not adaptable to your existing flywheel, a new flywheel is included in the kit.) Here are some additional features of the McLeod RST Street Twin clutch kits: * Alignment tool included * Lighter-than-stock pedal feel * Will bolt to factory flywheel * CNC-machined and anodized flywheel adapter ring * Organic disc facing for smooth and even clutch engagement with excellent release qualities * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 83 )
$825.00
The legacy continues … and now it is bigger, better, and faster! Built for enthusiasts and professionals, MPV13 is the fastest most sophisticated OBDII interface device to date, and Pro is the new standard. Take advantage of Pro Feature Set capabilities, like standalone data logging and PROLINK+ compatibility (sold separately) already built in. MPVI3 redefines the limits of speed and control with faster standalone data logging and two times the storage capacity compared to the previous generation. Log more runs (faster) and store more calibrations on your MPVI3, all with the convenience of eliminating your laptop from the equation. HP Tuners VCM Suite MPVI3 Credit Pro packages equip you with the most inclusive scanning, logging, and calibration, making them the only tool you need in your toolbox. The MPVI3 connects your vehicle's control modules to HP Tuners' VCM Suite software. You can run complete diagnostics, monitor vehicle performance, read from various vehicle control modules, and more in VCM Suite. Optimize your performance, fuel economy, or whatever your vehicle goals may be in VCM Editor with a multitude of defined parameters. When you are ready, license and tune any vehicle currently supported by HP Tuners with the fastest read and write speeds available. Connect, read, edit, write, drive; HP Tuners VCM Suite MPVI3 Credit Pro packages are offered with or without tuning credits.
( 53 )
$799.91
Manufacturer Rebate
Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included
( 21 )
$980.85
McLeod RXT Street Twin clutch kits are ideal for the extreme horsepower enthusiast who wants performance and economy. Capable of handling up to 1,000 hp, the RXT Street Twin clutches are for those who've kicked it up another notch—but still require streetability. The ceramic facing on the clutch discs provides slightly aggressive engagement with a soft pedal effort, making these clutches suitable for most street performance enthusiasts. Match your vehicle specs to the correct model from McLeod. Additional features include: * Alignment tool * Lighter-than-stock pedal feel * Available with dedicated flywheel or adapter ring for factory flywheel * CNC-machined and anodized flywheel adapter ring * Smooth engagement with excellent release qualities * Ceramic facings on disc increase holding power over similar organic linings * Low rotating mass for quick revs * Blanchard ground floater with multiple straps to reduce noise for streetability
( 46 )
$995.00
These Quick Fuel SS-Series carburetors are designed to offer the power of a race carburetor in a streetable package that weighs 5 lbs. less than other carburetors. Manufactured completely from aluminum, they allow you to change the idle feed and offer power valve channel restrictions and idle and high-speed air bleeds for the ultimate in tunability. The solid-state, electric-choke Quick Fuel SS-Series carburetors have billet throttle bodies, billet metering blocks, 4-corner idle systems, secondary jet extensions, and notched secondary floats. The vacuum secondary carburetors feature fuel bowls with a single-sight glass window, while the mechanical secondary carburetors have dual-inlet, dual-sight glass 4500-style fuel bowls and include additional links to tune the secondary opening rate. Quick Fuel has done it--they've created all-aluminum Super Street carburetors that are perfect for your high performance street machine.
( 47 )
$949.95
—
$999.95
Eaton Detroit Truetrac differentials use a patented design of parallel-axis planetary helix gears to provide a quiet, automatic splitting of torque. They perform like a limited-slip differential under normal driving conditions, automatically transferring torque to the wheel with better traction when ground conditions warrant. These replacement units are available for dozens of axle applications.
( 493 )
$814.99
—
$859.99
Legendary performance offering more value—Quick Fuel Street-Q carburetors deliver the power without the price. How? By retaining what's most important: the function. Street-Qs feature lightweight cast aluminum metering blocks and cast throttle bodies instead of billet components, so they cost less. But, the Q-Series performance remains: 2-circuit metering, down-leg boosters, changeable idle, high-speed air bleeds, and 4-corner idle. Plus, their universal throttle lever design accommodates Ford A/T kickdowns, 700-R4 bracket mounting holes, and the ability to mount brackets for Chrysler vehicles. Quick Fuel Street-Q carburetors fuel your passion and your budget with race-bred performance at no-frills pricing. Order the model designed for fitment on your vehicle application.
( 26 )
$773.95
—
$899.95
Quick Fuel HR-Series carburetors are packed full of the features that you'd expect from a high performance carb. They're available in your choice of vacuum or mechanical secondary versions, and you can select the cfm that's right for your specific engine combination. The Quick Fuel HR-Series carburetors feature screw-in air bleeds, QuickSet sight windows in the fuel bowls, 4-corner idle circuits, screw-in idle restrictions, and a bright, shiny finish for durability.
( 47 )
$799.95
LEED rear disc brake conversion kits add the safety, reliability, and performance of disc brakes to your vehicle. These kits are a direct bolt-on with no cutting, drilling, or welding required. All components are new, high-quality, and precision-machined. The heavy-duty parking brake caliper will allow you to use your stock parking brake cables to actuate the parking brake.
( 19 )
$769.99
—
$1,087.99
Adjust camber and caster for maximum handling and performance with these control arms by SPC Performance. These control arms allow for changes when fine-tuning suspension alignment angles. They're available for a wide variety of applications, such as street rods, sport compact, muscle cars, performance vehicles, and race cars. Fine tune your suspension with SPC Performance control arms.
( 177 )
$1,095.95
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 603 )
$1,038.00
Schumacher Creative Services Big Block Tri-Y under chassis headers give you high-flow header performance and a custom fit that means you don't have to sacrifice your power steering. They fit great with most aftermarket aluminum heads with angled plugs, retain exhaust studs in the heads, and they don't capture the starter. Specifically designed for your application, Schumacher Big Block Tri-Y under chassis headers install quickly and painlessly, works with manual or power steering and automatic transmissions, and are available in different finishes. Select the ones you prefer.
Not Yet Reviewed
$939.00
Classic Performance 1963-74 Mopar disc brake kits will give your muscle Mopar better stopping power you need. These kits include everything you need to give your classic Mopar the stopping power of a modern car, making every cruise or pass down the strip more fun. Classic Performance assembled top quality parts into each kit, making installation as simple as possible. Bring your braking into modern times with Classic Performance 1963-74 Mopar disc brake kits.
( 30 )
$1,048.99
Proform Slim-Fit radiator systems are groundbreaking units designed up to 40 percent thinner than standard coolant equipment. They seamlessly blend the radiator, fan, thermostat, and shroud to create a unified system that's under 4 in. thick, looks and performs great—and is pre-assembled, ready for an exact fit into your vehicle. With revolutionary engineering, Proform has integrated the motor directly into a uniquely designed core made with state-of-the-art brazing technology. The core itself is a hybrid combination of traditional dual 1 in. tubes and full core-width extruded tubes. Combine this with a high performance fan blade inserted into a smooth aluminum shroud, and the result is the industry's thinnest, most streamlined look. Every Slim-Fit radiator includes a shroud, electric fan with adjustable thermostat, wiring harness, and radiator cap. Order the model recommended to fit your application.
( 24 )
$799.99
On Sale
With Hooker Super Competition headers, the objective has always been to make the maximum horsepower possible and put it at the optimum point in the power curve. Hooker Super Competition headers feature tuned primary tubes to create optimum pressure between the intake and exhaust systems. Hooker Super Competition headers include premium exhaust gaskets and new mounting bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 220 )
$1,099.95
$899.95
—
$999.95
Motive Gear is the leading manufacturer of driveline products for just about any vehicle, whether it is a stock daily driver or a full-competition 4x4 or race car. They are proud to offer an unmatched selection of quality components engineered and manufactured for the vehicle and for the way it is driven. Motive Gear ring and pinion sets are engineered to meet or exceed OEM specifications at a price that won't break your budget. Their broad selection of ring and pinion ratios is available for just about every vehicle made from the 1940s through the present. All Motive Gear products meet strict quality standards through advanced manufacturing techniques and are backed by their strong warranty. Their in-house quality control lab utilizes state-of-the-art equipment to continuously check Motive Gear products for strength, tolerance, and hardness. Only after meeting stringent quality standards are Motive Gear products packaged and ready for delivery.
( 283 )
$761.99
Wilwood Forged Dynalite Pro Series rear brake kits provide a complete solution for popular muscle car rear axles on applications where individual wheel parking brake assemblies are not required. FDL Pro Series rear kits package Wilwood's Forged billet Dynalite 4-piston calipers, 2-piece hat and rotor assemblies, and high-friction pads for optimized and balanced braking for all types of off-road, competition, and other customized applications. The Dynalite calipers can be optioned with a full range of finishes to reflect your personalized style, and the rotor choices provide options for high-tech show winning style, or heavy weight durability and cooling capacity for high-heat competition.
( 18 )
$946.13
—
$1,083.63
No gaskets, please! Sanderson headers provide the only leak-free flange design that works! Their patented headers stem from over 50 years of performance. And, like your special project that you've upgraded to be better than the original, Sanderson headers are well-crafted and unique to many types of engines for many types of cars—offering you the best fit for your swapped, modified, and accessorized hot rod. They're crafted from 16-gauge steel with precision, laser-cut, 3/8 in. thick flanges. A weld bead is built up and uniformly ground around exhaust ports and bolt holes to such a precise thickness, all that's needed is a bead of Permatex Ultra Black gasket maker silicone. You'll have no more worries of warped flanges and blown gaskets! Choose the style, finish, and fitment tailored for your vehicle. Sanderson handmade performance headers—for your one-of-a-kind build!
( 283 )
$760.36
The Right Stuff disc brake kit components will help you get your vehicle back on the road in no time. They feature quality built components and are designed for specific disc brake packages.
( 18 )
$948.75
Holley Sniper EFI HyperSpark distributor kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new Sniper EFI system, the combination creates the easiest way to install EFI conversion on the market—and only four flying lead connections are required! The harness only requires one connection to a switched power source, battery positive, battery negative, and fuel pump power. The pre-terminated connectors and a built in 40A relay provides power to all of the components within the system. With the included Sniper EFI main harness you no longer need to run multiple wires to provide switched power for each individual component, which not only helps prevent wiring confusion, but it will also speed up your install time and clean up your engine bay. Simply route the harness and pre-terminated connectors to your HyperSpark coil, distributor, and ignition box and plug them in. Available for all popular engine combinations, these kits come with a distributor, coil, ignition box, and an integrated Sniper EFI harness. Order the application you need. Key features: * Plug-and-Play Sniper EFI main harness replaces the standard Sniper EFI harness with four loose leads, battery positive, battery ground, switched 12 V, and fuel pump power, for a simple and streamline installation * Designed for existing or new Sniper EFI installations (the HyperSpark Master Kit harness retains the same flying lead wire colors as the Sniper EFI main harness; new installations will not use the Sniper EFI standard harness or coil driver * Complete ignition system in a box, including: HyperSpark ignition box, HyperSpark ignition coil, HyperSpark distributor (for your application), and a plug-and-play main harness * HyperSpark distributors feature a Hall Effect crank trigger sensor providing a noise-free rpm signal to the Sniper ECU * Patented clear installation cap eliminates any confusion while installing the distributor * HyperSpark CD ignition box is seal and powder coated to be installed in the harshest of locations * External LED on HyperSpark CD Ignition box helps verify 12 V, cranking rpm, and low battery voltage * 135mJ of spark energy when used with the HyperSpark ignition coil, ensures complete combustion * Integrated ignition coil bracket simplifies mounting the Ignition coil * Ignition coil connector removes any doubt of loose connections at the Ignition coil * Enables timing control on a Sniper EFI Installation
( 21 )
$999.95
Wilwood's Forged Dynalite Pro series front disc brake kits are designed to provide unmatched performance with classic, high-tech styling for a wide variety of street rods, musclecars, hot rods, and heavy drag cars. The kits combine the powerful clamping force of Dynalite calipers with the added performance and cooling capacity of competition-style vented rotors. Other features include hubs, brake pads, caliper brackets, mounting hardware, and detailed instructions for an easy bolt-on installation. In addition to everything else, these kits can also cut as much as 35 lbs. off of your front-end.
( 199 )
$1,057.29
—
$1,087.61
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
