Availability
Showing In Stock Items. Show All 106 Items.
Make sure that the job is done right with Timken differential carrier bearings. You can trust Timken to supply you with bearings manufactured with technology-driven processes to the most stringent of thresholds and manufacturing tolerances. Look to Timken's differential bearings to provide you with the confidence that you need when completing your ring and pinion installations.
( 47 )
$18.99
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 43 )
$108.99
—
$148.99
TransGo automatic transmission rebuild components are engineered for performance and designed for durability. These kits address nearly every gearbox problem possible through quality that only a legend in the transmission repair industry can provide. Shift that clunky machine into reliability mode with TransGo automatic transmission rebuild components. Order the kit designed to fit your specific model.
( 11 )
$231.43
TransGo valve body repair kits give you the components needed to restore proper shifts and correct other problems with your automatic transmission. They will help correct cold rough shifts, downshift problems, long shifts, hard or soft shifts and lockup problems. Repair your automatic transmission with TransGo valve body repair kits.
( 8 )
$41.54
FAG USA wheel bearings are compact bearing units, manufactured with a defined, preset bearing clearance. The results are rugged design, as well as for-life (no maintenance) lubrication and sealing. They feature angular contact ball bearings for both front and rear wheels, ensuring optimum performance in the most demanding situations. Fischer Aktien-Gesellschaft (FAG) has been around for over 100 years and part of the automotive industry for more than 50 of them. Put your trust in proven manufacturing and components with FAG USA wheel bearings—available for hundreds of applications.
( 4 )
$15.99
Mopar Replacement automatic transmission filters are genuine OE replacements offering the right fit, function, and peace of mind. Filters play a vital role in maintaining the optimum performance of your transmission by collecting contaminants—dirt, debris, bits of metal—from the oil that lubricates it. Be sure your Chrysler, Dodge, Jeep, or Mitsubishi tranny is using clean oil; choose Mopar Replacement filters when servicing your transmission.
( 9 )
$36.99
—
$40.99
Summit Bucks
Moog wheel bearing and hub assemblies feature problem-solving innovations and include application-specific design enhancements. They are engineered to overcome problems and deliver smooth, reliable performance. Features and benefits of Moog wheel bearing and hub assemblies include: * Roll-form design ensures consistent and optimal preload * Precision-matched components; rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration * Moog abrasion-resistant ABS cord manufactured from a blended material that offers increased abrasion resistance and better protection from adverse conditions * For applications that require it, ABS molded shield and socket connections for even greater defense against contamination * Premium quad-lip seal design ensures maximum protection from contamination * Wheel studs have a protective coating that helps prevent rust and corrosion, enabling easier removal and proper torqueing of wheel nuts
( 696 )
$71.99
Automatic transmission flexplate mounting bolts secure the flexplate to the crankshaft and are typically replaced when a new flexplate is being installed. Dorman flexplate mounting bolts are designed to match the fit and function of the original equipment bolts on specified vehicles. They offer durable construction for reliable performance and a direct fit that ensures your flexplate is securely mounted to the crankshaft.
Not Yet Reviewed
$18.99
Are you trying to locate just the right bolt to complete your clutch repair? Dorman's torque converter bolts ensure the correct bolt length, thread pitch, and strength. These high-quality, steel-constructed bolts are coated with black oxide for corrosion resistance, and the threads are coated with a special thread-locking compound to maintain proper bolt torque. These direct replacements provide a proper fit every time--no special tools are required for installation.
( 10 )
$9.99
These Standard Motor automatic transmission control solenoids are designed to replace faulty factory units to keep your transmission shifting smoothly. They meet or exceed OEM specifications and are available for a variety of applications.
( 14 )
$287.99
Do you need to replace your shifter bushings? Dorman has you covered with these OEM replacements. They offer a selection of durable plastic, rubber, and polyurethane bushings to service your automatic and manual shifter linkage needs. Choose the parts designed for fitment with your vehicle application.
( 26 )
$14.99
Mopar Replacement torque converters are genuine OE replacement parts that deliver the proper fit and function, making your install easier and providing the performance you've come to expect. When it's time to servicing your Chrysler, Dodge, or Jeep, don't risk another minute by searching and buying something that may or may not work. Select the correct parts--genuine OE Mopar parts!
Not Yet Reviewed
$521.99
Crown Automotive automatic transmission accumulator pistons will help restore smooth shifting. These strong pistons are made from aluminum--not plastic--to serve you longer. Your accumulator needs a good piston to control pressure and avoid harsh shifts. Crown Automotive automatic transmission accumulator pistons offer the fit and function needed for proper performance.
Not Yet Reviewed
$11.99
Dorman automatic transmission torque converter clutch (TCC) solenoids are engineered and extensively tested to match the exact fit, function, and performance of the stock solenoid on specific vehicle years, makes and models. These Dorman components are a direct replacement for an original part that has failed due to wear or fatigue. They're durably constructed from high-quality materials to ensure reliable performance and a long service life.
Not Yet Reviewed
$44.99
Your Constant Velocity (CV) joint is immersed in grease and protected by a CV boot. Regular wear and tear or impact with road debris could cause cracks, punctures, or other damage that perforates the boot. Once the boot is punctured, water and contaminant ingress will begin to displace vital lubricating grease from the CV joint. Mevotech Duraflex CV joint boots are constructed with premium neoprene to restore protection, keep lube in, and contaminants out. The boot kits include adjustable clamps, snap ring, and grease tube for an easy installation.
( 5 )
$10.99
ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.
( 87 )
$522.99
—
$866.99
Dorman transmission fluid dipsticks are better than your originals. Constructed from tough plastic, the brightly colored handle won't break or separate from the rod. Plus, it makes it easier to locate under the hood and the clear marks on the rod promise easier reading of oil levels. These dipsticks feature O-rings that seal the top prohibiting contaminants from escaping into the engine oil bay.
( 6 )
$26.99
FAG USA wheel bearing and hub assemblies are compact, lightweight, maintenance-free hubs. They combine the cost-effectiveness and proven performance characteristics of other bearings with the convenience of an integral mounting flange for mounting brake, disc, and wheel. Fischer Aktien-Gesellschaft (FAG) has been around for over 100 years and part of the automotive industry for more than 50 of them. Put your trust in proven manufacturing and components with FAG USA wheel bearing and hub assemblies, available for hundreds of applications.
( 11 )
$98.99
—
$141.99
Dorman pre-pressed wheel hub assemblies are time-saving and cost-efficient solutions for complete hub assembly repairs. Dorman OE FIX offers one pre-assembled unit, consolidating all four components and ready for installation right out of the box—significantly cutting labor time. The dealer repair option is to purchase components separately, requiring a specialized shop press and/or labor-intensive assembly prior to installation. Dorman OE FIX is the better option. Order the model designed for your vehicle application. Dorman pre-pressed wheel hub assemblies feature: * No special shop press tool required during installation, saving one to two hours of labor * Component pieces are factory manufactured and assembled under rigorous quality control measures, delivering higher consistency to meet or exceed the application needs * Cost-savings advantage to purchasing components separately * Constructed from quality materials for high performance and durability
( 37 )
$70.99
—
$100.99
SKF Bearings tapered roller bearings are typically used for non-driven front or rear wheels and are generally used in pairs. SKF offers a wide range of tapered cone roller bearings in both metric and inch sizes. They're manufactured from premium materials to deliver the best in quality and friction management. Order the replacement bearings designed for your vehicle application. SKF tapered roller bearings feature: * One inner ring and one outer ring, matched precisely with the rollers * Low cross sections and precise contact angles to accommodate axial and radial loads when mounted with proper clearance * Precision-matched cup and cone designed to install easily and maximize bearing performance and life
Not Yet Reviewed
$15.99
These National Bearing wheel bearings are designed for use with your OEM or aftermarket brake rotors. Their steel roller bearing configuration allows for maximum performance without sacrificing durability.
( 23 )
$11.99
Cardone products are the highest-quality new manufactured parts in the aftermarket. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their manufacturing processes can only be found behind the Cardone name. For the past 40 years, Cardone's innovative manufacturing processes have provided a high-quality, lower-cost alternative to replacement parts. Add to that a new part number release program offering the latest-model coverage, and you get a winning combination! It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot—Cardone is your one source for replacement hard parts. Additional features of Cardone new CV drive axles: * The most advanced engineering and manufacturing processes to provide you with high-technology replacement parts * Neoprene boots resist ozone, eliminating cracking, a leading cause of CV boot failure * 3 percent moly grease provides excellent high-temperature and pressure characteristics, extending the life of the joint * All axles are supplied with a new axle nut, replacing the worn or damaged existing axle nut * Rolled axle splines guarantee the proper installation of the axle into the hub and transmission * Rolled threads guarantee the proper installation of the axle nut Order the replacement model designed for your vehicle application.
( 215 )
$82.99
—
$100.99
GSP new CV axle assemblies are engineered to provide OE fit, form, and function. Premium materials, coupled with precise machining and balancing, ensure smooth, vibration-free performance in all driving conditions. All axles are thoroughly inspected for quality and workmanship. Additional attributes of GSP new CV axle assemblies include: * Since boot failure is the main cause of CV axle failure, GSP axles use only premium-grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity * Assembled with a specially formulated, high-temperature moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
( 82 )
$83.99
—
$107.99
SPEC Stage 2 clutch kits are designed for street, drag race, pulling, and autocross use. They feature segmented or full-faced Kevlar® discs with steel backings. These linings deliver excellent drivability like SPEC Stage 1 clutches, but with slightly longer life and higher torque capacity. The hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Nearly a thousand models are available; order the kits recommended for your vehicle. Additional features of SPEC Stage 1 clutch kits: * High-clamp pressure plate * Pure Kevlar® friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included (where applicable)
( 17 )
$584.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
