Availability
If you're building an all-out competition car, then you need a lightweight flywheel that will allow the engine to rev quicker and not eat up a lot of power. RAM billet aluminum flywheels greatly reduce rotating weight to permit quicker revving and higher power output, but still retain enough mass to resist heat distortion that could adversely affect clutch performance. RAM billet aluminum flywheels are made in America and produced in house. All RAM flywheels are computer-balanced within a 1/2 oz., surface ground (which results an optimum mating surface), and are ready to run out of the box. SFI-approved, these flywheels are CNC-machined from certified materials and have rugged steel friction-surface inserts. RAM's billet aluminum flywheels feature a 1/4 in. thick friction insert to dissipate heat away without distortion. Technical note: As it spins, a heavy flywheel stores more energy than a lighter one. Engine and gearing combinations that require more power or inertia to make the car launch without bogging the motor need heavier flywheels. However, heavier flywheels accelerate slower. Lighter flywheels create less inertia at launch, but accelerate quicker through the gears. To effectively use a lighter flywheel, you must consider the car's weight, operating rpm of the engine, and, most importantly, the gearing. Too little gear will cause the engine to 'bog' on launch.
( 31 )
$469.00
Cast flywheels are not explosion-proof and can be dangerous when used in high performance applications at higher rpm. RAM billet steel flywheels are recommended as replacements for factory-cast flywheels in high performance and racing vehicles. Made in America and produced in-house, all RAM flywheels are computer balanced within a 1/2 oz., surface ground (which results an optimum mating surface), and are ready to run out of the box. They're better for launching heavier drag race cars and provide better drivability in street vehicles. SFI-approved, RAM billet steel flywheels are CNC-machined from certified materials. Order the model recommended for your year/make and engine application. Technical note: As they spin, heavy flywheels store more energy than lighter ones. Engine and gearing combinations that require more power or inertia to make the car launch without bogging the motor need heavier flywheels. However, heavier flywheels accelerate slower. Lighter flywheels create less inertia at launch, but accelerate quicker through the gears. When choosing a flywheel, you must consider the car's weight, operating rpm of the engine, and, most importantly, the gearing. Insufficient gearing will cause an engine with too light of a flywheel to "bog" on launch.
( 130 )
$329.00
LuK Clutch flywheels are factory replacements for your stock components. They are perfectly balanced and precision-machined to improve clutch performance and reduce vibration. Designed by LuK's development team, they match the products to the special requirements of your vehicle, exceeding OE standards and specifications. Choose the disc diameter and ring gear tooth quantity needed for your application.
( 132 )
$93.99
American Powertrain's Science Friction flywheels are available for most GM, Ford, Mopar, and AMC V8 engines. Their high-performance billet steel or lightened billet steel flywheels work best on the street for smooth performance—and for drag racing where the flywheel stores energy for hard launches. Billet aluminum flywheels are preferred for high-revving engines and in road racing where rapid rpm gain is essential. More than 50 models and configurations are available; order the flywheel recommended for your engine application. Features include: * High-grade billet steel or aluminum * Heavy-duty ring gears (with welded tabs on aluminum flywheels) * SFI certification is available on every flywheel * 20 percent lightening is available on steel flywheels * Double Blanchard-ground steel friction plates on aluminum flywheels * Aluminum flywheels have aircraft-grade riveted friction plates
( 12 )
$315.95
—
$565.95
Fidanza billet aluminum flywheels feature excellent heat dissipation and weight reduction. The replaceable friction surface is machined from 1045 steel and attached with military-grade aerospace fasteners. These flywheels are manufactured from the highest quality 6061-T6 billet aluminum and feature a 1050 heat-treated steel ring gear that's pressed on and secured with Grade 8 button screws. They also use a stepped dowel system so that when the parts are installed they're locked into place. No chromoly can compete with the awesome serviceability, strength, and superior design of Fidanza billet aluminum flywheels—available in nearly 200 models and options for applications from the 1940s and up.
( 32 )
$629.99
On Sale
Hays billet aluminum flywheels are popular with many road racers and serious drag racers--shouldn't you have one? They are manufactured from certified billet material to handle the stress of high rpm and the severe punishment of racing. Upgrade to a precision-machined and engineered Hays billet aluminum flywheel. Features include: * SFI-approved--legal for use in racing classes that require SFI certification * Forged from 7075 T-6 or 6061 T-6 alloy for weight reduction and excellent heat dissipation * Forged, heat-treated steel ring gears and replaceable 1045 steel friction surfaces attached with high-grade fasteners * CAD-designed for optimum performance and reliability * Offered in internal, external, or neutral (zero) balanced versions * Available for a wide variety of engines Note: When choosing a flywheel, remember that a heavier flywheel stores more energy. A heavy car requires more power (or inertia) to launch without bogging the engine and needs a heavier flywheel. Lighter flywheels create less inertia at launch but will accelerate faster through the gears.
Not Yet Reviewed
$725.95
$652.95
On Sale
Hays steel flywheels are engineered to handle extreme-duty applications and designed to take the punishment of today's high-horsepower engines. They are CAD-engineered and precision CNC-machined to strict tolerances. Available in weights up to 50 lbs. for specialized applications, most Hays flywheels are drilled with both the Borg and Beck and Long-style clutch patterns. Upgrade to a precision-machined and engineered Hays billet steel flywheel. Features include: * SFI-approved--legal for use in racing classes that require SFI certification * CNC-machined from certified billet steel for maximum strength and durability * CAD-designed for optimum performance and reliability * Offered in internal, external, or neutral (zero) balanced versions * Available for a wide variety of engines Note: When choosing a flywheel, remember that a heavier flywheel stores more energy. A heavy car requires more power (or inertia) to launch without bogging the engine and needs a heavier flywheel. Lighter flywheels create less inertia at launch, but will accelerate faster through the gears.
( 30 )
$550.95
$494.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
