Availability
Showing In Stock Items. Show All 398 Items.
On Sale
MSD Blaster coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets.
( 443 )
$54.45
$49.05
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1969 )
$140.95
—
$190.95
$126.85
—
$171.85
On Sale
Street Demon carburetors redefine street carburetors with clean looks and ease of use. They offer enthusiasts a straightforward design to deliver stable idle, amazingly crisp throttle response, and smooth performance. With optimized calibration and a dual mounting pattern, they are ready to run right out of the box. The carburetors feature an integrated fuel bowl/main body design with the gasket above fuel level and have no plugged passages, eliminating all potential leak paths. Additional features include: * Available with either a ball burnished aluminum, polished aluminum, or black aerospace composite fuel bowl * One-piece air horn assembly with a single fuel inlet * Torsion spring valve control/adjustment permits seamless primary to secondary throttle response, regardless of the throttle opening rate * Dual mounting bolt pattern (square bore or spread bore) fits any street 4-barrel intake manifold. Adapter may be required. * Integrated 700R4/200R4 transmission kickdown cable mounting location * Ford automatic transmission kickdown * Inverted flare and 3/8 in. barb fuel inlet fittings
( 388 )
$499.95
—
$549.95
$448.95
—
$493.95
On Sale
B&M automatic StarShifters normally work like standard detent shifters, but by simply pulling the lockout trigger and moving the stick to low, they become full ratchet action shifters for quick gear changes. With a cable-operated mechanism, a universal floor-mount console, NHRA/IHRA-approved reverse lockout, a neutral safety switch, and a polished aluminum T-handle, the StarShifters are at home on the street or the track.
( 154 )
$340.95
$306.85
On Sale
Quick Fuel Slayer Series carburetors offer affordability, great looks, and impressive adjustability. Economical horsepower performance is not a dream! Quick Fuel Technology has engineered their Slayer Series of 600 cfm and 750 cfm street carburetors with everything you want at a price you need to fit your budget. Their hand-built quality and all-aluminum construction are outstanding—but consider these additional features: changeable idle air and high-speed air bleeds, 3-stage emulsion circuits, changeable primary idle feed and power valve restrictions, vacuum secondary adjustment screw, and unique secondary metering plate with changeable jets. Pursue horsepower and get more dollar power with the carburetors that let you tune "your way" and offer show-quality appeal—Quick Fuel Slayer Series carburetors.
( 222 )
$499.95
—
$549.95
$448.95
—
$493.95
On Sale
Do you want to move a column shifter to the floor of your project car and still retain that performance flavor? B&M Unimatic shifters are just the ticket! They look identical to a manual 4-speed shifter and, because of their cable-operated design, they can be easily installed. Like the B&M top line shifters, they include a neutral safety switch and a 5 ft. cable and a black plastic T-handle.
( 73 )
$299.95
$269.95
On Sale
Looking for the most aggressive sound in the Flowmaster muffler line? Then take a look at their 40 Series mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case. This improves both horsepower and fuel economy. Best of all, they allow you to hear that cool Flowmaster tone inside of the vehicle, as well as outside. So, if you want more power and less noise, then you've got to get Flowmaster 40 Series mufflers.
( 356 )
$99.95
$89.95
On Sale
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 433 )
$73.69
—
$79.09
$66.35
—
$71.15
On Sale
B&M truck shifters feature the classic Megashifter design, in a configuration that will fit your light truck! All of the things that you expect in a B&M shifter are right here and ready to install. The Truck Megashifters include a taller base and an adjustable floor mount bracket for proper installation.
( 57 )
$527.95
$474.95
On Sale
Flowmaster FlowFX mufflers feature mandrel-bent bright stainless steel tubing, mated to specially designed straight-through for great sound and maximum performance. FlowFX 409 stainless steel mufflers deliver a moderate to aggressive interior and exterior sound level that will appeal to anyone looking for a deep, powerful exhaust note.
( 391 )
$69.95
$62.95
On Sale
B&M Pro Ratchet automatic shifters have the style and quality for professional racing, along with easy ratchet action. The Pro Ratchets have an NHRA/IHRA-approved reverse lockout that can be operated with one hand, a neutral safety switch, and a backup light switch. They work with both forward and reverse pattern valve bodies and most 3 and 4-speed transmissions. Additional installation kit required for some transmission models. Compatible with CO2 and electric shifters, these shifters include a brushed aluminum cover and a 5 ft. super-duty race cable.
( 85 )
$449.95
$403.95
On Sale
B&M QuickSilver automatic shifters have cable-operated ratchet action for dependability, and a chrome plated stick and cover for good looks. These QuickSilver shifters include an NHRA/IHRA-approved reverse lockout, a lighted gear indicator, and they will work with reverse pattern valve bodies.
( 170 )
$483.95
$434.95
On Sale
These B&M automatic Sport shifters offer good looks and performance. Features include: * Black T-handle * Chrome steel stick and plate * Rubber boot * Black plastic console; can be trimmed to custom-fit any floor * Neutral safety switch * Backup light switch * Lighted gear indicator
( 48 )
$362.95
$326.65
On Sale
SCT BDX performance programmers include features that'll keep you in the fast lane! These computer programmers are bred to sharpen and maximize your rig's potential to tackle tough terrain, pull heavy payload, and gain the most fuel economy on the highway. SCT gas and diesel programmers are equipped with on-screen gauges, the capability of holding 10 custom tunes, and data logging/monitoring of critical engine parameters. BDX units allow you to adjust nearly two dozen functions (options vary for each vehicle). All of this is packed into compact, sleek, hand-held designs with full-color, easy-to-use LCD displays. Unleash more horsepower and torque when you need it the most—on and off-road. You'll stay ahead of the pack with SCT BDX performance programmers. Order the model recommended for your vehicle application.
( 18 )
$399.00
$359.10
On Sale
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 704 )
$727.30
—
$1,361.75
$654.57
—
$1,225.58
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 328 )
$620.95
$557.95
On Sale
Get big-time performance with Quick Fuel Q-Series 4-barrel carburetors with high-flow main bodies, which include either down-leg or annular boosters, screw-in idle and high-speed air bleeds, accelerator pump discharge nozzles, and a blended venturi area. These carburetors have CNC-machined billet metering blocks with 4-stage emulsion to provide more precise fuel metering, improve throttle response, and give a more uniform fuel performance curve. With so many great benefits and their blend of performance and drivability, it's no wonder that these Quick Fuel Q-Series carburetors are the popular choice. So, go ahead--throttle it up with Quick Fuel!
( 46 )
$1,099.95
—
$1,399.95
$988.95
—
$1,258.95
On Sale
Maradyne Jetstreme electric fans feature a low-profile design to allow for turbo or supercharger installations. They use a sealed motor tested in accordance with DIN EN 60529 and are dust and waterproof to IP68. The fans utilize an S-blade design for quieter operation and have a rubber seal that eliminates vibration contact and increases airflow. Maradyne Jetstreme electric fans have all glass-filled nylon construction for maximum durability.
( 18 )
$218.58
—
$463.04
$196.72
—
$416.74
On Sale
Quick Fuel HR-Series carburetors are packed full of the features that you'd expect from a high performance carb. They're available in your choice of vacuum or mechanical secondary versions, and you can select the cfm that's right for your specific engine combination. The Quick Fuel HR-Series carburetors feature screw-in air bleeds, QuickSet sight windows in the fuel bowls, 4-corner idle circuits, screw-in idle restrictions, and a bright, shiny finish for durability.
( 47 )
$699.95
—
$799.95
$628.95
—
$718.95
On Sale
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$389.95
—
$449.95
$350.95
—
$403.95
On Sale
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 83 )
$549.95
—
$999.95
$493.95
—
$898.95
On Sale
The Hurst Pro-Matic 2 shifters incorporate an extended shifter stick for ease of operation and are designed to fit most pick-up trucks. Once the shifter is installed, the textured console and brilliant top cover that can be trimmed to fit any floor contour integrate the shifter with the interior. While easy on the eyes, this shifter is not all about looks. On the street, you will enjoy the ride as you freely tap the stick from gear to gear. If you decide to transfer your beauty of a machine to the track, this ratchet style shifter is built to handle the most powerful shifts, and the special positive reverse Loc/Out meets NHRA and IHRA technical requirements. These Hurst shifters come complete with all the hardware required to make installation easy, including a 5 ft. long heavy-duty shifter cable and instructions. Neutral safety and backup light switch assembly included. Key features: * Retro manual shifter look * Compatible with Forward or Reverse pattern valve bodies * Fits most popular 3-speed automatic transmissions * Comes complete with brackets, lever, and 5 ft. shift cable * Includes neutral safety and backup light switches * Illuminated gear position indicator * Positive reverse Loc-Out feature
( 25 )
$499.95
$448.95
On Sale
Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential
( 6 )
$3,049.95
$2,743.95
On Sale
Legendary performance offering more value—Quick Fuel Street-Q carburetors deliver the power without the price. How? By retaining what's most important: the function. Street-Qs feature lightweight cast aluminum metering blocks and cast throttle bodies instead of billet components, so they cost less. But, the Q-Series performance remains: 2-circuit metering, down-leg boosters, changeable idle, high-speed air bleeds, and 4-corner idle. Plus, their universal throttle lever design accommodates Ford A/T kickdowns, 700-R4 bracket mounting holes, and the ability to mount brackets for Chrysler vehicles. Quick Fuel Street-Q carburetors fuel your passion and your budget with race-bred performance at no-frills pricing. Order the model designed for fitment on your vehicle application.
( 26 )
$773.95
—
$899.95
$695.95
—
$808.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
