Availability
Showing In Stock Items. Show All 24 Items.
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1973 )
$140.95
—
$172.95
$126.85
—
$155.65
On Sale
Flowmaster 50 Series Delta Flow mufflers are designed to produce a mellow, deep sound. They're milder on the outside of the vehicle than the 40 Series mufflers and are significantly quieter on the inside. These mufflers combine the increased horsepower and torque you've come to expect from Delta Flow technology with the performance sound and feel that makes Flowmaster famous.
( 367 )
$169.95
—
$184.95
$152.95
—
$166.45
On Sale
These CrossWind intake manifolds from Professional Products feature identical plenum and runner designs to the Typhoon. The main difference is that there is an open area under the plenum chamber. This feature is sometimes called an air gap design. The air flowing under the plenum provides a cooler charge for the incoming air with less heat transfer from the engine. This cooler air charge provides additional power.
( 43 )
$160.99
—
$234.99
$144.89
—
$211.49
On Sale
Looking for the most aggressive sound in the Flowmaster muffler line? Then take a look at Flowmaster stainless steel 40 Series mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case. This improves both horsepower and fuel economy. Best of all, these mufflers allow you to hear that cool Flowmaster tone inside of the vehicle, as well as outside of it. So, if you want more power and less noise, then you need to acquire these Flowmaster stainless steel 40 Series mufflers.
( 59 )
$132.95
$119.65
On Sale
Flowmaster Stainless Steel Super 44 mufflers offer distinct advantages over original 40 Series mufflers, while using the same technology. The Stainless Steel Super 44 mufflers deliver a deep, rich tone with an improved flow path radius, optimum internal flow, and sound control engineering, all created with Flowmaster's Delta Flow technology. They are the most aggressive, deepest sounding, highest performing 4 in. case street mufflers that Flowmaster has ever built, exceeding OEM specifications for use on street cars, race cars, and sport trucks. They are ideal when dynamic sound, torque, and horsepower improvements are demanded in a smaller high performance muffler. Their maximum performance and improved flow path will generate more torque and power than ever before! If you really want to hear your exhaust system inside as well as outside of your vehicle, then these Stainless Steel Super 44 Flowmaster mufflers are for you.
( 111 )
$136.95
$123.25
On Sale
These Super 40 Flowmaster mufflers significantly outflow the older two-chamber mufflers. They help create even more horsepower with less interior noise and a deeper exterior sound. These mufflers feature a design patterned after Flowmaster's race mufflers. These Flowmaster mufflers far exceed older models on Dyno tests. They create a beautiful hot rod sound, along with increased horsepower and gas mileage. So, if you want to get that hot rod sound and add some horsepower, then these Flowmaster mufflers have you covered.
( 185 )
$149.95
—
$168.55
$134.95
—
$151.65
On Sale
Flowmaster Super 40 Series Delta Flow mufflers go a step beyond their original 40 Series product. By precisely placing three internal baffles in the case, and welding them to exacting specifications, the 40 Series Delta Flow mufflers not only out-scavenge the originals, but they also provide superior reductions in exterior sound levels and resonance, which are transmitted through the exhaust system and into the vehicle. You get all this, plus improved torque and horsepower—and that famous Flowmaster sound!
( 144 )
$149.95
—
$166.95
$134.95
—
$150.25
On Sale
These 70 Series Big Block II mufflers are designed around a large case for maximum volume and efficiency. They're 2 in. narrower than the original Big Block muffler, making them easier to install into tight areas. Other features include a mild, mellow exhaust tone and a resonant tuning chamber for reduced interior sound levels.
( 124 )
$243.95
—
$249.95
$219.55
—
$224.95
On Sale
Flowmaster stainless steel 50 Series SUV performance mufflers are a larger version of Flowmaster's famous 50 series mufflers, and are designed specifically for trucks, SUVs, and large displacement car engines. They feature a special tuning chamber that reduces interior resonance, while their larger case improves sound control and optimizes exhaust flow. These mufflers are manufactured from fully welded 16 gauge stainless steel for the ultimate in durability.
( 31 )
$219.95
$197.95
On Sale
Flowmaster Super 50 series muffler is a larger version of Flowmaster's famous 50 series mufflers, and designed for trucks and SUV's, it is also well suited to muscle car and high-performance applications. They are constructed of 16-gauge aluminized steel and fully MIG welded for maximum durability and feature a special tuning chamber that reduces interior resonance, while their larger case improves sound control and optimizes exhaust flow.
( 65 )
$199.95
$179.95
On Sale
These Professional Products SFI Spec PowerForce Plus dampers provide more applications for a wider range of engines. All Professional Products PowerForce Plus dampers feature a bonding process, which adheres the elastomer to the i.d. of the inertia ring and the o.d. of the hub. Through subsequent research and development, Professional Products has perfected a new process that utilizes a stronger adhesive, along with an improved elastomer, to create a much stronger bond. Professional Products dampers all feature clear, white, easy-to-read timing marks against a painted black background. In addition, they engrave a mark every 90 degrees, which is also painted white (90 degree marks are not on small block Ford dampers). You won't find any dampers that are more accurately balanced or more closely machined for the correct fit than the Powerforce or Powerforce Plus line of high performance street or SFI Spec racing harmonic dampers.
( 73 )
$158.99
$143.09
On Sale
ACCEL 300+ Ferro-spiral race wire sets are custom tailored for race engines and their builders. The oversize wire will stand up to extreme heat and voltage. Their outer layers also resist heat, along with chemicals and moisture, while the high-density insulation eliminates arcing. Leave the competition behind when you order the ACCEL 300+ Ferro-spiral race wire set designed for your application.
( 1 )
$176.95
$115.95
On Sale
ACCEL Truck Super tune-up kits have it all! Everything that you need to super-tune your pickup, van, or SUV is in there, including a custom-fit wire set, a distributor cap and rotor, and C-Cut performance spark plugs. Most kits include the 8mm Extreme 9000 wire sets, which feature a low-resistance Ferro-Spiral core and heat-reflective coated spark plug boots rated to 1,200 degrees F. Some inline 6-cylinder applications use the 5000 Series wire sets where extreme heat is not a problem. The distributor cap and rotor are precision-molded from impact-resistant, high-dielectric strength compounds and have brass or copper inserts (depending upon your application) and stainless steel contact springs. In addition, the race-proven C-Cut performance spark plugs deliver maximum burn efficiency for improved performance and reduced emissions.
( 178 )
$237.95
—
$249.95
$178.95
—
$224.95
On Sale
Flowmaster 50 Series heavy-duty mufflers can deliver more horsepower and increase torque and fuel mileage. Specifically designed for gas and diesel applications, the 50 Series heavy-duty mufflers can significantly improve acceleration and towing power while also increasing fuel economy.
( 32 )
$271.95
$244.75
On Sale
JET Stage 1 performance chips/modules are designed to add up to 25 hp instantly with simple, plug-in installation. Only the JET Performance modules provide exclusive, full-range Dynamic Spectrum Tuning of the air and fuel ratio, ignition advance, transmission, and various other parameters. Each program is track and dyno-tested to ensure the most possible horsepower and drivability from each application. Choose the one right for your vehicle.
( 98 )
$284.96
$256.46
On Sale
ACCEL Extreme 9000 ceramic wires are the cure for burnt spark plug boots. These wires provide excellent energy delivery while providing the highest level of RFI/EMI suppression. They're ideal for custom engines, boats, and RVs—plus great trackside accessories when you need to make up a replacement wire. ACCEL Extreme 9000 ceramic spark plug wire sets are available straight or in right-angle configurations. Order the set recommended for your vehicle and engine application. More product features include: * Finished with stainless steel spark plug terminals and ceramic spark plug boots * Each wire features ultra-high temperature double silicone wire rated at 600 degrees F * Ferro-Spiral core wire developed for performance use * Capable of withstanding up to 2,000 degrees F
( 463 )
$191.95
—
$225.15
$105.95
—
$123.95
On Sale
Brembo Prime UV Coated brake rotors are developed as direct replacements that meet or exceed OEM specifications. Environmentally friendly, the solvent-free UV coating offers superior protection for the discs, including braking plate surfaces. High-carbon cast iron, where applicable, minimizes noise and vibration and provides maximum performance and enhanced driving comfort. Included is a fixing screw kit with all the necessary hardware for simple and worry free installation. UV technology, a shiny metallic effect, and respect for the environment: just three extraordinary features of Brembo coated rotors. And with an extended range covering a multitude of vehicles, you should have no problem finding the correct fit for your vehicle.
( 10 )
$135.85
—
$158.12
$122.26
—
$142.31
On Sale
JET Stage 2 performance chips/modules have been programmed to deliver peak power increases under hard throttle conditions, such as towing and wide-open throttle. These modules offer a full-range of DST programming of the air/fuel ratio, ignition advance, and transmission, and are fully track and dyno tested to ensure the most possible power without affecting day-to-day drivability. Stage 2 power chips/modules must use the following for proper performance: * 180 degree thermostat * 91 octane or greater fuel * Free-flowing exhaust
( 112 )
$292.46
$263.21
On Sale
Designed to deliver more horsepower and torque, aFe Silver Bullet throttle body spacers make an excellent addition to your vehicle. They're precision-machined from T-6061 billet aluminum to exacting specifications to provide optimal performance. The combination serrated/helix design creates turbulence so that the air/fuel charge is thoroughly mixed for a complete burn. Their specially-designed serrated edge will reduce the whistling sound normally associated with throttle body spacers. The aFe Silver Bullet throttle body spacers increase the volume between the throttle and cylinder, improving volumetric efficiency.
( 90 )
$137.00
$123.30
On Sale
JET underdrive pulley sets reclaim lost horsepower and mileage by reducing the drag placed on the engine to drive the accessories, such as the air conditioning, power steering, and water pump. The pulleys slow down these accessories to allow the engine to turn with less effort without any adverse effect on the operation of A/C, power steering, charging, or cooling systems. Installation consists of simple bolt-on replacement of the stock pulleys. Kits include pulleys, hardware, complete instructions, and part number for new serpentine belt as most kits will require use of smaller size belt. Belt is not included with kit. The number and type of pulleys will vary per application.
( 12 )
$299.96
$269.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
