Availability
Lares new (not remanufactured) power steering pumps are engineered to OE specifications to ensure proper fit, form, and function. They're manufactured from the same high-quality materials as your original components to provide long-lasting performance. Over a hundred models are available, with or without an included reservoir, for vehicle and engine applications from 1960 and up. Order the replacement pump recommended for your ride.
( 138 )
$129.99
—
$170.99
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1973 )
$140.95
—
$172.95
$126.85
—
$155.65
Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.
( 1525 )
$249.99
—
$279.99
Bilstein B8 5100 Series shocks feature a monotube design for cooler, more efficient operation and longer life. They have the largest available piston diameter, providing superior handling and performance. The shocks' patented digressive valving instantly reacts to changing surface conditions for maximum comfort and control—on and off the road. These shocks also have split compression and rebound valving tuned for each specific application. Order the model designed for your year/make/model. Additional features: * 2 in. seamless extruded tube * 14mm centerless-ground, case-hardened, chromed, and super-polished rod * 46mm Bilstein digressive piston * Self-adjusting, deflective-disc independent rebound and compression
( 1403 )
$118.00
Want to improve the performance of your ride, without a major hassle? QA1 Stocker Star shocks could be your answer. They're lightweight, fully adjustable, and bolt right in. They rely on deflective-disc valving and have 18 levels of damping, which you can select at the twist of a knob—with the shocks in place on the vehicle. Stocker Stars have 5/8 in. hard-chromed centerless-ground piston rods, double-lip wiper seals, and one-piece, forged, machined-aluminum bodies that are bright-anodized for great looks and durability. Each shock is dyno-tested for consistency and comes with chrome or zinc plated mounting hardware. Order the model recommended for your vehicle application.
( 344 )
$179.95
—
$214.95
Lokar Hi-Tech kickdown kits are made with an extruded liner for extended life--and are available in either stainless steel braided housing, black stainless steel braided housing, or black housing. They feature matching aluminum fittings and ferrules to help eliminate frayed ends and are adaptable to all types of manifolds, including tunnel ram, blower manifolds, and multiple-carburetor systems. Order the Lokar Hi-Tech kickdown kit designed for your transmission application.
( 465 )
$129.95
—
$184.95
Proform Mopar licensed high-torque starters spin your engine over faster than stock models. These high-output motors deliver 40 to 50 percent more cranking power, and they're made entirely from new—not rebuilt—components. They feature the retro-style Mopar logo and fit all Mopar V6, small block and big block engines applications from the 1950s thru early '90s. Proform Mopar licensed high-torque starters feature: • 4.41 to 1 sealed gear-reduction drive and full ball bearing construction • Gear reduction-type lightweight-style with natural finish • Cast aluminum mount • For 14.0:1 maximum compression ratio engines • 100 percent new component • Offset design for more oil pan clearance
( 36 )
$211.95
PowerStop is on a mission to deliver an easy and affordable way for any driver to upgrade their brakes--no matter where or how they use their vehicle. PowerStop Performance powdercoated brake calipers are made specifically with the enthusiast in mind. They bolt directly in place of the stock calipers, and they look and perform great behind stock or custom wheels. PowerStop calipers and the brackets are treated with an electrostatic high-temperature powdercoating. The easy-to-clean powdercoating helps to resist rust and corrosion, thus extending their life. They are 100 percent pressure-tested to verify piston operation and prevent any possible leaks from occurring, ensuring that every caliper is inspected for quality and safety. Calipers are expertly assembled using new pistons, seals, slide pins (where applicable), dust boots, bleeder screws, and stainless-steel brake pad abutment clips. High-temperature EPDM rubber dust boots and premium silicone lubricant are used for a smoother operation and an extended life in extreme conditions.
( 739 )
$160.99
—
$270.28
MagnaFlow performance mufflers are designed to provide your vehicle with more power and excellent sound. These exhaust units are available in several styles, and most feature a large-diameter, perforated stainless steel core with a straight-through design—for unrestricted flow and sound control. All contact points are lap-jointed and welded to avoid distortion or cracking at the seams. The mufflers are available in a variety of inlet/outlet diameters, inlet quantities, shapes, and finishes. Order the model that best suits your vehicle application.
( 1168 )
$118.15
—
$208.00
On Sale
Flowmaster 50 Series Delta Flow mufflers are designed to produce a mellow, deep sound. They're milder on the outside of the vehicle than the 40 Series mufflers and are significantly quieter on the inside. These mufflers combine the increased horsepower and torque you've come to expect from Delta Flow technology with the performance sound and feel that makes Flowmaster famous.
( 367 )
$169.95
—
$184.95
$152.95
—
$166.45
Fox 2.0 Adventure Series shocks are available for fitment on a wide range of trucks—including many Jeep, Chevy, GMC, Ford, Ram, Dodge, and Toyota models from 1994 and up. They're available for the front and/or rear of stock and lifted vehicles. The shocks utilize Fox's proven damping technology to provide a comfortable on-road ride and predictable off-road handling in a variety of conditions. Adventure Series shocks use a 2 in. O.D. steel body construction with a large 5/8 in. heat-treated hard chrome plated shaft for increased strength and durability. The monotube design features an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen charged gas chamber. This eliminates oil aeration for fade-free performance from the factory-tuned precision valving. Additional details: Body: 2.0 in. smooth bore and honed seamless alloy bodies Body plating: Thick silver powdercoat Internal reservoir: Internal IFP monotube reservoir design separates shock oil from the high-pressure nitrogen Shaft: 5/8 in. hard chrome plated heat-treated alloy steel Oil: JM92 Advanced Suspension Fluid for improved performance at variable temperatures Bushings: Quiet nitrile rubber allows for increased suspension articulation Mounting: Direct replacement for stock and aftermarket lifts kits
( 8 )
$109.95
Manufacturer Rebate
MagnaFlow universal catalytic converters by Car Sound form the basic building blocks for many applications. The main benefit of universal catalytic converters is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting, and tube-bending equipment that is readily available to most professional installers. They are extremely well made, with features such as: * A ribbed body that minimizes expansion and distortion when the converter heats up. They form a channel that protects the cushioning mat from direct exposure to exhaust gasses, and hold the ceramic catalyst in proper alignment. * A 1/2 in. lap joint where the necks meet the body. The neck does not extend into the converter body, where it could hamper exhaust flow. * Manufactured with separate dies on different sized inlets. Putting larger neck sizes on smaller bodies would reduce the flow of the converter and the quality of the product. * A monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. * Seam-welded close to the converter body for a strong, tight bond. Welding along the edge could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around. * Heavier-gauge stainless steel, tip-to-tip. They do not use inferior mixed weights and materials. * An aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter.
( 187 )
$114.00
—
$281.00
On Sale
These CrossWind intake manifolds from Professional Products feature identical plenum and runner designs to the Typhoon. The main difference is that there is an open area under the plenum chamber. This feature is sometimes called an air gap design. The air flowing under the plenum provides a cooler charge for the incoming air with less heat transfer from the engine. This cooler air charge provides additional power.
( 43 )
$160.99
—
$234.99
$144.89
—
$211.49
Summit Racing™ OE-style harmonic dampers are ideal for those mild street rebuilds that don't require the expense of a high-buck race damper. They feature durable nodular construction with bonded elastomer between the inner and outer rings. The balancers also have engraved timing marks, which means no timing tape! Summit dampers are available in a variety of sizes for many engine balance applications. Models are available for hundreds of vehicles; order the OE replacement recommended for your ride.
( 664 )
$116.99
Lokar premium speedometer cables feature PTFE-lined housings with machined aluminum fittings. The inner and outer housings are designed to be cut-to-fit, so they can be tailored to your needs. These kits come complete with all fittings. They're compatible with any cable-driven aftermarket speedometers, or factory speedometers with a 5/8 in.-18 male thread. Order the model recommended for your transmission application.
( 71 )
$129.95
—
$205.95
Investing in TCI transmission pans ensures the longevity of your transmission. They offer a selection of designs, depths, materials, and finishes to keep your transmission cooler and your undercarriage looking good. Skip the pans of lesser quality doomed to warp and leak; choose the policy of lasting performance from TCI transmission pans. TCI cast aluminum pans feature: * Exterior cooling fins wick away and dissipate heat * Provides additional strength and rigidity to transmission case * Ensures long transmission service-life * Include all required accessories and hardware necessary for installation TCI Max-Cool aluminum pans feature: * Black powdercoated finish * Large fluid capacity reduces internal transmission temperature * Exterior cooling fins wick away and dissipate heat * Aircraft-quality aluminum construction for strength and durability * Magnetic drain plug TCI polished die-cast aluminum pans feature: * Thicker than stock pans * Finned and polished to a high luster * Stock depth to avoid ground clearance issues * Includes drain plug for simpler fluid and filter changes * Includes necessary gaskets, filters, and installation hardware TCI chrome-plated steel pans feature: * Stock depth is easy to install * Includes drain plugs * Thicker than stock for added durability * Chrome prevents rust and adds show quality looks
( 183 )
$231.95
—
$245.95
On Sale
Rust, rocks, and road debris all take part in destroying differential covers—so Spicer Drivetrain Products introduces a line of axle-specific replacements. These kits include a new cover, plug, and installation bolts for an all-new look. They're available in a variety of materials and finishes for high strength and good looks. The differential covers are offered for the front or rear with select options for your particular application.
( 98 )
$127.99
—
$228.99
McLeod StreetPro clutch kits are excellent performance clutches for street enthusiasts. StreetPros are ideal for use with basic engine modifications, including cold-air intakes, exhaust upgrades, and engine management programming. These McLeod kits provide slightly heavier pedal effort with increased holding capacity, making them excellent factory replacement performance clutches. Order the size to match your vehicle specifications. Additional features and benefits include: * Bolt to stock flywheels * Handle up to 400 hp * Organic disc facing for smooth engagement with excellent release qualities
( 163 )
$275.00
Powermaster's highly efficient XS Torque starters feature extra-powerful motors that churn out up to 200 lbs.-ft. of torque. Coupled with their 4.4:1 gear-reduction ratio, that equals reliable cranking power for engines, up to a whopping 18.0:1 compression ratio. These starters come with a billet adapter/mounting block for durability. They'll also clear your oil pan if the OE starter did. Some models are available in a chrome plated finish. Starter dyno test results are included. Order the replacement designed for your vehicle application.
( 905 )
$241.99
Fox 2.0 shocks are available for a wide range of applications—including hundreds of Chevy, GMC, Ford, Jeep, Dodge, Ram, and Toyota trucks from the 1950s and up. These IFP (internal floating piston) replacements will upgrade the on-road comfort and off-road control of your vehicle. The monotube design's internal reservoir separates the shock oil from the high-pressure, nitrogen-charged gas chamber. The IFP eliminates oil aeration, allowing maximum performance from the factory-tuned, precision valving. FOX and BDS joined forces to custom valve each model to work perfectly with each BDS Suspension system. They're based on FOX race products but re-designed to turn your BDS-equipped truck into an off-road machine providing a predictable ride capable of handling the roughest conditions with fade-free performance. The shocks are available in a variety of extended and collapsed lengths—for fitment on trucks with zero to 8 in. of lift. Additional details: * 2 in. impact extruded and CNC-machined 6061-T6 clear anodized aluminum one-piece body resists rust over time * 5/8 in. hard chrome plated heat-treated alloy steel shaft * Race-developed high-flow piston design * Application-specific valving to maximize performance * Internal IFP monotube reservoir design
( 3 )
$199.95
Fox Racing Shox 2.0 Performance Series IFP smooth body shocks deliver race-dominating performance in a hassle-free bolt-on package. Their heat-reducing design includes a metal-impacted aluminum shock body that dissipates heat faster than conventional steel. Inside, the Internal Floating Piston (IFP) separates the shock oil from a high-pressure nitrogen gas chamber, providing a predicable ride quality capable of handling the roughest road conditions. Combine these new technologies by Fox Racing Shox, together with a competitive price—and you have a winning combination! Choose the universal or vehicle-specific model that best suits your application. Tech specs of 2.0 Performance Series IFP smooth body shocks: * Aluminum shock body dissipates heat, will resist rust over time * Clear-anodized for a durable finish * Application-specific valving to maximize off-road performance * Components: black anodized billet aluminum * Shaft: hard chrome plated heat-treated alloy steel * Race-developed high-flow piston design * Quiet nitrile rubber bushings for increased suspension articulation * Redundant sealing pack system main seal, wiper seal, scraper seal * JM92 advanced suspension fluid for improved performance at variable temperatures * Extended length applications available for stock and aftermarket lifts kits * Optional roost shield kit available (sold separately) to protect shock shaft and seals from rocks kicked up by tires Adjustments: * Nitrogen pressure * Compression valving * Rebound valving
( 63 )
$199.26
—
$229.95
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 39 )
$112.40
You don't have to sacrifice safety or quality to save money; our affordable Summit Racing™ bracket racer SFI dampers have been spin-tested to 12,500 rpm and carry an SFI-18.1 rating. The carbon steel dampers have an injection-molded and bonded elastomer, easy-to-read engraved timing marks, removable counterweights (where applicable), and a highly polished baked-enamel finish, so they look as good as they perform.
( 390 )
$177.99
Are you looking for high performance aluminum shocks on a budget? QA1 Stocker Star NA shocks to the rescue! These premium stock mount, non-adjustable shocks are small body designs that bolt right up to your factory mounts. Stocker Star NA shocks feature a twin-tube design with centerless-ground, hard chrome plated piston rods inside durable, anodized, machined aluminum bodies--just like QA1 premium shocks, but at a more affordable price. These shocks have increased valving response, control, and consistency, plus double-lip seals with wipers to eliminate seal drag and stop dirt from entering. Unlike most replacement shocks, Stocker Star NA shocks can be serviced, revalved, and rebuilt. Get high performance and a professional look at a price that you can afford with QA1Stocker Star NA shocks.
( 85 )
$179.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
