Availability
Showing In Stock Items. Show All 37 Items.
Summit Racing™ OE-style harmonic dampers are ideal for those mild street rebuilds that don't require the expense of a high-buck race damper. They feature durable nodular construction with bonded elastomer between the inner and outer rings. The balancers also have engraved timing marks, which means no timing tape! Summit dampers are available in a variety of sizes for many engine balance applications. Models are available for hundreds of vehicles; order the OE replacement recommended for your ride.
( 664 )
$116.99
That clunking sound you hear beneath your vehicle might be due to a broken exhaust hanger causing your exhaust system to bounce around. If that's the case, don't sweat it—just swap out the bad exhaust hanger with a new one from Summit Racing™. These replacement hangers are available in a variety of materials and styles to best facilitate your repair. Keep your exhaust system securely positioned and attached where it belongs, with quality hangers from Summit Racing™.
( 44 )
$8.99
Summit Racing™ battery Pro Packs combo an Optima RedTop battery, Painless battery cable kit, and a tray/hold-down kit for a complete install in your vehicle. The high performance AGM RedTop is Optima's ultimate starting battery designed to deliver a strong burst of ignition power for a reliable start-up every time. The batteries offer longer life, more vibration resistance, no maintenance, and are virtually spill proof and mountable in most any position. Painless Performance battery cable kits include a red 1-gauge positive and a black 1-gauge negative cable with lightweight abrasion-resistant insulation capable of handling over 250 amps and heavy-duty terminals already installed, side post adapters, and high-amp crimp ring terminals. Their 16 ft. length make them ideal for trunk-mounted batteries and custom installs. The battery tray/hold-downs are made from premium aluminum and chosen to match the battery in the Summit Racing™ Pro Pack selected.
Not Yet Reviewed
$537.93
Summit Racing™ Performance 4340 forged steel connecting rods come in a variety of applications and options. From a light rod street-strip cruiser to a beefy rod for a 1500 hp big block, you will find just the rod for your combination. As always, Summit Racing™ connecting rods are packed with great features at the best prices. Options and features: * Chevy, Ford, Chrysler, and Pontiac * Big and small blocks * Multiple lengths * H-beams and I-beams * Through-bolts to cap-screws * Press-fit to full-floating * Multiple grades of rod bolts from 8740 through L-19
( 38 )
$83.99
—
$709.99
Our Summit Racing™ diecast aluminum valve covers are precision-cast from high-grade aluminum. They have thick gasket rails for optimum sealing and crack resistance, available in multiple designs and finishes.
( 207 )
$310.99
—
$336.99
Summit Racing™ truck shocks are designed specifically to give your truck a factory-quality ride, both on and off-road. The twin-tube, hydraulic-action shocks feature multi-stage valving and are available for front or rear positions. They're offered in a variety of extended and collapsed lengths for stock-height and lifted applications. All truck shocks come standard with red polyurethane bushings and boots.
( 122 )
$36.99
Summit Racing™ offers Street-Strip Performance clutch kits for hundreds of cars, trucks, and vans. They're ideal for use with moderate engine modifications, including intake and exhaust upgrades, camshaft and cylinder head work, and engine management programming. These kits provide a heavier pedal effort than stock, along with improved holding capacity, making them excellent high performance replacement clutches. Order the size and options recommended for your vehicle. Additional details: * Can accommodate up to 500 hp * Dual-faced organic and ceramic disc for smooth engagement with exceptional holding capacity * Kits include a pressure plate, disc, throwout bearing (unless specified otherwise), and alignment tool
( 6 )
$328.99
You don't have to sacrifice safety or quality to save money; our affordable Summit Racing™ bracket racer SFI dampers have been spin-tested to 12,500 rpm and carry an SFI-18.1 rating. The carbon steel dampers have an injection-molded and bonded elastomer, easy-to-read engraved timing marks, removable counterweights (where applicable), and a highly polished baked-enamel finish, so they look as good as they perform.
( 390 )
$177.99
Tune-up your entire ignition at once with Summit Racing™ Volt Max X-TREME spark plug wires, cap, and rotor kits. They're made to handle extreme conditions while perfectly matching OEM specs. The ultra-low resistance wire core is wrapped in a high dielectric capacitance jacket to keep voltage directed to the plug, and is protected by a tough silicone outer jacket. Stainless steel terminals (solid brass for Ford D.I.S. applications) with hardened, positive snap-locks ensure a permanent connection, and the silicone boots can handle up to 450 degrees F of heat. The wire sets include dielectric grease to seal terminals and boots, plus wire separators (a must if your OEM wire are 7mm). Select the tune-up kit designed for your vehicle.
( 152 )
$70.98
Summit Racing™ offers Extreme Performance coated brake rotors for thousands of vehicles, from the 1960s and up. They're manufactured on CNC machines using CAD-CAM design for perfect balance and alignment, then coated with silver zinc to resist corrosion. These rotors provide you with maximum stopping power, reduced warping, and longer life. The cross-drilled holes and slots provide an exit route for gasses and dust, resulting in better heat dissipation and less brake fade under hard use. Other solid-surface rotors allow gasses to create a cushion between the pad and the brake rotor, resulting in poor brake performance. The cross-drilled holes and slots clear away harmful gasses, restoring full pad-to-rotor contact. These coated rotors are a terrific performance upgrade when replacing your brakes. Order the model recommended for fitment on your vehicle.
( 68 )
$56.99
—
$199.98
With Summit Racing™ branded, all-100 percent silicone 8mm constructed wire, a 300 ohm per foot wire-wound EMI suppression core, high-heat silicone boots, and stainless steel and brass terminals, you get all the high-end features a wire set can offer, without breaking the bank! * Dual silicone high tear-resistant jacketing with fiberglass matting gives you the highest heat protection and superior terminal pull-off values in the business * Our 300 ohm per foot wire-wound magnetic suppression core maximizes the voltage output of your ignition system, while maintaining high EMI resistance values * Stainless steel terminals with posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery * Ultra-high heat silicone spark plug boots provide superior radiant heat protection -- High dielectric strength properties virtually eliminate voltage leakage and blow through Installing our Summit Racing™ high-end 8mm sets will give you the confidence, reliability, and performance you expect from Summit Racing™ products.
( 1017 )
$38.99
Simplify your tune-ups and keep them budget-friendly with our Summit Racing™ cap and rotor kits. These affordable kits are molded from premium materials and have brass or aluminum inserts depending on application.
( 378 )
$31.99
Summit Racing™ offers replacement radiator caps for a variety of applications. These recovery-style caps feature a heavy-duty design built to handle the pressures of street/strip use. They're compatible with many engine designations, and are available in pressure ranges up to 26 psi. Order the cap preferred for your engine bay.
( 89 )
$5.99
—
$6.99
Don't ignore the signs! A clunking and clanging noise, intense vibrations at accelerated speeds ... it could be an indication of a failing U-joint. If that's the diagnosis, here is the solution--replace it with one of our Summit Racing Equipment® U-joints. These drivetrain components are engineered from quality materials to meet or exceed OE standards, and are available in applications with forged and case-hardened alloy steel crosses for lasting service life. The bearing cups are case-hardened for strength and durability, and superior seals help keep contaminants out and allow for proper lubrication. Plus, a grease fitting in the cross body allows for easy maintenance. Select your part application and install it to avoid complete U-joint failure--problem solved!
( 32 )
$14.99
—
$34.99
Summit Racing™ link bar hydraulic lifters are drop-in retrofit lifters designed to allow conversion to street hydraulic roller camshafts. These lifter bodies are machined from cold formed steel with clipped axles. They feature .700 in. diameter wheels and are designed for street use up to 6,500 rpm.
( 18 )
$650.99
Dress up your engine compartment while keeping oil in its place and the dirt at bay with Summit Racing™ valve cover oil fill caps. They're manufactured from high-quality material, providing a proper fit and seal to prevent oil loss. These round, steel caps are available to fit a variety of applications, including GM, Mopar, Ford, AMC, Jeep, and other make/model vehicles. Whatever your part needs, chances are Summit Racing™ has it!
( 38 )
$4.99
A Summit Racing™ plastic/aluminum radiator gives your engine bay the current cooling update it needs. These units are designed for premium performance, while fitting your vehicle's original mounts, so your ride can have a new radiator without modifications to the brackets and fittings. The radiators are available in various sizes and styles to fit your application. Efficient and economical, Summit Racing™ replacement radiators are an excellent option to restore the cooling performance your vehicle requires.
( 83 )
$185.99
—
$263.99
Need better temperature control? Summit Racing™ Classic OEM heater cores will get your heater and defroster functioning properly once again. Designed to perform and built to last, our heater cores feature either aluminum or copper/brass construction and high-strength alloys to resist corrosion to serve you longer. They also offer an OE fit to make your installation easier. Keep your vehicle cabin warm with Summit Racing™ Classic OEM heater cores.
( 256 )
$59.99
Replace your stock exhaust with one of these free-flowing exhaust systems from Summit Racing™. They're designed to clear trailer hitches and spare tires, unless otherwise noted. Our cat-back systems feature mandrel-bent aluminized tubing, single or dual outlets, turbo, chambered or glasspack mufflers, and all hardware needed for the installation. Nearly a hundred kits are available; order the model recommended for fitment on your vehicle.
( 853 )
$334.99
—
$435.99
These heavy-duty Summit Racing™ balancer bolts are the best way to bolt on your damper. As the crankshaft flexes and twists, the damper absorbs a lot of kinetic energy. To ensure that the damper stays on tight, these bolts include a thicker flat washer, machined perfectly flat to spread the fastening load over a greater surface area. They're manufactured from premium materials for maximum strength and feature a quality finish for good looks.
( 116 )
$15.99
Our Summit™ high-output ignition coils give you additional volts of spark energy in a simple, direct replacement package. These coils mount in the stock location with no special mounting needed, but have a lower primary resistance, higher rpm capability, and greater output than stock. They're available in a variety of styles, both universal and application-specific, and can be ordered individually or in sets.
( 371 )
$41.99
Summit Racing™ extended-life oil filters keep your engine free from contaminants. Our canister-style filters feature proprietary synthetic filter media that offers high filtration and low restriction—longer. These economical oil filters deliver up to 10,000 miles of engine protection. Order the model recommended for your vehicle and engine application. Summit Racing™ extended-life oil filters feature: * Durable 0.5mm thick steel canister for withstanding high operating pressures * High-capacity can design for trapping and holding dirt * 98 percent multi-pass particle removed efficiency * High-quality pressed steel baseplate * Silicone sealing gasket * Roll-tap formed threads to help prevent vibration fatigue * Silicone anti-drain-back valve that protects engine during start-up * Filter bypass relief valve if filter media becomes blocked * Textured powdercoating to ensure durability and deliver enhanced grip * Protective film over filter opening to prevent debris from contaminating filter prior to installation
( 41 )
$7.99
These Summit Racing™ magnetic drain plugs will catch metal particles before they get to your bearings, saving you from early engine, transmission, or gear failure.
Not Yet Reviewed
$4.99
Summit Racing™ offers Race Series rod bearing sets for a wide range of applications—including many Chevrolet, Buick, Ford, Ram, Jeep, Dodge, Chrysler, and Plymouth small block, big block, and Hemi engines from 1955 and up. The bearings provide a low-friction pivot point between the connecting rod and the crankshaft, and the connecting rod and piston. They keep the crankshaft and connecting rod in place as they rotate. These performance replacements are machined from tri-metal copper-lead alloy and are available in numerous engine crankshaft undersize options. Order the set recommended for your vehicle.
( 2 )
$115.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
