Availability
Showing In Stock Items. Show All 8 Items.
On Sale
Auburn Gear Select-A-Loc differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! When locker switch is off, the clutch pack activates the limited-slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed, in turn providing bias torque to the highest traction wheel. When the locker switch is turned on, electronic current is sent to the electromagnetic coil which locks the axles together. Auburn Gear Select-A-Loc lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile or nasty off-road terrain, Auburn Gear Select-A-Loc differentials deliver superior traction capabilities on the street, at the track, or off-road.
( 10 )
$1,175.99
—
$1,444.99
$1,058.39
—
$1,300.49
On Sale
If you're seeking exciting performance out of a drop-in-and-go unit, then you need Fleece Performance Cheetah FMW HX35 turbochargers. They feature a high-flow turbine wheel, a 63mm FMW compressor, and reduced EGTs. These turbos do not require specialized tuning, and yet they provide quick response, excellent overall drivability, and support up to 650 RWHP. Whether you want more seat-of-the-pants performance, or torque for towing, Fleece Performance Cheetah FMW HX35 turbochargers have you covered. Important application information: Customers with 1994-2002 vehicles need to look at the pictures of part numbers FLE-FPE-HX35-GTC, -LWG, and -SWG and compare the wastegate orientation and bracket on stock units to find the correct turbo. Refer to the Notes section for additional information.
Not Yet Reviewed
$1,699.00
$1,444.15
On Sale
Fleece Performance CP3K fuel pump kits are a valuable lesson in supply and demand. Simply put; your diesel engine's demand for more fuel cannot be supplied by your stock CP3 pump, thus its' time for a new supplier--CP3K. These modified pumps are engineered to eliminate the factory fuel flow restriction that usually begins at 3,000 rpm. Your stock pump at this point starts losing fuel flow and rail pressure, which equates to loss of horsepower when you need it most. Reverse the trend; maintain the desired fuel rail pressure through your entire rpm range with cost-effective Fleece CP3K fuel pumps.
Not Yet Reviewed
$1,299.00
—
$1,349.00
$1,104.15
—
$1,146.65
On Sale
Fleece Performance Cheetah Holset turbochargers are 100 percent drop-in, bolt-on, and enjoy big top-end power units. These turbos provide quick and smooth throttle response, lower EGT's, and stock-like spooling with 40 to 45 psi operating range. They use a high-flow turbine wheel and Fleece's 63mm billet compressor wheel in order to support up to 650 rwhp. Give your diesel truck the kind of bolt-on performance most vehicles only dream of—with Fleece Performance Cheetah Holset turbochargers!
( 3 )
$1,847.50
$1,570.38
On Sale
BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection * Upgraded ARP 625+ bolts (260,000 to 280,000 psi) available
( 1 )
$1,294.99
$1,165.49
On Sale
Edge Products' Juice modules with Attitude CTS3 programmers are the ultimate tuner for the average diesel owner and horsepower junkies too! Featuring state-of-the-art CTS3 technology, the Juice with Attitude offers a whole new realm of features to continue pushing the limits of on-the-fly power, control, and monitoring. This in-cabin controller not only monitors vital vehicle parameters but allows you to shift-on-the-fly by controlling the Juice module for maximum control and power gains. If you own a diesel truck and you're looking for complete control over your driving experience, look no further than Juice with Attitude CTS3 programmers. Additional product attributes: * Slim, sleek case with state-of-the-art swipe technology * 5 in. full color, high-resolution touchscreen with the latest swipe technology (with one-touch easy menu navigation) * Light sensitivity meter to dim screen as ambient light decreases * HDMI style plug for power and linking EAS accessories * Custom color mixer for gauge arcs, needles, and backgrounds * Multiple gauge layouts, including on-the-fly power level adjustment on screen * Wi-Fi updates and notification center * Multiple power levels for mileage, towing, daily driving, performance, and extreme power curves * Additional Hot Unlock available for some applications for an additional power level * Up to 180 hp and 400 torque gains, depending on application * Dynamic built-in safety features like EGT backdown, cold engine protection, transmission slip backdown and more Note: Some features may vary by make/model/year. Configure your vehicle to search for parts and features specifically for your application.
Not Yet Reviewed
$1,299.95
—
$1,549.95
$1,168.95
—
$1,393.95
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 106 )
$1,549.95
$1,393.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
