Availability
Showing In Stock Items. Show All 180 Items.
ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity. They're heat-treated prior to thread rolling and machining. ARP Pro Series kits are also available with 12-point nuts, and all studs come complete with hardened parallel washers for an even load distribution and accurate torque readings. With hundreds of models ready to ship, these cylinder head fasteners can be ordered for virtually any style engine.
( 786 )
$461.99
—
$1,247.99
Whether you're building a tow rig, race truck, or just want to keep your daily driver on the road for the long haul, you need to upgrade your head bolts with Gator Fasteners heavy-duty head stud kits. Gator head studs have a much higher strength and will not stretch like the factory bolts, helping to keep your truck from popping head gaskets. Designed for stock to moderately built engines. Gator studs are manufactured with 8740 material with an added proprietary element and black oxide finished. They are rated at 220,000 psi tensile strength, providing the clamping force required to keep cylinder heads from lifting due to higher combustion pressures. Choose the head stud kit designed for your truck.
( 2 )
$424.99
System 1 has eliminated the need for disposable oil filters. Built from durable anodized aluminum housing, System 1 filters feature a washable, stainless steel element that can be used over and over again. They can be completely disassembled for inspection, revealing metal shavings and residue that could indicate engine wear or damage. System 1 oil filters are perfect for daily drivers, fleet vehicles, and race and marine applications.
( 16 )
$190.00
—
$304.00
Using only three parts (a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two), SFI-approved Fluidampr harmonic dampers can control all crankshaft vibration--not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.
( 138 )
$574.82
—
$622.62
PRW Dodge Cummins rocker arm systems are the perfect upgrade to provide more power and run your diesel engine more efficiently. Each rocker is made from alloy steel substantially stronger than stock. PRW Cummins shaft systems are manufactured to exceed OEM specifications as a "drop in" assembly using the stock arm ratios. The upgraded rocker arm systems are complete with everything you need, from ball adjusters and fasteners, along with silicon bronze bushings instead of OEM-style needled bearings for prolonged life expectancy. Note: some applications are pre-machined for high performance cylinder head stud kits.
( 1 )
$542.77
—
$679.93
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 38 )
$80.28
—
$112.40
Lares power steering pulleys are designed to fit your OEM pulley setup. Manufactured from quality materials, and available for a wide variety of applications, each power steering pulley meets OE specifications to ensure a precise fit and proper function. Keep your steering system operating reliably, order the Lares power steering pulley in the application you need.
( 20 )
$21.99
—
$24.99
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 251 )
$90.99
ARP Pro Series connecting rod bolts are precision CNC-machined to exacting specifications and designed for optimum reliability. They are heat-treated and threads are rolled to provide up to ten times more fatigue strength. This makes them far superior to standard OEM fasteners in terms of durability, and fully capable of handling the extra stress of high-combustion engines.
( 67 )
$176.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 134 )
$158.99
—
$208.99
Dorman offers replacement EGR gaskets in a variety of styles, materials, configurations, and kit contents. Exhaust gas recirculation (EGR) is actually an emissions reduction technique used in gasoline and diesel engines. The system works by recirculating a portion of the engine's exhaust gas back into the engine cylinders, diluting the oxygen and providing gases that benefit combustion. The Dorman heat-resistant gaskets seal the EGR valve where it connects to the exhaust system. Order the gasket or kit recommended for your vehicle application.
Not Yet Reviewed
$180.95
Is your crankcase breather filter clogged up with oil? Replace it with a new one! Dorman steel crankcase breather filters are designed to allow for proper crankcase ventilation for more efficient filtering and air circulation.
( 1 )
$92.95
Trust Fleece Performance to bring you the best OE alternative parts you need! Their replacement rocker arm assemblies are direct-fit replacements for specific Cummins engines that meet or exceed OE specifications. Service your diesel with the help of Fleece Performance.
Not Yet Reviewed
$119.99
ATI Super Damper diesel harmonic balancers are designed with absolute precision in mind and are one of the highest quality harmonic balancers purpose-built for Cummins, Duramax, and Power Stroke diesel engines. These dampers eliminate torsional vibration at the crankcase to significantly reduce wear on your engine, as well as allow power to come on much quicker and smoother to balance out the engine. ATI Super Damper diesel harmonic balancers are tunable, serviceable, and SFI-approved!
( 8 )
$543.65
Aeroquip quick-drain oil pan couplings are great for street rides, hot rods, race cars, or anything else that you need to cleanly drain fluid from efficiently. They eliminate the potential for spillage by draining directly into a waste container and make changing your oil quick, clean, and fun.
( 11 )
$72.99
Fluidampr Cummins full power kits are designed for use in 1989 and newer 5.9L / 6.7L Cummins performance engine builds above 700 hp and 1,250 lbs.-ft. of torque. The kits are highly recommended for drag racing and sled pulling. For applications above 3,500 rpm, use in conjunction with a Fluidampr Cummins drill pin kit. Unleash all the horsepower of your modern diesel engine with a Fluidampr Cummins full power kit. Features and items: * 1/2 in. thick torque plate with textured finish mounts between the damper face and bolts to provide a wider, stronger clamping surface * Torque plate incorporates a 5/8 in. hex head for barring the engine over * Heat-treated, high-strength extended length ARP bolts * Diamond-impregnated friction washer
Not Yet Reviewed
$230.62
All American Billet serpentine kits are perfect for cleaning up your engine compartment and giving it a fresh look. These kits come standard with high performance accessories. If you need to replace your belt system or just want to show off to your friends these All American Billet serpentine kits will do just that! Installation is easy with all the hardware and necessary components included in the box. A variety of different setups are available to fit models with or without power steering and air conditioning.
( 15 )
$2,295.00
—
$2,395.00
ARP main stud kits help eliminate main cap walk/fretting and protect the threads in your engine block. They include studs made from 8740 chromoly steel and heat-treated in-house to 190,000 psi tensile-strength rating. The precision J-form threads are rolled after heat-treat for much stronger threads than the competition. Kits come complete with hardened parallel-ground washers and high-quality nuts. Add confidence in the strength of your engine build with the ARP main stud kit designed for your application.
( 386 )
$253.99
—
$282.99
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 162 )
$22.99
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 284 )
$13.99
—
$15.99
Hamilton Cams Cummins Tappets are solid valve lifters and are available for Cummins 24-valve and 12-valve 6-cylinder engines. They are also offered for Cummins 4BT 4-cylinder (8-valve) engines. Cast tappets for 6-cylinder engines feature a 1.450 in. diameter and do not interfere with the fuel pump eccentric on 12-valve engines. Much wider than the 1.100 in. tappets used in early 12-valve engines, their greater surface area makes them perfect replacements. These 24-valve and 12-valve tappets work well with the wider lobes of Hamilton Cams camshafts and promote much better lobe life with today's low zinc oils. For use over 5,000 rpm, with heavy valve springs, or a billet steel cam, Hamilton Cams offers 1.450 in. steel tappets. They are specially designed and manufactured to handle the higher pressures, rpm, and loads of competition use. Hamilton Cams Cummins 4BT tappets have a 1.300 in. diameter; much wider than many 4BT tappets that are only 1.10 in. These cast 1.300 in. tappets allow the pressures between the camshaft and the tappet to be spread over a significantly larger surface area to reduce lobe and lifter wear.
( 1 )
$169.99
Fluidampr harmonic balancer installation kits are designed for the Cummins diesel owner that wants to ensure that their viscous harmonic damper stays exactly where it is installed. The special alloy heat-treated, high-strength extended length bolt(s) from ARP provide secure mounting, and a thick diamond-impregnated friction washer provides an increased surface contact area between the crankshaft and the damper. For secure installation and peace-of-mind when further modifying your diesel engine, choose Fluidampr harmonic balancer installation kits. Order the harmonic balancer installation kit to fit your application needs.
( 3 )
$141.32
Summit Racing™ Cummins retrofit trunnion kits are designed to help eliminate rocker body wear by converting the trunnion to a bushed-style assembly. The trunnions are manufactured from micro-polished hardened steel, and the bushings are made from bearing bronze. Oil-flow channels are machined in the trunnions to ensure adequate lubrication to the bushings. For diesel power and performance, upgrade to a Summit Racing™ retrofit trunnion kit.
( 4 )
$262.99
As the crankshaft flexes, the balancer absorbs incredible amounts of energy. ARP balancer bolt kits will ensure that your balancer is locked into position. They feature a 12-point head that accepts a deep socket to eliminate the fear of stripping the head.
( 618 )
$37.99
—
$44.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
