Availability
Showing In Stock Items. Show All 26 Items.
Banks Power Monster-Ram intake elbows may look unassuming, but these simple, direct-replacement elbows provide instant power, performance, and acceleration gains! Designed to improve airflow from the intercooler, these air inlets raise boost without increasing backpressure at the turbine. Banks used the latest in electronic computational fluid-dynamic technology to create a larger, less restrictive design than the stock intake. Simply put, Monster-Ram intake elbows allow for a greater flow of oxygen-rich, cooler, denser air into your cylinders for instant torque, responsiveness, and greater fuel economy! Banks Monster-Ram intake elbows provide up to six ports for water, methanol, propane, and nitrous injection, or pressure/temperature sensors—the possibilities are unmatched for performance expandability. Tested on the flow bench, and dyno and real-world proven, Banks Monster-Ram intake elbows unleash the free-breathing power that your engine is craving! Order the model designed for your vehicle application.
( 28 )
$998.00
S&B Filters cotton filter cold air intake kits are designed to improve airflow and bring down the temperature of the air that enters your engine. To achieve more airflow S&B oiled cotton filters are built with four or eight layers (for diesels) of the highest-quality cotton gauze. They use deeper and wider pleats with more pleats per filter. Plus, their manufacturing process yields filters with almost no "bleed", creating a greater open surface area. All of this adds up to more surface area per filter, and that means more airflow with excellent protection. All S&B cotton air filters are washable and reusable and will protect your engine from harmful dirt and debris. Your rig will not only gain performance, but also a sporty high-tech appearance under the hood. In addition, the filters and couplers are made with silicone rubber, not urethane, to help ensure they won't degrade or crack and can resist temperatures as high as 400 degrees F. These intake kits are simple to install, and the great looking signature clear lid allows visual inspection of your filter at all times. Remember, there are good air intakes … and then there are the better intakes--demand the better; choose the efficiency and style of S&B Filters cold air intake kits. Features include: * Helps balance air/fuel ratios to improve gas mileage * Specially-crafted cross-linked intake tube minimizes restriction * Custom air box keeps loose dirt and turbulent underhood air out of your intake * Custom-made for your specific year, make, and model * Easy-to-use installation instructions and illustrations * With the included mounting hardware, replaces your stock tract in 30 minutes or less
( 432 )
$349.00
Have you always wanted a cold air intake with a disposable filter--without sacrificing performance? S&B Filters dry filter cold air intake kits offer airflow comparable to their cotton filters with the same great protection. They typically last for 15,000 miles of highway driving and you can extend the life of the filter by blowing it out with compressed air (up to three times). Your rig will not only gain performance, but also a sporty high-tech appearance under the hood. In addition, the filters and couplers are made with silicone rubber, not urethane, to help ensure they won't degrade or crack and can resist temperatures as high as 400 degrees F. These intake kits are simple to install, and the great looking signature clear lid allows visual inspection of your filter at all times. Remember, there are good air intakes … and then there are the better intakes--demand the better; choose the efficiency and style of S&B Filters cold air intake kits. Features include: * Helps balance air/fuel ratios to improve gas mileage * Specially-crafted cross-linked intake tube minimizes restriction * Custom air box keeps loose dirt and turbulent underhood air out of your intake * Custom-made for your specific year, make, and model * Easy-to-use installation instructions and illustrations * With the included mounting hardware, replaces your stock tract in 30 minutes or less
( 56 )
$349.00
K&N 57 Series FIPK cold air intake kits are designed to eliminate air path restriction and deliver a massive amount of air into your engine, resulting in more power. These fuel injection performance kits are guaranteed to increase horsepower. They are engineered for specific vehicles to replace the OEM setup, including those with computer systems. The air filter element is washable and reusable, lasting up to 100,000 miles before service is required (driving conditions dependent). Where applicable, protective heat shields and hardware are included with installation designed to use factory holes and mounting points for easy installation. The air must flow—and it will when you order the K&N 57 Series FIPK cold air intake kit best suited for your application!
( 723 )
$350.99
—
$351.99
AEM Brute Force HD cold air intake kits are specifically designed for large-displacement engines and are dyno-tested to deliver more torque and horsepower than every other intake system on the market. They're constructed from CNC mandrel-bent 6061 aluminum and feature reinforced TIG-welded brackets and fittings for maximum durability. Each system is tuned to be application-specific and deliver maximum torque and horsepower at every throttle position. For superior filtration, AEM utilizes an extra-large, proprietary, 4-layer cotton gauze element that reduces restriction without compromising filtering capability. AEM also includes a heavy-duty stainless steel heat shield, a complete hardware kit, and installation instructions. Order the kit for your application needs.
( 1 )
$299.99
—
$386.99
Gain more control over your boost with these aFe BladeRunner wastegate actuators. The actuator controls when your wastegate is open or shut so that your turbo is able to maintain its maximum boost level throughout the rev range. These actuators have been developed to be direct OEM replacement parts that bolt up to the same location as your stock, but have been preset to 40 psi and require little to no adjustment. The body is made out of durable T6061 aluminum and features a black anodized finish that looks great and helps to protect them from heat and the elements. The fully adjustable actuator arm makes fitment and adjustments easy. Don't waste any more boost or power--upgrade to one of these aFe BladeRunner wastegate actuators today.
( 2 )
$266.70
aFe Magnum Force Stage 2 Pro 5R air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. These Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, oiled, conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. In addition, a pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter.
( 70 )
$433.00
BladeRunner intake manifolds from aFe Power provide smooth and direct airflow for minimal pressure loss and maximum CFM gains. How do they do it? With innovative MDV technology that uses smooth bends and directional vanes to form multiple paths through the manifold. These paths are smoother and shorter, producing much smaller dead air zones, for increased overall airflow to the engine. You can also expect faster turbo spool-up, improved boost pressure, and an increase in horsepower and torque! BladeRunners are available in configurations for a wide range of vehicles from the 1990s and up. Additional features include: * Proprietary internal bolt design guaranteed not to deform or leak * Cast A356-T6 aluminum construction * Up to 5 port pads (depending on application) threaded for 1/8 in. NPT * Stainless steel hardware
( 5 )
$498.75
—
$561.75
aFe Quantum Pro Dry S cold air intake systems are the latest in airflow technology. From the uniquely integrated filter-to-housing design, to the state-of-the-art lightweight injection-molded base and top Pro Dry S filter, Quantum delivers dyno-proven performance gains, convenience, value—and installs in minutes. Order the model recommended for your vehicle and engine application. aFe Quantum Pro Dry S systems include: * Quantum Pro Dry S performance air filter * Dyno-tuned intake tube * Silicone bellows coupling * Necessary hardware * Filter housing * A hassle-free installation
( 3 )
$372.00
Let your engine breathe with Mishimoto induction hoses. Offering an upgrade in both performance and style, the hoses are constructed from a combination of high-grade silicone, embedded heat-resistant fibers, and steel ring or wire reinforcements. Depending on your choice, you may also have CNC ports and high-quality worm gear clamps, as well as a choice of colors to complement your engine compartment. They retain the stock fitment and will promote improved airflow, increased power, and enhanced throttle response. Durable and good looking Mishimoto induction hoses elevate performance above your restrictive OEM hoses.
Not Yet Reviewed
$157.95
aFe Momentum HD Pro 10R air intake systems are designed to give your Cummins, Power Stroke, or Duramax the air it demands. All Momentum HD systems are application-specific, dyno-tested, and tuned to provide maximum horsepower and torque. The Momentum HD Pro 10R intakes are designed around massive, 1,000 cfm, 360 degree, radial-flow air filters with ten layers of progressive cotton media providing 99.59 percent cumulative efficiency (independently tested). Their unique air filter-to-housing interface allows for maximum filter size that increases the available air volume while simplifying the installation process. In addition, the air filters are wrapped in reinforced metal providing maximum strength to help to prevent filter collapse. Features and benefits include: * Larger filter—more capacity * One-piece sealed housing uses factory mounting points for hassle-free installation * Large, clear sight window for hassle-free filter inspection and aggressive style * High-quality, CAD-designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit * Premium clamps and a silicone elbow coupling for flexibility and secure installation * Most systems are available with an auxiliary air scoop (sold separately) * Urethane plug included to block off the auxiliary air inlet and completely seal the air box * Ideal for extreme performance without compromising style * Patent pending air filter-to-housing interface design
( 6 )
$420.00
aFe Quantum Pro 5R cold air intake systems are the latest in airflow technology. From the uniquely integrated filter-to-housing design, to the state-of-the-art lightweight injection-molded base and top Pro 5R filter, Quantum delivers dyno-proven performance gains, convenience, value—and installs in minutes. Order the model recommended for your vehicle and engine application. aFe Quantum Pro 5R systems include: * Quantum Pro 5R performance air filter * Dyno-tuned intake tube * Silicone bellows coupling * Necessary hardware * Filter housing * A hassle-free installation
( 1 )
$361.00
Maximum flow and minimum turbulence—ATS Diesel Performance ArcFlow intake tubes deliver smooth, non-restrictive airflow! Their gradual expansion chamber design allows the air to gradually expand, as opposed to an abrupt expansion, so the air continues on its path without a "tumbling" affect. The extremely efficient ArcFlow intake tubes mean your rig will experience lower EGTs, quicker turbo spool up, and better throttle response. ATS ArcFlow intake tubes features and benefits: * Increased intake efficiency * Increased air velocity * Eliminates air turbulence * Increased throttle response, torque, and horsepower * Increased fuel economy * Gains of up to 15 hp and 30 lbs.-ft. of torque * Pre-tapped for boost gauge, water/methanol injection, nitrous injection, or anything you want to add or monitor * Will not void your factory warranty
( 1 )
$317.13
aFe Momentum HD Pro Dry S air intake systems are designed to give your Cummins, Power Stroke, or Duramax the air it demands. All Momentum HD systems are application-specific, dyno-tested, and tuned to provide maximum horsepower and torque. The Momentum HD Pro Dry S intakes are designed around massive Pro DRY S performance 360 degree, radial-flow air filters with three layers of progressive synthetic media providing 99.2 percent cumulative efficiency. Their unique, patent pending, air filter-to-housing interface allows for maximum filter size that increases the available air volume while simplifying the installation process. In addition, the air filters are wrapped in reinforced metal providing maximum strength to help prevent filter collapse. Features and benefits include: * Larger filter—more capacity * One-piece sealed housing uses factory mounting points for hassle-free installation * Large, clear sight window for hassle-free filter inspection and aggressive style * High-quality, CAD-designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit * Premium clamps and a silicone elbow coupling for flexibility and secure installation * Most systems are available with an auxiliary air scoop (sold separately) * Urethane plug included to block off the auxiliary air inlet and completely seal the air box * Ideal for extreme performance without compromising style
( 2 )
$433.00
aFe Magnum Force Stage 1 Pro Dry S air intake systems are designed to bring you maximum performance in minutes. They feature an enclosed, durable heat shield, and a washable and reusable Pro Dry S air filter that results in an impressive gain in torque and horsepower. aFe Magnum Force Stage 1 Pro Dry S air intake systems are also simple to install taking just minutes of your time to improve your ride.
( 2 )
$384.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
