Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
DODGE Cummins diesel inline 6-cylinder Fleece Performance Parts and Accessories
Showing In Stock Items. Show All 56 Items.
Fleece Performance Cheetah Holset VGT Turbochargers
Fleece Performance Cheetah Holset VGT turbochargers will lower EGT's, supply top-end power, and provide quick and tight throttle response. They don't require an installation kit; however aftermarket off-road tuning and free-flowing exhaust are required. These drop-in replacement turbochargers have 63mm billet compressor wheels, a high-flow turbine wheel, and can support 650 rwhp. They provide spooling similar to stock and an operating range of 40 to 45 psi. When on the prowl, having fun, working for your meal, or racing others, enjoy the spirit of your turbo's namesake—Fleece Performance Cheetah Holset VGT turbochargers.
( 1 )
$3,099.00
Fleece Performance Cheetah Holset Turbochargers
Fleece Performance Cheetah Holset turbochargers are 100 percent drop-in, bolt-on, and enjoy big top-end power units. These turbos provide quick and smooth throttle response, lower EGT's, and stock-like spooling with 40 to 45 psi operating range. They use a high-flow turbine wheel and Fleece's 63mm billet compressor wheel in order to support up to 650 rwhp. Give your diesel truck the kind of bolt-on performance most vehicles only dream of—with Fleece Performance Cheetah Holset turbochargers!
( 3 )
$1,898.99
—
$1,899.00
Fleece Performance PowerFlo In-Tank Lift Pump Assemblies
PowerFlo is the latest OEM replacement performance in-tank lift pump from the diesel experts at Fleece. It's the only in-tank lift pump capable of supporting up to 800 hp, including dual CP3 pump configurations! The PowerFlo assemblies retain the factory water-in-fuel sensor, factory fuel heater, and factory fuel lines—and installation takes half the time of other high-flow pumps. Two is always better than one, and the PowerFlo delivers with two OEM-quality gerotor pumps, increasing flow capacity and reliability over the factory pump. The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the 1/4 tank issues typically encountered when seeking a higher flow lift pump to meet your engine's need. Order the Fleece Performance PowerFlo in-tank lift pump assembly recommended for your vehicle.
( 8 )
$765.80
—
$1,049.00
Fleece Performance Cheetah FMW HX35 Turbochargers
If you're seeking exciting performance out of a drop-in-and-go unit, then you need Fleece Performance Cheetah FMW HX35 turbochargers. They feature a high-flow turbine wheel, a 63mm FMW compressor, and reduced EGTs. These turbos do not require specialized tuning, and yet they provide quick response, excellent overall drivability, and support up to 650 RWHP. Whether you want more seat-of-the-pants performance, or torque for towing, Fleece Performance Cheetah FMW HX35 turbochargers have you covered. Important application information: Customers with 1994-2002 vehicles need to look at the pictures of part numbers FLE-FPE-HX35-GTC, -LWG, and -SWG and compare the wastegate orientation and bracket on stock units to find the correct turbo. Refer to the Notes section for additional information.
Not Yet Reviewed
$1,698.98
Fleece Performance Silicone Turbo Drain Tube Kits
Eliminate the installation headaches associated with non-flexible OE drain lines with Fleece Performance silicone turbo drain tube kits. Each kit features a larger inner diameter, smooth silicone hose for longevity and durability, and black anodized billet aluminum flange with integral O-ring for leak-free performance. Fleece's patent pending drain hose simplifies turbocharger installation and will ensure proper oil drainage from your turbocharger. Kits include new fasteners and are designed for use with all Cummins equipped Dodge Ram factory-style turbochargers, VGT or HX35 and HY35-style turbochargers, as well as aftermarket drop-in replacements, like Fleece's Cheetah Series. Choose the turbo drain line kit designed for your Cummins.
( 4 )
$98.90
—
$99.99
Fleece Performance S400 Intercooler Adapters
When installing a Fleece Performance S400 turbo with intercooler, you're going to need the proper adapters. These 90-degree discharge adapters include a clamp and O-ring to ensure you get the proper seal. Don't lose out on performance!
( 1 )
$58.53
Fleece Performance Replacement Rocker Arm Assemblies
Trust Fleece Performance to bring you the best OE alternative parts you need! Their replacement rocker arm assemblies are direct-fit replacements for specific Cummins engines that meet or exceed OE specifications. Service your diesel with the help of Fleece Performance.
Not Yet Reviewed
$119.99
Fleece Performance Heater Core Hose Kits
Eliminate the troublesome and leaky quick-connect heater core line on your truck with the latest OEM+ solution from Fleece Performance. Their heater core replacements hose and fitting kits are direct replacements for the problematic stock hose and quick-connect style fitting. The silicone hose and stainless steel fitting will provide a reliable solution to fix the leaks once and for all. Fleece kits include Permatex thread sealant and two new hose clamps.
Not Yet Reviewed
$69.99
Fleece Performance Turbo Oil Feed Lines
Fleece Performance turbo oil feed lines ensure that your system gets an adequate oil supply. They offer replacements for your OE setup, as well as remote kits that prevent premature bearing failures. All include extra-flexible, smooth bore PTFE hose and high-quality fittings. The remote kits will also include a stock oil feed plug and an oil galley rifle fitting. Whether you're replacing or upgrading, Fleece Performance turbo oil feed lines are available for your application.
( 1 )
$69.99
Fleece Performance Valve Spring and Retainer Kits
Upgrade your Cummins valve springs and retainers with Fleece Performance spring and retainer kits. They are manufactured from "super clean" high-tensile chrome silicon steel with a proprietary multi-step heat treating process that minimizes load loss. The springs have a seat pressure of 105 lbs. with an open pressure of 195 lbs. at maximum lift. The retainers are through hardened 4140 chromoly steel and have a black oxide finish. Please note: Retainer locks are not included.
Not Yet Reviewed
$499.99
Fleece Performance Coolant Bypass Kits
Fleece Performance coolant bypass kits meet the demands for more cooling that comes with increased horsepower. Your engine cooling system was designed to handle a 300-350hp engine. When you increase the power, you increase the demand on your cooling system and the possibility of problems that may lead to failure. Fleece coolant bypass kits feature a secondary thermostat that operates on temperature--not excessive pressure--solving excessive pressure problems before they become an issue by ensuring consistent temperatures across all six cylinders. Each kit includes high-quality AN O-ring fittings and AN hose connections with braided hose to ensure a leak-free installation. When there's a need for better performance, you can rely on coolant bypass kits from Fleece to supply the necessary components for assured greater performance.
( 7 )
$379.00
—
$399.99
Fleece Performance Turbo Drain Tube Kits
Put the finishing touches on your truck with high-quality Fleece Performance turbo drain tube kits. The tubes are braided stainless steel for durability on the exterior, and reinforced with rubber tubing for flow and maximum flexibility. The kits contain everything you need to connect an S300/S400 turbo drain back to the factory drain location on the Cummins block when using a fixed vane geometry turbo. Kit contains: * Drain tube (20 in. end-to-end) * Cummins turbo drain tube adapter * Turbo drain flange adapter * Turbo drain gasket * 7/8 in.-14 to -10 AN fitting * Two 3/8in.-16 flange head bolts * Two 10mm x 1.5 flange head bolts
( 3 )
$99.95
Fleece Performance Wiring Pigtails
Fleece Performance offers wiring pigtails and replacement connectors for a wide range of vehicles—including many Dodge, Chevrolet, GMC, Ford, and Ram models from the 1990s and up. These replacement parts are ideal for sensors, starter solenoids, cooling fans, and other components under the hood. Fully automated in-house wire cutting and terminal crimping ensure you get the highest quality connectors and pigtails to get your car or truck back on the road quickly. Order the model that corresponds to your electrical application.
( 4 )
$17.99
—
$59.99
Fleece Performance Turbo Drain Adapters
Put the finishing touch on your truck by easily connecting the turbo to the factory drain location on your Cummins block with high quality Fleece Performance drain tube adapters.
( 3 )
$19.99
Fleece Performance Dual Pump Hardware Kits
Fleece Performance offers dual pump hardware kits for a variety of diesel trucks. Kits include all the components you need to begin the build of a custom Dual CP3 Fuel System on your 5.9L or 6.7L Cummins engine application. A Dual CP3 system adds an additional CP3 in conjunction with your factory pump so you can make the most of your aftermarket tuning, injectors, and other upgrades. Combine one of these Fleece hardware kits with a CP3 pump, spoked or solid pulley, Fleece fuel distribution block, and a hose and fitting kit to complete your fuel system (other components sold separately). Kit contents: * Cummins common rail Dual CP3 bracket * Cummins heavy-duty dual pump belt * Fan shroud bracket * Dual pump pulley – idler * Cummins dual pump idler pulley spacer * Cummins dual pump controller * High-pressure dual pump line (CP3 to CP3) * High-pressure CP3 fitting and non-return valve * (6) M8 x 1.25 flange nuts * (6) M8 x 1.25 × 50 carriage bolts * M10 x 1.5 x 40mm flange head cap screw * M8 × 1.25 flange head cap screw * M18 x 1.5 CP3 nut Features: * Easy install kit * Exclusive pump to pump line * Increased engine performance
( 1 )
$780.00
Fleece Performance Turbine Shaft Speed Sensors
Fleece Performance turbine shaft speed sensors are the correct replacements for all 6.7L Cummins Holset turbochargers. Keep your diesel running smooth with Fleece speed sensors.
Not Yet Reviewed
$139.99
Fleece Performance Mechanical Fuel Pump Block-Off Plates
If you've upgraded from your factory mechanical lift pump to an electric pump, a Fleece Performance mechanical fuel pump block-off plate will eliminate the void left by your stock pump. These billet aluminum block-off plates come complete with the bolts, cover, and O-ring for easy installation.
Not Yet Reviewed
$34.99
Fleece Performance PowerFlo CP3 Fuel Pump Kits
You demand more and Fleece Performance PowerFlo CP3 fuel pumps will supply more. How much more? Frankly, these upgraded pumps will support 750 RWHP with the proper complementing modifications. And, not only that, they will also eliminate the factory fuel flow restriction that begins at 3,000 rpm that usually costs you horsepower when you need it most. The law of supply and demand is simple and so is your choice for pumps that supply enough fuel to back 750 RWHP--Fleece PowerFlo CP3 pumps.
Not Yet Reviewed
$1,999.00
—
$2,649.00
Fleece Performance HP Fuel Line Adaptation Kits
Fleece Performance HP fuel line adaptation kits allows you to upgrade to a newer style pump. Each kit includes a new high-pressure fuel line, high-flow feed and return fittings, and feed line and hose clamps. Convert your 5.9L CP3 to a newer 6.7L CP3-style pump with a Fleece Performance exclusive adaptation kit.
Not Yet Reviewed
$119.99
Fleece Performance Turbocharger Installation Kits
Fleece Performance turbocharger installation kits are designed to ease the installation of S300/S400 turbos. They include the necessary parts, such as studs, a turbo oil feed line, and drain tube, gaskets, and hardware. Order the model recommended for your vehicle and engine application.
( 1 )
$35.99
—
$39.99
Fleece Performance Thermostat Housings
Fleece Performance thermostat housings have an auxiliary port with plug to allow you to customize your coolant routings. Two elbow options are available as direct replacements for specific model years of RAM trucks with 5.9L or 6.7L Cummins, and in specific Fleece coolant bypass kits.
Not Yet Reviewed
$129.99
Fleece Performance Cylinder Head Dowels
Fleece Performance cylinder head dowels are for use between the engine block and cylinder head. These replacement cylinder head dowel kits include two dowels.
Not Yet Reviewed
$20.99
Fleece Performance 6.7 Cummins Stock VGT Turbo Coolant Delete Plugs
When replacing the stock VGT turbo on your 6.7L Cummins with a non-water-cooled turbo, these delete plugs from Fleece Performance are a must. They conveniently fit the stock coolant feed from the riser block and coolant return on the firewall. Kit includes: * Two 16mm Allen head port plugs * One 18mm Allen head port plug
Not Yet Reviewed
$29.95
Fleece Performance Donaldson Fuel Filters
Fleece Performance Donaldson fuel filters are direct replacements for Fleece kits and assemblies. They are available individually or in cases of 12. Reduce your ongoing maintenance cost with a lower cost Donaldson filter. Choose the ones designed for your diesel.
Not Yet Reviewed
$279.99
