Availability
Is it time for an overhaul? USA Standard Gear transfer case bearing kits provide the bearings and seals needed to refresh your transfer case. Perform your maintenance with transfer case bearing kits from USA Standard Gear.
( 24 )
$167.89
—
$269.89
Mopar Replacement offers a variety of transfer case components for specified model applications. Parts include drive chains, sprockets, bushings, shafts, retainers, oil filters, springs, seals, and more! Manufactured from high-quality materials, these genuine OE replacements are designed for the same fit and function as the originals.
( 3 )
$29.99
—
$600.99
Building on decades of experience using reverse engineering to remanufacture automotive motors, Cardone engineers have meticulously designed and tested their brand-new transfer case motors to match OE fit and performance. Each unit is load-tested to ensure the torque power specification meets industry standards. As direct-fit replacements, Cardone transfer case motors provide ease of installation and reliability you can count on. They're available in a variety of styles and configurations; order the model recommended for your vehicle. Additional details: * Designed to deliver the precise amount of power to the transmission for a smooth transition when changing from 2WD to 4WD * Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life
( 3 )
$156.99
—
$180.99
From the time your vehicle starts moving until it stops, the parts in the transfer case are in action and under stress. When time, use, and stresses overcome these parts, replace them with Crown Automotive transfer case components. These components are OE-quality and designed to directly replace the originals. Transfer cases are constantly on the go, and when put into 4WD, they are downright abused. Rebuild or refresh your vehicle's case as needed with Crown Automotive transfer case components.
( 32 )
$9.99
—
$184.99
Abuse and general wear and tear over time will take its toll on your hubs. Mile Marker hub service kits provide the correct parts for maintaining their locking hubs and getting your vehicle back on the trails. Most of these kits include new hardware, snap rings, and O-rings designed to bring new life to your hubs. Freshen up your hubs with Mile Marker hub service kits.
( 5 )
$28.99
Prevent front driveline issues on your lifted truck with the BDS transfer case indexing ring kits. At 6 in. of lift and above it is necessary to index the transfer case to allow the front driveline to reconnect and eliminate vibrations. BDS T-case index ring kits have optimal spline engagement and are dual-drilled to allow positioning for compatibility with a range of lift heights. Rounding out each kit is a billet aluminum driveshaft spacer and all the hardware needed to complete the installation. Key features: * Indexing rings eliminate front driveline vibrations * Proper clearance prevents cross-member interference * Heavy-duty steel construction for maximum strength * Designed with optimal spline engagement to prevent transmission to transfer case damage
( 1 )
$193.95
—
$267.95
If you're looking for transfer case components like range forks, Motive Gear has what you need. They use only the highest quality materials to manufacture their equipment and have been providing aftermarket parts for over 65 years. When it comes to using transfer case components you can depend on time and time again, Motive gear has you covered.
( 16 )
$19.99
BD Diesel 2 Low Unloc differential kits disable the vacuum-controlled automatic front hubs on 4WD trucks. This enables the transfer case to be shifted into low range for the rear wheels only.
( 1 )
$190.95
Help engage or disengage your vehicle's 4WD system with one of these Dorman transfer case shift linkages. The control levers are constructed of corrosion-resistant metal for long lasting durability and their bushings ensure smooth operation. Dorman gives you direct replacement for a proper fit every time.
( 4 )
$31.99
—
$34.99
Dorman transfer case motors are designed to meet or exceed OEM specifications for your electronically shifted transfer case. The transfer case motors are all-new units, not rebuilt or remanufactured, to ensure top quality and performance.
( 60 )
$162.95
—
$298.95
Cardone remanufactured transfer case motors are fully torque-tested to ensure strength for proper gear engagements. They're 100 percent computer-tested at three points in the remanufacturing process for guaranteed performance. Transfer case motor sensors are replaced with new, OE-quality sensors for superior performance and long product life. Motor magnets are recharged, and every motor is assembled with the precise amount of lubricant to ensure quiet operation and longevity. Order the Cardone remanufactured transfer case motor designed for your vehicle application.
( 7 )
$100.99
—
$206.99
Dorman transfer case control lever bushings attach the shift cable to the shift linkage, providing a reliable connection. Replacement of this part firms up a loose shifter to restore proper function. These bushings are easy to install, a direct fit component manufactured to strict engineering quality standards. Order the model designed for use on your specific vehicle.
( 2 )
$11.99
Timken transfer case bearings are manufactured with the highest quality steel to the highest quality standards. They're available in a wide range of designs and are custom-tailored to specific applications and operating conditions. The rugged design of these transfer case bearings provides you with proven performance.
Not Yet Reviewed
$24.99
—
$118.99
SKF Bearings transfer case bearings are available in a wide range of applications—each bearing is manufactured from high-quality steel for long-life and durability. For more than 100 years, world engineers, technicians and mechanics have turned to SKF products for the best possible solutions.
Not Yet Reviewed
$52.99
—
$97.99
Crown Automotive disconnect axle replacement components are available to ensure that your vehicle will disengage the front drive axle when you switch from 4WD to RWD or 2WD. If these parts should fail and you are stuck in the wrong drive, restore your front-wheel spin and reduce rolling resistance with quality components--axle shift collars, shift forks, hardware, and gaskets--from Crown for complete axle disconnect service.
( 3 )
$30.99
Standard Motor offers transfer case motors for a wide range of vehicles, including many Chevrolet, GMC, Cadillac, Chrysler, Dodge, and Ram models. These OE replacements are manufactured from factory materials and specs to ensure precision fit and optimum function. The new (never remanufactured) motors undergo 100 percent testing to verify both mechanical and electrical performance. Choose from oval or square 7-pin plug style transfer case motors.
( 1 )
$298.99
Lares transfer case motors are engineered to OE specifications to ensure proper fit and function. The transfer case motors are available in a variety of styles and configurations; order the model recommended for your vehicle.
Not Yet Reviewed
$173.99
—
$214.99
Clearance
Evolution Driveline transfer case shift motors restore the performance of your 4WD or AWD systems. These products are remanufactured to meet or exceed OEM specifications for quality, fit, and performance. They're sealed for corrosion and dust-resistance, as well as tested and inspected to ensure optimal operation in your vehicle. Transfer case shift motors are highly sensitive and susceptible to heat, vibration, water, and dust. If you can't engage or disengage your transfer case, Evolution Driveline transfer case shift motors may be what you need. Order the model recommended for your vehicle.
Not Yet Reviewed
$132.99
$66.50
Zumbrota remanufactured transfer cases are put through a proprietary cleaning method, and arrive looking like new. But before they ship, each unit goes through complete inspection, component replacement, and quality control process to assure dependable, reliable shift-ability. Zumbrota rebuilds units from New Process, Borg Warner, and other major manufacturers to fill fitments for foreign and domestic passenger cars, trucks, and SUVs. Benefits of Zumbrota remanufactured transfer cases include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All cases are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent replacement of seals, bearings, viscous couplers (when applicable), and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty
( 7 )
$1,133.89
—
$2,532.89
With their input shaft, output shaft, and many gears, it doesn't take a genius to realize that transfer cases need a lot of bearings. Use Crown Automotive transfer case bearings, whether your vehicle's case has a telltale whine, or you're completing a rebuild. They are designed and built to OEM quality for reliable service and a great fit.
Not Yet Reviewed
$44.99
Skyjacker transfer case indexing rings are designed to re-clock the transfer case in a better position. They will allow you to use your factory front driveshaft without making any modifications. A required transfer case seal adapter is sold separately.
Not Yet Reviewed
$297.50
—
$391.13
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
