Availability
Showing In Stock Items. Show All 13 Items.
On Sale
B&M Z-Gate automatic shifters operate just like those high-dollar, gate-type racing shifters, yet cost much less. Made for street and mild competition, the Z-Gate shifters have an NHRA/IHRA-accepted reverse lockout, a neutral safety switch, a backup light switch, and a universal plastic console. Their patented "Z" shaped architecture totally eliminates the possibility of overshifting and missing a gear.
( 41 )
$318.95
$239.95
On Sale
These great looking three and four-speed automatic floor shifters feature an 11 in. chrome plated solid steel stick with knob and stop bolts for positive shifting. They include the shifter boot with bezel, linkage, and mounting hardware.
( 41 )
$170.95
$128.95
On Sale
Auburn Gear Select-A-Loc differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! When locker switch is off, the clutch pack activates the limited-slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed, in turn providing bias torque to the highest traction wheel. When the locker switch is turned on, electronic current is sent to the electromagnetic coil which locks the axles together. Auburn Gear Select-A-Loc lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile or nasty off-road terrain, Auburn Gear Select-A-Loc differentials deliver superior traction capabilities on the street, at the track, or off-road.
( 10 )
$1,175.99
—
$1,801.99
$1,058.39
—
$1,621.79
On Sale
Built to exceed your expectations, Auburn Gear provides a variety of Grip-N-Loc differentials to match most makes and models. They build upon exclusive technologies previously found in their limited slip line—but with more robust construction and materials to satisfy the extreme demands of serious drivers. If you push the limits of performance and traction, perhaps through competition, or simply through extreme weather driving, Auburn Gear Grip-N-Loc differentials offer the best options to fit your application! More product features include: * Upgrades your vehicle for the safe transfer of increased power/torque across the axle * Case material is up to 50 percent stronger than OE cases * Advanced cone clutch technology provides a 25 percent increase in bias ratio/increased traction * Hardened-steel gear materials for confidence in extreme conditions * 2-year warranty
( 19 )
$514.99
—
$794.99
$463.49
—
$715.49
On Sale
Lakewood safety bellhousings are designed for maximum performance and durability. They are cut on CNC 5 axis laser cutters rather than plasma cutters to improve finish quality, reduce heat damage and warpage from the plasma cutter, improve speed of manufacture, and make them all exactly the same. All bellhousings feature a scalloped plate on the bottom of the transmission surface made from G70 grade steel (70,000) psi which will help eliminate stripping the transmission bolts. The engine plates are made of H60 grade material and the bells are roto-brated after welding to relive any stresses created from the hydro forming, annealing, or welding process prior to machining and painting. The roto-brating process also closes the metal on the outer surface making them stronger. Ever wonder how the SFI tests bellhousings like these Lakewood safety bellhousings? First, they bolt the bellhousing to a machine with a cast iron flywheel and saw inside it. Then they spin the flywheel, causing the saw to cut through it until it explodes. If the bellhousing can contain the explosion, the bellhousing is approved. These safety bellhousings are a safeguard to minimize the destructive effects of such an explosion. Don't take unnecessary chances with your safety and the safety of innocent bystanders--Lakewood not only provides top-notch products, they also provide peace of mind.
( 47 )
$1,299.95
$844.95
On Sale
These bolts are heat treated to Grade 8 specification and have a reduced profile hex head for clearance. Their black oxide finish resists rust and corrosion. Lock washers are included.
( 16 )
$30.71
$19.96
On Sale
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$142.95
$92.95
On Sale
Lakewood bellhousings are an excellent choice for street rods, street machines or oval track applications where the use of an SFI-approved bellhousing is not required. These units are made from 0.250 in. thick hydro-formed steel or lightweight cast aluminum. They're designed for use with hydraulic and mechanical fork throwout bearings--and utilize factory bolt patterns for easy installation. Order the model recommended for your transmission make and model.
( 37 )
$573.95
—
$1,349.95
$315.95
—
$742.95
On Sale
These QuickTime flexplates have been designed and engineered to fit your OEM transmission without any modifications. They are made from durable H70 grade steel and are double welded/TIG welded for durability. These QuickTime flexplates are also zinc plated for long lasting finish.
( 5 )
$486.95
$267.95
On Sale
Hays high-performance throwout bearings are designed to withstand the high spring pressure and high-rpm conditions common to racing clutches. They're heat-treated and Blanchard-ground to ensure trueness.
( 21 )
$110.95
$61.95
On Sale
Lakewood bellhousing bolts are for bellhousing to engine block and trans to bell attachment. These threaded hex head bolts are built from high-strength chromoly steel, and then black oxide coated for a tough, long-lasting finish.
( 3 )
$49.95
—
$52.95
$27.47
—
$29.12
On Sale
QuickTime bellhousings for Circle Track, strip, and street applications are built from high-grade steel. The cone is spun, not rolled or stamped, allowing these bellhousings to be the most dimensionally stable and accurate for today's high performance vehicles offering proven performance. Choose the size and specs needed for fitment on your particular vehicle, then bridge your transmission and engine with a QuickTime bellhousing.
( 106 )
$1,299.95
—
$1,449.95
$714.95
—
$797.95
On Sale
Hays Street/Strip clutch kits are engineered and built as matched assemblies, using only top-quality new parts, to deliver maximum reliability and durability, as well as long-term dependability. They're available in both diaphragm and Borg & Beck styles, with sprung-hub clutch discs that have organic linings. Applications are available to fit a variety of cars and trucks aimed at street or street-and-strip use. These kits come complete with a pressure plate, clutch disc, throwout bearing, and clutch-alignment tool (most kits). A pilot bushing is not included.
( 9 )
$699.95
$384.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
