Availability
Showing In Stock Items. Show All 139 Items.
NTK is the world's leading supplier of OEM oxygen sensors. They're individually tested to ensure the highest level of quality and reliability—designed to continuously detect the composition of exhaust gases. As the output from the sensors changes, the ECU instructs the fuel mixing system to alter the mixture. This ensures that the air/fuel mix is always correct and promotes efficiency. A new NTK oxygen sensor can help lower emissions, improve fuel mileage and engine efficiency, and extend catalyst life. These components meet or exceed OE specs and are equipped with waterproof, factory-fitted connectors to ensure a perfect fit every time. Order the model recommended for your vehicle.
( 80 )
$25.99
—
$49.99
Don't take chances with old, questionable, or faulty coolant temperature sending units that can give misleading information to you and your vehicle's computer. Standard Motor Products replacement coolant temperature senders are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These temperature sensors are available in many sizes and configurations to fit a wide range of cars spanning several decades. Trust your vehicle's electrical system needs to Standard Motor Products.
( 99 )
$29.99
Try Dorman engine oil pressure sensors for accurate engine oil pressure readings. These replacement sensors will help you to protect your vehicle from being driven at low oil pressure, to avoid costly engine repairs and help maintain performance.
( 10 )
$36.99
—
$40.99
On Sale
Summit Racing™ oxygen sensor extension harnesses are a must with full-length headers and other specific applications. These extension harness sets feature a direct plug-in design to eliminate the cutting and lengthening of oxygen sensor wires, along with high-temperature sleeving to help protect the wires from heat. They're available in a variety of plug styles, harness lengths, and other options. Order the pair recommended for your vehicle.
( 13 )
$61.99
$55.79
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 102 )
$26.99
—
$53.99
Save the environment and gasoline dollars. Tune-up with Bosch premium original equipment-type oxygen sensors for lower emissions and greater fuel economy. Properly functioning oxygen sensors are important when it comes to your vehicle's fuel economy and reducing harmful exhaust emissions. That's why checking for and replacing a worn-out oxygen sensor with one of these Bosch sensors is an important part of every routine tune-up. These O2 sensors feature an OEM connector for ease of installation. Bosch invented the automotive oxygen sensor and is the top choice of carmakers around the world. Order the model designed for fitment with your vehicle.
( 174 )
$39.79
—
$52.99
Mopar Replacement coolant temperature sensors are genuine OE replacements. That means your Chrysler, Dodge, Plymouth, Ram, or Jeep will receive the perfect part to repair and/or restore performance and safety, just as it should be. The sensors are made from high-quality materials to provide reliable, long service with the right fit, function, and value. Engine temperature is vital for optimum performance—and proper functioning Mopar coolant temperature sensors are essential to maintain efficiency. Order the model designed for your vehicle application.
( 1 )
$35.99
—
$49.99
Mopar Replacement camshaft position sensors are affordable, reliable, and built to last. They're also a smart choice to keep your Chrysler, Dodge, Plymouth, Ram, or Jeep running smooth and efficiently. These genuine OE replacements provide the proper function, as well as the right fit to make your install hassle-free. Order the model designed for your specific vehicle application.
( 3 )
$23.99
Dorman ABS speed sensors are designed to supply information regarding wheel speed to the ABS computer. One of the most common omissions in maintaining a modern anti-lock brake system (ABS) is checking out the speed sensors. They are often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again.
( 36 )
$22.99
—
$48.99
Mopar Replacement air temperature sensors are genuine OE replacements designed to monitor the temperature of the air entering the engine—so that the proper air/fuel mixture can be maintained. These sensors are engineered from high-quality materials to provide you with reliable, long service with the right fit, function for your vehicle application to repair and/or restore performance and safety, just as it should be. For genuine OE replacement parts for your Mopar, choose Mopar Replacement.
( 5 )
$33.99
—
$46.99
Standard Motor Products MAP sensors are direct, high-quality replacements for your vehicle's worn, damaged, or malfunctioning manifold absolute pressure sensor. These sensors accurately produce voltage or frequency as manifold pressure changes, and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. On engines with a speed density type of fuel injection, the MAP sensors also help the PCM estimate airflow. Malfunctioning MAP sensors can often cause problems such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and poor engine performance. Keep your vehicle in top operating condition with Standard Motor Products MAP sensors.
( 18 )
$21.99
—
$43.99
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$32.99
—
$51.99
MAP (Manifold Absolute Pressure) sensors which fail may cause the engine to have a too rich or lean fuel mixture condition. Crown Automotive MAP sensors restore data transmission to regulate timing control and fuel delivery. They convert engine vacuum/manifold pressure to an electrical signal so that the computer knows how much load the engine is under. This data is the basis for calculating values which keep your vehicle in top running order.
( 4 )
$20.99
—
$40.99
Crown Automotive crankshaft position sensors are used to control ignition timing and the fuel injector. They're crafted to compile information about the working condition and speed of the crankshaft, ensuring your engine cylinders are always performing as needed. This enables you to set ignition timing precisely to improve the performance of the engine cylinders. Crown crankshaft position sensors are available for fitment on a wide range of vehicles.
( 7 )
$22.99
—
$47.99
Casper Electronics oxygen sensor extension harnesses prevent cutting and safely extend your O2 sensor wires during relocation. They are available in several styles to suit your application.
( 56 )
$21.79
Worn-out sensors can cause engine performance problems and premature catalytic converter damage. Bosch premium universal type oxygen sensors with OE SmartLink produce precise output in proportion to the air/fuel ratio, due to a sophisticated sensing element. These premium sensors also use a patented connector system, which allows them to be added to an existing OE sensor harness. Keeping a properly functioning oxygen sensor in your vehicle saves money on fuel cost and is good for the environment, too!
( 13 )
$27.99
That glowing light on the dash that says "ABS" isn't a reminder that your vehicle has this safety feature--it's a reminder that it isn't functioning properly. Crown Automotive ABS speed sensors are designed to the same specifications as the OE units for easy fitment and reliability. Each wheel has at least one sensor that monitors speed and sends that information to the control module, where the correct pressure is sent to ensure quick stopping without skidding. The dash light comes on to inform you that at least one sensor isn't working, and the ABS is turned off. Get the correct parts for the right locations with Crown ABS speed sensors.
( 2 )
$20.99
—
$34.99
The camshaft position sensor monitors the rotating position of the camshaft relative to the crankshaft position. This data is sent to the vehicle's ECU, where it is used to adjust the spark timing and the operation of the fuel injectors. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts camshaft position sensor line has superior coverage for domestic and import applications.
( 2 )
$21.99
—
$33.99
Summit Bucks
Are you experiencing hard starts, stalling issues, rough idle, or hearing a slight pinging within your engine? Don't panic. It may be related to a bad throttle position sensor. Delphi throttle position sensors are designed to sense throttle movement and change of position. They also regulate various engine and vehicle operations, including spark timing, air and fuel ratio, torque converter lockup, air conditioning, and idle speeds. With that said, throttle position sensors are an important component, and if your existing sensor seems to have gone bad, just swap it out for a new one from Delphi.
( 13 )
$20.99
—
$49.99
Crown Automotive camshaft position sensors provide information vital to your engine's function. They offer a selection of reliable sensors to send off accurate data to your vehicle's ECM, for proper ignition timing and a smoother-running engine. Timing is important for efficient performance. Replace bad sensors with Crown camshaft position sensors.
( 2 )
$22.99
—
$44.99
Mopar Replacement water separator valve sensors offer high-quality, along with an original equipment fit and function to keep your favorite Chrysler, Dodge, or Jeep rolling down any road you choose to travel. When you need to replace and you want the proper fit, correct calibration, and reliable operation choose genuine Mopar Replacement parts. Order the model designed for your specific vehicle application.
( 1 )
$45.99
Standard Motor Products replacement throttle position sensors help you get maximum fuel efficiency and power from your engine. A properly operating accurate throttle position sensor is an essential component to helping your vehicle run flawlessly. The throttle position sensors transform the throttle position into output voltage and emit the voltage signal to your vehicle's computer. In addition, the sensors detect the opening and closing speed of the throttle valve and feed the voltage signal to the vehicle's computer. The computer receiving the signal from the throttle position sensor determines optimum engine operating conditions for idle control, fuel enrichment, and fuel cut. Replace your vehicle's worn or malfunctioning throttle position sensor with one of these reliable Standard Motor Products replacement TPS sensors.
( 36 )
$30.99
These Standard Motor Products replacement crankshaft position sensors are designed to send a signal to the ECM to determine engine rpm, crankshaft position, and engine misfire. They consist of a permanent magnet, yoke, and coil. The Standard Motor Products replacement crankshaft position sensors are mounted close to a tooth gear. As each tooth moves by the sensor, AC voltage pulses are inducted into the coil. Each tooth produces a pulse; as the gear rotates faster, there are more pulses produced. The ECM then determines the speed at which the component is revolving, based on the number of pulses. Therefore, the number of pulses in one second is the signal frequency. If you're experiencing crankshaft position sensor failure, try one of these Standard Motor Products replacement crankshaft position sensors.
( 26 )
$20.99
—
$38.99
JBA oxygen sensor extension harness sets feature a direct plug-in design to prevent the cutting and lengthening of your oxygen sensor wires. They are a must with full-length headers and other specific applications.
Not Yet Reviewed
$50.35
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
