Availability
When you're looking to replace leaking or worn-out engine seals, Fel-Pro head gasket sets have you covered. Ideal for your stock rebuilds or street-driven cars and trucks, Fel-Pro gaskets will have you back on the road in no time. They're available in hundreds of configurations for fitment on countless vehicles and engine types. Order the set designed for your car, truck, van, or SUV. (These gaskets are not intended for race applications.)
( 367 )
$52.99
—
$617.99
Moroso Perm-Align valve cover gaskets are manufactured from 30-durometer rubber, which is molded over and vulcanized to a rigid steel frame. They won't leak, blow out, or get sucked in, the way stock or inferior-quality aftermarket gaskets can. These gaskets feature superior-quality rubber and steel, which outlast cork-and-rubber composite designs to provide years of dependable service, especially if you frequently have to remove and reinstall the valve covers.
( 192 )
$56.99
—
$515.99
Mahle Original offers engine gasket sets for a variety of cars, trucks, and Jeeps. These full gasket sets include the many seals needed to rebuild your engine—all in one convenient package. The gaskets are made from a variety of materials, such as multi-layered steel or molded rubber, for use on various components. Order the Mahle Original engine gasket kit recommended for precise fitment on your vehicle application.
( 21 )
$74.99
—
$397.99
Fel-Pro engine gasket kits include the seals needed for a complete rebuild, all in one convenient and affordable package. Each kit features the premium-quality gaskets required for your specific engine—from head, intake, and exhaust gaskets … to valve cover, fuel and water pump gaskets, and many more. These sets are available for thousands of vehicle applications. Match your year/make/model to the Fel-Pro engine gasket kit designed for precise fitment.
( 526 )
$70.99
—
$404.99
The chain of command between a crankshaft, camshaft, and engine valves is central to your vehicle's basic movement—which is why it's so important to protect the timing belt. Fel-Pro timing cover gaskets provide a tight seal to keep contaminants out of the gear shaft area. They're offered in hundreds of single or multi-piece sets for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs; gaskets for industrial use are also available. Ideal for stock replacement (not intended for racing applications), Fel-Pro gaskets are made from materials such as fiber, cork, and rubber. Choose the kit which corresponds to your year/make and engine application.
( 539 )
$5.99
—
$84.99
Remflex exhaust header gasket sets feature 100 percent flexible graphite construction that's effective up to 3,000 degrees F, far exceeding any vehicle's exhaust system temperature. They will rebound 30 percent when tightened, creating an optimum seal that eliminates the need for re-torquing. The unique Remflex material has been proven for over three decades in industrial applications, where temperatures routinely exceed 2,000 degrees F. They're designed to crush up to 50 percent, filling uneven header flanges for maximum sealing and eliminating the potential for exhaust leaks. Choose the gasket style and dimensions for your specific exhaust headers.
( 834 )
$20.79
—
$46.39
Forged in the fires of high performance engines, Fel-Pro Performance head gaskets are quite literally created to tame the fiery combustion chambers of up to 1,000 hp engines. Reinforced with KEVLAR® fiber and engineered to give you a perfect seal that can withstand combustion pressures of 1,500 to 3,000 psi, these gaskets are bred for high performance. They have a conformable anti-stick coating—and are constructed with pre-flattened copper or steel rings for easy installation, while also giving them the strength to tame your beastly powerplant. The anti-stick coating ensures easy removal and cleanup on frequent rebuilds, but also aids in micro-sealing minor surface irregularities. When rebuilding your engine, use the parts you wish were in it to begin with. Put a set of Fel-Pro Performance head gaskets in that engine—not only to help it perform better today, but to make your next engine project that much easier.
( 630 )
$21.99
—
$110.99
If you have a vehicle that requires a valley pan gasket and your gasket kit didn't include it, Fel-Pro Performance valley pan gaskets are just what you need.
( 80 )
$35.99
—
$36.99
Fel-Pro Performance oil pan gaskets offer three types of construction. Some are made from Felcoid/Plus, a special fiber core with a latex rubber coating. For applications where a tougher seal is needed, they have solid steel core gaskets wrapped with rubber-coated fiber facing material. And for newer engines, there are one-piece molded silicone-rubber gaskets specifically designed to handle their special needs. Some of these gaskets have a solid steel core, while others have a rigid carrier-type design. Fel-Pro oil pan gaskets come with an anti-stick treatment for easy removal. Order the replacements recommended for your year/make and engine family.
( 407 )
$13.99
—
$81.99
Most Fel-Pro Performance intake manifold gaskets have Printoseal construction, which puts beads of special elastomers around the ports for extra sealing power. They also feature a non-metallic, rubber-fiber base material that resists gasoline and alcohol—and they allow engine builders to precision-trim around the intake ports. These replacement gaskets are available in a variety of materials, thicknesses, and port configurations. Order the set recommended for your vehicle year/make and engine application.
( 1284 )
$12.99
—
$38.99
Drip, drip, drip. Leaks can lead to the death of your transmission, it's just that simple. Ensure this never happens with LubeLocker transmission gaskets. Their unique construction features an aluminum core with an outer silicone coating, but the real magic is in the elastomer beading applied to the gasket face. This beading provides a dry, leak-free seal and requires no additional sealants like RTV to keep your transmission fluid where it belongs. LubeLocker offers a wide range of transmission pan gaskets that cover most popular hot rods, drag cars, rock climbers, off-road trucks, and street cruisers.
( 392 )
$32.95
Trick Flow® valley plate kits are just the ticket for racers and performance enthusiasts who need access to the lifter valley for valvetrain service—or who want to swap in a new cam without removing the cylinder heads. Made from 6061-T6 billet aluminum, the high-strength valley plates eliminate leaks and won't bend under extreme engine temperatures. Order the model recommended for your year/make and engine application.
( 14 )
$239.99
Fel-Pro's PermaDryPlus valve cover gaskets feature precision edge-molded silicone rubber, which resists high heat and delivers reliable sealing on irregular surfaces. This silicone rubber is wrapped around a rigid carrier that adds strength to the gasket to resist being sucked in under high vacuum or blown out when under pressure. At the same time, it also prevents over-tightening of the mounting bolts. Note, however, that these gaskets are not intended for race applications.
( 251 )
$17.99
—
$33.99
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 533 )
$87.95
—
$277.52
Cometic Gasket Street Pro top-end gasket kits bring race-proven MLS technology to the budget-minded hot rod guy or gal. The multi-layer steel gasket is their commitment to cutting-edge technology and producing superior-quality gaskets. Street Pro gasket kits are constructed from multiple layers of stainless steel for its strength, along with excellent rebound and corrosion-resistant characteristics. The outer layers are coated with a rubber-based material to create a superior, heat-resistant seal that can withstand extreme cylinder pressures. Cometic gaskets are ideal for everything from aluminum heads to cast iron or aluminum blocks. Street Pro gaskets offer top-end quality that you can afford.
( 6 )
$192.73
—
$466.85
Fel-Pro Performance main bearing seals are made of high-grade materials, such as silicone, polyacrylate, or fluoroelastomer. Race engine builders prefer these premium seals for their severe-duty needs.
( 189 )
$32.99
—
$46.99
Fel-Pro Performance valve cover gaskets are an excellent choice for engines, especially those that produce high horsepower. Fel-Pro performance valve cover gaskets are available in many materials for a variety of applications and needs. When your engine needs new gaskets, look no further than Fel-Pro performance gaskets for the best sealing power.
( 472 )
$29.99
—
$85.99
Fel-Pro PermaDry valve cover gaskets are recommended for stock replacement use. Their shape, thickness, and construction varies with each engine application. In addition to tried-and-true materials such as cork and rubber, advances in gasket technology have also been incorporated into molded silicone seals for leak-free performance. Simply match up your vehicle's make and model year with the Fel-Pro PermaDry valve cover gaskets designed for precise fitment. Note that these gaskets are not intended for race applications.
( 378 )
$15.99
—
$32.99
Edelbrock intake manifold gaskets offer precise sealing to make more power! Properly sealing an engine is vital to making maximum horsepower, and these intake gaskets will allow for optimum flow and performance. Edelbrock synthetic fiber composite gaskets are impervious to most chemicals, and when compressed, will conform to any imperfections on the sealing surface. Produce maximum power with the maximum sealing of Edelbrock intake manifold gaskets.
( 446 )
$29.95
—
$133.95
If you're rebuilding the top-end of your engine, you'll want one of these Mahle Original head gasket sets. They are perfect for stock rebuilds of engines for street-driven cars and trucks. Mahle Original head gasket sets are packaged in shrink-wrapped trays, giving you the ability to view the contents prior to opening the package. You receive every part you need to complete your gasket repair in one package (unless otherwise stated). Mahle Original utilizes OE equivalent or better materials in all their head sets, providing you with Mahle's Best Solution for your sealing needs. Mahle Original head gasket sets give you original equipment form, fit, and function, so they fit just like the originals. These gasket sets are not intended for race applications.
( 29 )
$52.99
—
$575.99
Milodon rugged crushproof premium oil pan gaskets can be used with gasoline, alcohol, and race fuels. They won't crush, split, shrink, or squeeze out like other gaskets. What's more, Milodon says you couldn't tear them, even if you tried.
( 129 )
$24.95
—
$47.95
Fel-Pro Performance gaskets are an ideal choice for the vast majority of racing and street performance engines. They're available in a broad array of bore sizes, thicknesses, and material options to meet any need for virtually every popular performance engine design. Whether you've got a professional racing engine or a Saturday evening cruiser—Fel-Pro Performance gaskets deliver reliable sealing of combustion pressure, coolant, and oil under the toughest conditions! Order the gaskets designed to fit your application. Product features: * High-density fiber facing material attached to both sides of a perforated steel core * Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets * Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service * Meets or exceeds all original equipment specifications * Application-specific design to ensure a perfect fit
( 493 )
$20.99
—
$49.99
Cometic valve cover gaskets are made from aramid fiber. This is a premium high-temperature, high-density, creep-resistant material that is fuel-resistant and asbestos-free. These gaskets require no retorquing or additional sealant. If you want a dependable seal, go with Cometic Gasket valve cover gaskets.
( 67 )
$16.45
—
$51.11
Mr. Gasket head gaskets are ideal for stock rebuilds and mild performance applications. They're designed to offer greater sealing characteristics than OEM, plus longer life--and they're more affordable, too!
( 45 )
$44.06
—
$44.08
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
