Availability
Showing In Stock Items. Show All 28 Items.
On Sale
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 36 )
$69.99
—
$136.99
$62.99
—
$123.29
On Sale
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 71 )
$2,366.99
—
$4,189.99
$2,166.99
—
$3,989.99
On Sale
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 43 )
$67.99
—
$133.99
$61.19
—
$120.59
On Sale
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 68 )
$36.99
—
$170.99
$33.29
—
$153.89
On Sale
Summit Racing™ forged crankshafts offer maximum strength and the best value for your dollar! Our crankshafts are non-twist forged from certified 4340 steel. They are put through several stages of heat-treatment, and then stress-relieved and shot-peened to provide the strength and reliability you demand for your high performance application. Each journal is micro-polished and a .125 in. radius is used for increased strength. Summit Racing™ forged crankshafts help you get the most in value and performance.
( 10 )
$1,019.99
$949.99
On Sale
Give your engine the winning edge with King XP-Series coated main bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote™ nano-composite coating takes protection to the next level without adding any additional thickness! Order the replacement main bearings designed for fitment with your engine. pMaxKote™ provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 7 )
$83.99
—
$212.99
$75.59
—
$191.69
On Sale
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$37.99
—
$161.99
$34.19
—
$145.79
On Sale
Summit Racing™ Pro Hemi Non-MDS swap camshafts are made from high-quality bearing steel cores. They are precision ground and finished on modern CNC grinders to provide you with a premium replacement cam. Choose the model that fits your engine and make sure to use with Non-MDS lifters.
( 1 )
$349.99
$299.99
On Sale
For high load applications, King SM-Series rod bearings contain the strongest aluminum-based material offered by King. The alloy is strengthened by the addition of manganese and chromium. King SM-Series connecting rod bearings feature a traditional steel-backing, plus an aluminum bonding layer and the aluminum bearing alloy. These replacement sets are available for a variety of vehicle applications.
( 1 )
$34.99
—
$137.99
$31.49
—
$124.19
On Sale
King AM-Series rod bearings are recommended for street or marine applications. They have superior embeddability, which provides greater macro-particle and reduces scratching of the crank journals and tearing or weakening of the Babbitt overlays. The direct replacements feature tolerance control up to +/- .0001—and they're lead-free, making them environmentally friendly and user-safe. Order the King AM-Series rod bearings in the application designed for proper fitment with your vehicle.
( 27 )
$13.99
—
$50.99
$12.59
—
$45.89
On Sale
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 92 )
$15.99
—
$47.99
$14.39
—
$43.19
On Sale
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 80 )
$14.99
—
$106.99
$13.49
—
$96.29
On Sale
Mopar's popular Gen III Hemi engines are ideal for swapping into muscle cars since they are durable, reliable, and make great power. The factory oil pans that come on these engines usually do not fit and hang too low for your swap. Holley Gen III Hemi retrofit oil pans' cast aluminum construction and integrated windage tray combined with the O-ring sealing provide an attractive leak-free solution for your engine swap. With the included pickup assembly and mounting bolts, Holley Gen III Hemi mid-sump engine swap oil pans have everything you need for installation.
( 7 )
$522.95
$339.95
On Sale
Need bearings? See the specialists at King. Their CA-Series rod bearings are a bi-metal silicon aluminum material offering high fatigue strength and a superior temperature threshold. When it comes to bearings, there is only one King Engine Bearings.
( 4 )
$9.99
—
$11.99
$8.99
—
$10.79
On Sale
VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.
( 40 )
$271.99
—
$444.99
$221.99
—
$394.99
On Sale
Why reuse your old dowel pins when you have machine work done on your block? I can't think of a good reason, especially when these Mr. Gasket dowel pins are inexpensive and readily available. They are made from high quality steel, precision machined and case hardened for accurate cylinder head alignment.
( 4 )
$17.19
$9.45
On Sale
King AM-Series main bearings are recommended for street or marine applications. These crankshaft bearings have superior embeddability, which provides greater macro-particle to reduce scratching of the crank journals and tearing or weakening of the Babbitt overlays. King AM-Series main bearings feature tolerance control to within plus or minus .0001—and they're lead-free, making them environmentally-friendly and user-safe. Hundreds of performance sets are available; order the replacement bearings designed to fit your vehicle.
( 34 )
$25.99
—
$79.99
$23.39
—
$71.99
On Sale
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 102 )
$3,949.95
—
$3,999.95
$2,172.95
—
$2,199.95
On Sale
Earl's Performance oil filter block-off plates are ideal for engine swaps where extra clearance is needed. The factory oil filter location on the Gen III Hemi may interfere with the crossmember or suspension in some engine swaps. Earl's Performance block-off plates and relocation kits allow the oil filter to be moved to a remote location. The block-off adapter screws on, instead of the oil filter, and two NPT ports on the block near the filter allow installation of the AN hoses for plumbing the remote filter. They are available in two thread sizes, both are made from aluminum with black anodized finished, and tagged with Earl's logo, making them attractive and corrosion resistant.
( 1 )
$29.43
$16.19
On Sale
Summit Racing™ Mockup Replica Blocks are light-weight and ship disassembled for ease of shipping and storage. The individual panels are easily assembled with tabs and slots for superior rigidity and accuracy compared to bolt-together types. Steel resists the heat from welding, so custom motor-mounts can be fabricated right on the block.
( 10 )
$399.99
$349.99
On Sale
Holley Sniper fabricated aluminum valve covers deliver high-end looks without the high-end price! They're constructed from 6061 T-5 sheet aluminum and precision TIG-welded for a proper fit. Plus, they feature thick one-piece CNC billet flanges for superior sealing. Sniper valve covers are available in your choice of natural or black powdercoat finishes, as well as with or without breather openings—and heights to clear most popular rocker arm combinations. Holley includes mounting hardware for quick and simple installation. Order a pair for fitment on your particular engine application.
( 87 )
$238.95
$131.95
On Sale
Looking for an easy way to advance or retard your cam? Look no further than these bushing sets from Mr. Gasket. Use the bushings to advance the cam for more low-end torque and mid-range horsepower, or reduce excessive low-end torque and increase top-end horsepower by retarding the cam. These sets include four offset bushings and one zero degree bushing to return your timing back to stock.
Not Yet Reviewed
$48.61
$26.74
On Sale
King XA-Series main bearings feature a strengthened copper-based material, with higher tin content for medium and high-load engines. Their tri-metal construction features a steel backing, an intermediate lead bronze layer, and a nickel barrier with Babbitt overlay. Today's performance engines require components that can withstand ever greater loads and stresses. King Bearings has the right set for your application.
Not Yet Reviewed
$17.99
$16.19
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
