Availability
Showing In Stock Items. Show All 14 Items.
If you're going racing and have a hi-po engine in your unibody car, you might end up losing traction or twisting the body. What you need is extra support, and Competition Engineering subframe connectors give you that. Constructed of mild steel tubing, these connectors include all hardware and instructions.
( 160 )
$257.99
Most stock chassis flex dramatically, even with mild amounts of torque and horsepower. BMR suspension strut tower braces reduce chassis flex and increase handling and performance. They are manufactured from a mix of large diameter DOM steel tubing and thick laser-cut steel plate. Depending on the application, they are available in two-point and four-point designs that solidly link the front strut towers, adding strength to the entire front unibody and suspension. Most are available in black hammertone and red powdercoat finishes for long-lasting good looks. BMR strut tower braces are 100 percent bolt-in. This means they can be easily installed with simple hand tools, and no welding is required. Installation time is typically less than an hour. When performance is a must, rely on BMR Suspension!
( 168 )
$259.95
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$219.95
—
$237.95
Silver Sport transmission crossmembers are CAD-designed from heavy-duty formed and powdercoated steel. They offer strength and accuracy, two essentials of a crossmember. These SST vehicle-specific crossmembers are stiff and resistant to deflection, meeting or surpassing the original design, meaning they won't flex during hard launches or on rough roads. They are engineered to provide the proper driveline angle eliminating installation issues seen with adjustable crossmembers, as well as vibration issues and possible U-joint damage. Exhaust and ground clearance are also taken into consideration. Silver Sport transmission crossmembers locate the transmission at not only the proper height and angle, but makes sure it stays there, regardless of power, torque, or road conditions. Order the one for your specific vehicle.
( 4 )
$199.95
If you're going racing and have a hi-po engine in your unibody car, you might end up losing traction or twisting the body. What you need is extra support, and Competition Engineering's weld-on subframe connectors give you that. Constructed of mild steel tubing, they solidly connect your car's front and rear subframes.
( 14 )
$168.99
—
$171.99
Custom laser-cut Hurst tunnel patches are used when installing an aftermarket transmission conversion into your classic car. These shifter tunnel floor panels are made from steel and pre-formed to fit your specific application.
( 10 )
$124.95
DC Sports front and rear upper strut tower bars work in conjunction with the factory suspension to strengthen the chassis by joining the two shock towers together. This helps to eliminate the flex created by performance driving, while improving the car's feel and handling. An easy-to-bolt-on design, which includes all necessary hardware and instructions, makes them a prime choice for your ride.
( 8 )
$142.49
Belltech crossmembers are designed to exceed OEM load specifications and are direct replacements for the factory units. A gain of 2.25 in. of clearance is achieved. Belltech low-profile design crossmembers reduce the risk of bottoming on extremely lowered trucks.
( 3 )
$259.00
Allstar Performance offset deluxe roll cage kits are ideal for use with template-style or ABC bodies. They can, of course, be purchased complete—or via individual components, such as main hoop assemblies, curved door bars, and door bar spacers. This component box kit is a perfect fit with either Allstar's 54 in. or 57 in. wide offset kit frames.
( 1 )
$199.99
Sherman offers a variety of rear floor pan shock absorber crossmembers for specific Mopar applications. These steel reinforcements are black powdercoated and bolt on easily to the classic Dodge and Plymouth models they're designed to fit.
Not Yet Reviewed
$190.99
Rust Buster frame repair sections help you replace those rusted or damaged frame rail areas on your truck or SUV. The EZ slip design allows the repair section to slide onto the frame and will include all the factory needed holes and mounting locations. Rust Buster uses the latest in CAD to model each repair section before it is laser-cut, formed and finish welded. Keep your ride on the road for years to come with Rust Buster frame repair sections.
( 29 )
$119.99
—
$179.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
