Availability
Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.
( 1525 )
$269.99
—
$279.99
Optima RedTop 6-volt batteries, featuring Spiralcell technology, are designed for all of your starting needs. Vibration and jarring, whether from off-road use or major potholes, can kill a traditional battery. The tightly wound construction in these batteries minimizes the plate movement and subsequent damage caused by harsh conditions, extending battery life. Optima RedTop batteries are leakproof, so they can be mounted anyplace inside a vehicle, in almost any position.
( 140 )
$269.99
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 355 )
$112.99
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 208 )
$126.99
—
$201.55
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 318 )
$111.99
—
$225.99
Edelbrock Elite II Series valve covers are the next generation of the original Elite Series valve covers. The Elite II Series feature a design that is influenced by the Elite Series originally released in 1985, but with a new modern take on this classic look. The valve covers are made from heavy-gauge, die-cast aluminum and are finished off with a show quality high luster polished finish. The raised fins are accented by a contrast gloss black finish between the fins for the definitive Elite Series look. Depending on application, Elite II valve covers are available in both stock and tall styles. Tall profile valve covers are 2 in. taller than stock and clear most roller rockers and valve train components, while the stock profile versions clear accessories like air-conditioning and alternator brackets.
( 182 )
$224.95
Today's engines operate under very demanding conditions. When these Sealed Power main bearing sets are used in performance applications, all components are pushed to their limits—and many must be changed to meet these special demands. Federal Mogul, a longtime supplier to both OEM and the aftermarket, has responded to this challenge with its tri-metal, copper-lead, high performance main bearing sets. They're tested in the lab and proven on the track. The bearings are available for various crankshaft undersizes, for direct replacement or performance usage on a wide range of specific applications.
( 97 )
$102.99
—
$169.99
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 118 )
$103.99
Gabriel HiJackers air shocks are the original air-adjustable shocks designed to provide customizable performance and support. They can be adjusted and readjusted to maintain proper ride height—and handle any of your temporary towing or hauling needs, including boats and campers. Hijackers feature chrome plated piston rod construction and deluxe wiper seals that provide optimum sealing. Dozens of models are available, covering thousands of applications.
( 610 )
$141.99
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 192 )
$126.99
These Proform high-flow mechanical aluminum water pumps feature a stamped steel impeller spinning on heavy-duty ball bearings. The result is up to 40 percent more coolant flow, giving you real performance value for your dollar. They are available in a natural or polished finish.
( 149 )
$100.95
Proform mechanical water pump housings can help eliminate up to 10 lbs. of automotive weight. These cast aluminum stock replacements are easy to install. They're available for fitment on numerous classic models from Chrysler, Dodge, and Plymouth.
( 8 )
$128.99
—
$153.95
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 552 )
$101.37
—
$235.73
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$176.99
—
$210.97
Ford Performance Parts high performance oil filters are designed and built for high performance use. They're available for a wide variety of applications. Features include: * Synthetic polymer/cellulose-fiber blend media * Heavy-gauge bases and canisters * Higher burst strength and fatigue resistance * High-quality silicone anti-drain back valves * Non-stick sealing gaskets * Long life with all motor oils * Up to 50 percent more filtering capacity than standard filters * Improved filtering efficiency
( 54 )
$234.99
Monroe Max Air shock absorbers are ideal for vehicles that haul heavy loads or tow trailers. They're designed to maintain vehicle height and can be inflated or deflated as needed, from 20 psi to 150 psi with the vehicle loaded. If you're hauling heavy, try Monroe Max Air shock absorbers to get the job done. These adjustable shocks are available for fitment on hundreds of specific vehicle applications. Features: * All-weather fluid that contains special modifiers to ensure smooth rod reaction * Full displaced valving on both the compression and rebound for a comfortable ride * Sintered iron piston that enhances durability for long service life * Lubricated air sleeve that reduces friction and provides smoother operation during suspension movement * Hardened and precision-ground 1/2 in. piston rod for consistent performance * Large-volume air chamber that will hold a maximum of 150 psi
( 287 )
$151.99
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$161.99
Cometic Gasket Street Pro top-end gasket kits bring race-proven MLS technology to the budget-minded hot rod guy or gal. The multi-layer steel gasket is their commitment to cutting-edge technology and producing superior-quality gaskets. Street Pro gasket kits are constructed from multiple layers of stainless steel for its strength, along with excellent rebound and corrosion-resistant characteristics. The outer layers are coated with a rubber-based material to create a superior, heat-resistant seal that can withstand extreme cylinder pressures. Cometic gaskets are ideal for everything from aluminum heads to cast iron or aluminum blocks. Street Pro gaskets offer top-end quality that you can afford.
( 7 )
$215.94
—
$278.31
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 252 )
$115.99
—
$123.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 69 )
$107.99
—
$161.99
Mahle Original offers engine gasket sets for a variety of cars, trucks, and Jeeps. These full gasket sets include the many seals needed to rebuild your engine—all in one convenient package. The gaskets are made from a variety of materials, such as multi-layered steel or molded rubber, for use on various components. Order the Mahle Original engine gasket kit recommended for precise fitment on your vehicle application.
( 24 )
$152.99
Proform Mopar licensed electronic distributors are vacuum advance models. Each of these blueprinted distributors is factory set with a high performance advance curve, and each is made entirely from new, not rebuilt, components. Order the model designed for your vehicle and engine application. Proform Mopar licensed electronic distributors feature: * Prominently displayed retro-style Mopar logo * Female socket-type cap and rotor * Magnetic pickup * Made from cast aluminum with natural finish * Electronic control box is required (not included)
( 24 )
$158.95
Mr. Gasket windage trays include molded rubber gaskets on the top and bottom for a one-piece design. The windage trays are made from glass-filled nylon and molded rubber. The gaskets don't need any RTV, so future service is easy—and the re-usable windage tray/gasket can be washed with soap and water. Product features: * Combination windage tray and oil pan gasket for big block Chrysler/Mopar * Fits 383, 400, 413, 426W, 440 and 426 Hemi * Choose from two sizes: up to 3.75 in. stroke, or up to 4.15 in. stroke * Eliminates the hassle of scraping off old gaskets * Eliminates the cost of replacing the two paper gaskets with metal windage trays * Gasket works best on oil pans with a smooth pan rail
Not Yet Reviewed
$120.95
Cloyes Race Billet True Roller timing sets provide race-ready performance! These sets feature sprockets machined from premium billet steel on state-of-the-art CNC equipment to ensure the highest quality and consistency. The sprockets are induction-hardened and oil-quenched by Cloyes' in-house, multi-stage heat treat process. Sets include a Cloyes Premium True Roller chain—which features full roller action and superior strength. Side plates are cut and shaved from high-strength steel and are heat-treated for maximum fatigue resistance. Their .250 in. rollers are cold-rolled and hardened to exacting standards, increasing load and rpm capabilities. Cloyes Race Billet True Roller Speed Sets are offered with a choice of 3-or 9-keyway crank sprockets, providing multiple valve timing settings. These sets are hand-matched to qualify center distance and runout, ensuring the best performance with every set!
( 99 )
$150.99
—
$167.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
