Availability
Callies Mopar engine blocks are Officially Licensed Mopar products. Together with Energy, Callies will manufactured and distribute cast iron engine blocks and components. All parts manufactured will carry authentic Mopar part numbers and be produced from original Mopar molds, cores, and engineering data. The Mopar blocks are being offered in different bore sizes in finished and RoughBore (RB) versions.
Not Yet Reviewed
$6,039.00
BluePrint Engines Pro Series Mopar 426 c.i.d. Base dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$24,299.00
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. The engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW OEM Hellcat engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Holley Terminator engine harness Fuel injection Throttle body Harmonic balancer Fabricated intake Manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Fuel Injected -- Spark Plug: NGK 97408/ LZTR6AP11EG -- Spark Plug Gap: .043 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Fabricated Aluminum Gen III HEMI -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$18,799.00
—
$18,899.00
TCI 6x 6-speed GM 4L80E automatic transmission packages are the first aftermarket 6-speed automatic transmissions capable of handling 850 hp. They give you six forward gears (2.97, 2.31, 1.57, 1.18, 1.00, and 0.75) for quicker acceleration and increased fuel economy at cruising speeds. The TCI 6x 6-speed GM 4L80E automatic transmission packages are versatile transmissions that fit Chevy small block, big block, and LS Series engines. They also feature a compact design, allowing them to work in a variety of vehicle applications, including pro touring, street, and race vehicles. The TCI 6x 6-speed GM 4L80E automatic transmission packages include a paddle shifter, wiring harness, dipstick, and transmission cooler. Choose the TCI transmission package that's recommended for your vehicle and engine application.
Not Yet Reviewed
$8,603.95
—
$10,290.95
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI base long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III HEMI Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- PS426CTF ALSO INCLUDES: Fuel injection Throttle body Harmonic balancer Fabricated intake manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Compression ratio: 10.48:1 Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel delivery type: Fuel injected -- Spark plug: NGK 97408/ LZTR6AP11EG -- Spark plug gap: .043 in. -- Harmonic balancer: Non-weighted -- Flexplate / Flywheel: Non-weighted -- Stall converter: 2500+ -- Intake manifold: Fabricated aluminum Gen III HEMI -- Fuel recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$13,799.00
—
$16,899.00
Carefully tuned by Trick Flow® engineers to deliver optimum horsepower and torque on a big block Mopar 440, these PowerPort top-end engine kits save you cash and take the guesswork out of designing a winning engine combo. Each kit is built around a set of dyno-proven PowerPort 240 cylinder heads and includes a Track Max® hydraulic roller camshaft, a Track Heat® intake manifold, 1.6 ratio roller rocker arms with shafts and hold-down bolts, MLS head gaskets, a cylinder head bolt kit, and an intake gasket set with valley pan.
Not Yet Reviewed
$5,379.90
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. These engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$26,799.00
—
$26,899.00
If you're looking for a supercharger your can customize to your needs, without including parts that you don't want, then Vortech kits are for you. Vortech's tuner centrifugal supercharger kits feature lightweight, investment-cast aluminum impellers that are heat-treated, CNC-machined, and high-speed balanced to ensure smooth operation. The gear cases and volutes are cast from premium A356 aluminum alloy, heat-treated, and then CNC-machined. Kits are available in both satin and polished finishes and come with a step-by-step, fully illustrated installation manual. Tuner kits do not include fuel and engine management hardware to allow for custom tuning. These kits do require custom (dyno) tuning by a specialist. Tuner kits are not smog legal. Most kits also include: * Matched supercharger * Heat-resistant silicone hose couplings * Premium-grade flex hose * Flow-tested cast aluminum and/or urethane air discharge tubing * Compressor bypass valve * OEM-style heat-treated cast 356 aluminum mounting brackets * Supercharger drive pulley * Integrated belt tensioner * Premium drive belt * Stainless steel clamps * Heavy-duty mounting hardware Some kits will include a high-flow air intake system, and a reusable air filter element.
( 1 )
$6,993.99
—
$8,129.99
Designed from a clean slate approach, Dart now offers the Iron Eagle Mopar Gen III cast iron bare blocks that address the shortcomings of the Hemi Gen III platform, and are the ideal candidate for hot rodders, drag racers, circle track competitors, off-roaders, and high performance marine enthusiasts. By utilizing conventional style main caps with Gen III rotating assemblies and related components, Dart has addressed the windage and oil control problems, along with revising the cooling and oiling passages for improved flow. Non-VVT and VVT version offerings are available. Get everything you ever wanted out of your Gen III Hemi engine with the Iron Eagle Mopar Gen III cast iron bare blocks by Dart! Key features of Dart Iron Eagle Gen III Hemi cast iron engine blocks: * Manufactured from superior strength cast iron * Priority main oiling system with two lifter crossovers and restrictor provisions * Siamese cylinder bores with extra thick walls * Extra-thick decks ensure reliable head gasket seal * Blind head bolt holes available in 7/16 in. standard or 1/2 in. upgrade * Scalloped water jackets increase flow around cylinders for better cooling * Clearance for 4.050 in. stroke with steel rods * Billet steel 4-bolt main caps 1-5, center 3 main caps splayed * Main studs standard * Gen III Hemi style motor mounts * Provisions for OE stock roller lifters and cam * Uses stock timing covers * All OE bolt holes for starter, water pump, etc. * Block can be machined for VVT or non-VVT camshafts * Parts kit included (32000050 for non-VVT, or 32000051 for VVT); note parts kits do not include cam bearings
Not Yet Reviewed
$5,499.99
BluePrint's Standard Edition Builder Series combos pair engine and transmission, eliminating guesswork and making it easier to gain the performance you desire. These combos match a carbureted Chrysler small block-compatible 408 c.i.d. engine with a 727 automatic transmission enabling the production of 465 hp and 494 lb.-ft. of torque with a compression ratio of 10:1. They are offered with a polished or black pulley kit. Select the one you like best. Block: * Hand-picked seasoned Magnum block * Square and parallel decked * Align honed main bearing bore * Cylinders honed within .0002 straightness and roundness * Cylinders are sonic tested for thickness * Mechanical fuel pump provision * 4.040 in. bore * 2-bolt main * 2-piece rear main seal Rotating assembly: * Cast crankshaft * Stroke: 4.000 in. * Forged Magnum 6.123 in. connecting rods with 150,000 psi bolts * Forged pistons * Externally balanced front and rear Cylinder heads: * BluePrint Engines assembled and machined Edelbrock casting * Aluminum Magnum-pattern cylinder heads--58cc chamber * Aluminum roller rockers * 2.02 in. intake/1.60 in. exhaust valves * 176cc intake/75cc exhaust runners Camshaft: * Roller * .544 in. intake/.541 in. exhaust valve lift * 236 intake/242 exhaust duration at .050 in. of lift * 110 degrees lobe separation angle (LSA) Ignition timing: * 34degrees total at 4,000 rpm 727 transmission: * 10 in. torque converter * 2,200 to 2,600 stall Also included: * Holley 750cfm classic carburetor * Distributor * Thermostat and thermostat housing * Fuel pump and fuel lines * Spark plugs and wires * Harmonic balancer * Valve covers * Timing cover * Air cleaner * Starter * Oil pan * Polished or black front accessory drive: -- Water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor
Not Yet Reviewed
$16,049.00
—
$16,149.00
Summit Bucks
Does your HEMI equipped Challenger, Charger, Magnum, 300, or RAM Truck need more power? Then equip your ride with an Edelbrock E-Force Chrysler Stage 1 street legal supercharger system—the most efficient supercharger on the market for the popular Chrysler 5.7L, 6.1L, and 6.4L HEMI engines. These complete supercharger systems provide maximum flow, minimum temperature rise, quiet operation and reliability only the Edelbrock name can guarantee. They feature minimum air restriction in and out of the supercharger for optimal flow; and they include individual 7 in. long intake runners that allow for maximum low-end torque and great drivability. These systems are also available in a Stage 3 Pro Tuner system based on the Stage 1 system, but paired down to the essential components for your custom race builds. Order the model recommended for your application. Optional supplemental warranties are available (Stage 1 only) to give you peace of mind when installing an Edelbrock supercharger system on your brand new vehicle.
( 4 )
$9,189.95
—
$10,556.95
Summit Bucks
Edelbrock E-Force universal supercharger systems are designed for engine swaps into street rods and muscle cars. They feature 12 in. long runners for maximum low-end torque and great drivability. They're capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than an Edelbrock E-Force universal supercharger system—exactly what you need for your engine swap project. Order the model recommended for your year/make and engine application. Edelbrock E-Force universal supercharger systems include the following components: * Supercharger manifold assembly * Cast aluminum tensioner/idler bracket * Cast aluminum engine valley tray * Heavy-duty automatic belt tensioner * Dual, high-capacity, bar and plate, intercoolers * High-flow 95mm mass airflow sensor housing * Extruded aluminum fuel rails with -6 AN lines * Custom-molded intercooler hoses with quick-connect fittings * Electric intercooler water pump * Intercooler recovery tank * Fuel injectors * Steel idler pulleys with heavy-duty, high-speed bearings * High-flow conical air filter * Edelbrock aluminum engine covers * Plug and play, electrical harness, installation hardware * 3.5 in. supercharger pulley
Not Yet Reviewed
$8,766.95
FAST Gen III Hemi Supercharger/Camshaft Power Packages provided the perfect paring of products for enthusiasts to gain a 1,000+ hp potential from their Dodge. These Power Packages feature Edelbrock's 2650 TVS supercharger with patented, dual-pass, 3-core integrated intercooler, and COMP Cams' LST camshaft designed for supercharger applications. FAST Gen III Hemi Power Packages have all the basics required to install the supercharger, but necessary accessory items such as fuel injectors, air intake, and heat exchanger pump are left up to the installer, providing total flexibility for custom installations. FAST Edelbrock/COMP Cams Power Packages include: * 2650 TVS supercharger--patented integrated intercooler with 45 percent more cooling area and the ability to generate major power gains through lower inlet air charge temperatures * Supercharger pulleys: -- 3.500 in. is pump gas-friendly supercharger pulley for engine break-in, initial tuning, and general performance driving -- 2.625 in. when maximum power is desired on race fuel or E85 * Accessory drive pulleys * Fuel lines and rails * Low Shock Technology camshaft * Phaser limiter * Pushrods * Conical valve springs * Chromoly steel retainers * Valve locks and seals * Spring seats and shims * Installation hardware
Not Yet Reviewed
$9,279.95
Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Their centrifugal supercharger kits feature lightweight aluminum impellers that are heat-treated and high-speed balanced to ensure smooth operation. An O-ring compressor housing seal and an innovative impeller seal improve sealing and reduce friction. Vortech has taken away the headaches of building a custom kit by engineering these kits to have a true OEM-quality fit and finish. Each kit is 100 percent complete, right down to the wire ties. Most kits include a matched compressor supercharger unit with SQ technology for "Super Quiet" operation. A high-flow air intake system with a reusable air filter, heat-resistant silicone hose couplings, and premium-grade flex hose is included as well. Additional features: * Flow-tested cast aluminum and/or urethane air discharge tubing * OEM-style, heat-treated cast 356 aluminum mounting brackets * Supercharger drive pulley * Integrated belt tensioner * Premium drive belt * Stainless steel clamps * Heavy-duty mounting hardware * Choice of satin or polished finish * Step-by-step, fully illustrated installation manual
( 9 )
$9,323.99
—
$9,749.99
Magnuson supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. This technology recalibrates the engine and transmission control programs to work with the altered induction path and boost pressure of the supercharger. And that produces a seamless and consistent delivery of power over the entire rpm range--not just the high end! For you, that means Magnuson superchargers will boost your power output, and yet run like their factory installed units. Whether you're driving a Corvette or a Cadillac, a Silverado or a Hummer, or a Camaro or a Mustang, Magnuson supercharger kits deliver maximum performance!
( 12 )
$7,595.00
Mopar Replacement offers rack and pinions for a wide range of vehicles. These OE-style parts are built with factory materials and specifications to ensure proper fit and performance with no modifications needed. Rack and pinion gear sets have two main functions: Conversion of the steering wheel's rotational motion into the linear motion needed for the vehicle's wheels to turn; and reduction of gears, which makes it easier for the steering wheel to turn the wheels. Whether you drive a Jeep, Dodge, Chrysler, or other Mopar ride, you'll find a dependable replacement to restore optimum steering function.
Not Yet Reviewed
$6,991.99
Summit Bucks
ProCharger P-1SC-1 supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. Their extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. These supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your application.
( 9 )
$7,699.00
—
$8,434.00
Mopar Performance A-4 aluminum midget race engine blocks are designed to take midget racing to an all-new level. They are manufactured from quality aluminum and include cast iron sleeves, billet steel or billet aluminum main caps, a main cap stud kit, and mounting hardware. The Mopar Performance A-4 aluminum midget race blocks feature an unfinished 4.130 in. bore and are available in 8.40 in. or 9.00 in. deck heights for your specific engine's needs. The engine blocks accept the W9 raised-port aluminum cylinder heads manufactured specifically for sprint or Midget racing. If you're building a midget racing engine, try one of these Mopar Performance A-4 aluminum midget race blocks for a bulletproof combination.
Not Yet Reviewed
$7,139.99
Mopar Replacement wiring harnesses offer the same durability, quality, and reliability of the original factory components. Order confidently knowing that these versatile Mopar wiring harnesses will provide the fit and performance in accordance with OE specifications. Select the harness designed to fit your application.
( 1 )
$5,276.99
Callies Ultra billet crankshafts are intended for use in cutting edge applications where durability and innovation are a must. They are machined from premium grade (Para-Pure) Timken alloy steel formulated to create a level of toughness that is unmatched in the crankshaft industry. Each Ultra billet crankshaft is uniquely machined with Callies' Ultra-Shed counterweight profiles. The Ultra-Shed leading edge profile gently moves oil away from the oncoming counterweight while the directional trailing edge directs oil away from the oncoming rod journal. Callies' Aero-Shed super finish will give you a crankshaft that is totally stress-riser free and incredibly aero efficient. When these processes are combined, the result is a crankshaft with the lowest coefficient of drag in the industry. Callies has developed a wide range of part numbers for a variety of popular engines. Choose the Ultra billet crankshaft created for your engine.
Not Yet Reviewed
$7,543.00
These nearly silent NOVI-1200 gear-driven supercharger kits come in models for V8-powered carbureted applications, or for today's sophisticated fuel injection. The kits have a cast-aluminum carburetor enclosure assembly that pressurizes the float bowls and throttle shafts for seamless response. The enclosure features a -8 AN fuel inlet port, plus locations for pressure/vacuum connections. Carburetor studs, linkage arms, a splined shaft, and right/left hand spherical rod ends are included for simple throttle connection and adjustment. They also include a 1/2 in. thick billet aluminum bracket, a cast aluminum discharge tube with a Bosch compressor bypass valve, and a fuel line fitting kit. Paxton's fuel-injected NOVI-1200 supercharger kits feature many of the same components as the carbureted kits, along with a number of EFI-specific parts, such as a handheld programmer, a molded inlet duct that retains the stock air box and MAF locations, an air/water charge cooler, and new cast aluminum discharge ducting. You also get a complete fuel system upgrade that includes replacement injectors, a fuel pump, lines, and a fuel management unit with a wire harness. All kits come with a supercharger oil feed and oil drain, required fasteners, and a detailed instruction manual for easy installation.
Not Yet Reviewed
$5,050.99
—
$5,636.99
These Vortech V-3 Si-Trim Chrysler/Dodge Hemi supercharger kits feature an internal lubrication reservoir that does not require a connection between the engine oil pan and the compressor gear case. The new V-3s include a remote fluid drain hose that allows for simple fluid changes without removing the supercharger from the vehicle. All Vortech V-3 Si-Trim Chrysler/Dodge Hemi supercharger kits feature Vortech's integrated dual-pass air/water charge cooler, high-flow bypass valve, billet aluminum mounting brackets, belts, pulleys, and reusable air filter element.
Not Yet Reviewed
$6,993.99
—
$8,779.99
Mopar Replacement 6.4L 388 c.i.d. Hemi long block crate engines are not remanufactured engines; these are brand new fully assembled V8 engines with brand new components. They feature a deep skirted cast iron block, aluminum heads, a cast crank. Add your choice of intake manifold, valve covers and other components to complete the perfect engine for your hot rod or truck. The engines are ideal for swapping into Mopar applications such as Jeep, Dodge, and Chrysler.
Not Yet Reviewed
$8,536.99
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 71 )
$5,263.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
