Availability
If you're looking to convert over to LED headlights in your classic car or truck, Summit Racing™ direct-fit LED Headlights bulbs will help you see the light. Available with options that include sealed or unsealed, round or rectangular, and single or dual-beam capabilities, you're sure to find what you're looking for. Add some modern capabilities to your favorite ride with the Summit Racing™ direct-fit LED headlights best suited for your application.
( 82 )
$79.99
—
$99.99
Sealed Power Performance piston rings are made from ductile iron, and compression rings are available with moly, chrome, and plasma-moly facings for extra durability. These OE-quality sets will seal mild- to high-compression engines and help protect against oil blowby. They feature standard ring end gaps for easy installation. Find the bore dimension and ring thicknesses needed for your application.
( 318 )
$50.99
—
$104.99
These Summit Racing™ remote oil filter kits include a bypass adapter, filter mount, 8 ft. of oil hose, barb fittings, stainless steel hose clamps, mounting hardware, and instructions. These kits require a Fram PH8A or equivalent oil filter, which is not included.
( 188 )
$60.99
—
$74.99
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 355 )
$89.99
Do you need a replacement fan clutch? These fan clutches by Hayden Automotive are manufactured to ensure performance and durability. Hayden offers thermal, non-thermal, and heavy-duty series fan clutches that meet strict factory guidelines. All Hayden Automotive fan clutches should only be used on the specific applications for which they are cataloged. Use of the wrong fan clutch may result in poor cooling, excess noise, reduced mileage, and/or fan clutch failure.
( 450 )
$53.99
—
$72.99
Flex-A-Lite belt-driven Flex fans feature an aggressive pitch blade design to move the most air at idle. Plus the Flex blades will flatten out at high engine rpm to reduce drag--improving horsepower and gas mileage. Specs for Flex-A-Lite Flex fans: * Stainless steel (6) blades with red stars * Stainless steel (5 or 6) blades with blue stars * Stainless steel blades with gold star (reverse rotation only) * Several diameters to choose from * Mounting pattern: 5/8 in. pilot, 1 3/4 in. to 2 1/2 in. bolt pattern * Projected width of 2 1/4 in.
( 51 )
$88.99
Fel-Pro engine gasket kits include the seals needed for a complete rebuild, all in one convenient and affordable package. Each kit features the premium-quality gaskets required for your specific engine—from head, intake, and exhaust gaskets … to valve cover, fuel and water pump gaskets, and many more. These sets are available for thousands of vehicle applications. Match your year/make/model to the Fel-Pro engine gasket kit designed for precise fitment.
( 549 )
$63.99
—
$76.99
Replace weak-type tie rod sleeves that are prone to failure under performance and racing use with new billet aluminum tie rod sleeves from Proforged. These billet aluminum tie rod sleeves can put the ultimate finishing touch on your front-end rebuild. Featuring machined-out solid 6061-T6 aluminum that's MIL-Spec black anodized, these heavy-duty tie rod sleeves are lightweight and look great. Best of all, Proforged thread-matches their tie rod sleeves to their mating tie rod ends to offer the perfect fit.
( 53 )
$79.95
—
$89.95
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 118 )
$50.99
—
$87.99
Summit Racing offers True Roller timing sets for a wide range of vehicles from the 1950s and up. These single- or double-roller sets have rugged true-roller chains, teamed with steel crank and cam sprockets. The crank sprockets feature multiple keyways, which allow you to set the cam timing to your choice of degrees in advanced, retarded, or normal. Order the timing set recommended for your year, make, and engine application.
( 178 )
$74.99
Vision American Muscle 55 Rally Series silver wheels are available in a variety of widths, bolt patterns, backspacing, offset, and center bore options. These 2-piece steel rims have a glossy silver finish and offer a vintage profile for a bit of throwback curb appeal. The 55 Rally Series will look great on vehicles from the 1950s and up through today's muscle machines.
( 357 )
$68.99
Trust Summit Racing™ to give you timing sets that will deliver accurate, reliable cam timing. Our billet steel true roller timing sets have rugged double-row, true-roller chains teamed up with billet steel crank and cam sprockets. The crank sprockets have multiple keyways, which allow you to modify your cam timing. Get reliable timing from Summit Racing™ billet steel timing sets.
( 120 )
$105.99
—
$109.99
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 552 )
$87.95
—
$101.37
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 317 )
$54.99
• Milodon’s exclusive high efficiency impeller design is installed into new GMB castings using heavy-duty bearings and large-diameter shafts. It is the impeller that makes the pump work so much better than a standard, stock design water pump. • Milodon water pumps are available in high-volume (steel or aluminum) and standard-volume versions Pumps are direct factory replacements with OEM hose connections and bosses. • These high-volume pumps have a balanced distribution design (equal flow to both sides of the engine block) and a high-efficiency impeller that increases coolant flow up to 30 percent over stock. • These features increase coolant pressure in the block to prevent hot spots and air pockets and improve coolant flow in the radiator. • A high-flow thermostat is recommended when using a high-volume pump.
( 220 )
$62.95
—
$103.95
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 39 )
$80.28
—
$112.40
Summit Racing brings you our ultimate ignition wire with our 8.5mm 50ohm wire sets. They are made with 100% high tear resistant silicone construction, a 50ohm per foot Wire-Wound FERRITE magnetic suppression core, stainless steel and brass terminals and extreme heat-resistant boots. Only the highest quality raw materials and Made in the USA workmanship, go into every set. The 100% High-Tear resistant silicone jacket protects the inner ferrite core from heat breakdown. The dual silicone layers are bonded together using a tightly woven fiberglass matting that virtually eliminates terminal pull off. Our 50-ohm ferrite core has over 3 FEET of nickel/copper mag winding per INCH! With this tightly wound core, you can be assured that your spark plugs are getting all the power your ignition system can provide. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used on all applications; for superior connection and consistent voltage delivery. High heat silicone and high dielectric strength polymers make up the extreme composition of the spark plug boots. Our boots provide superior radiant heat resistance for longevity and high dielectric strength properties to prevent voltage leakage. With all of these features built into our Race-proven 8.5mm 50-ohm sets, you can be assured that installing one of these sets on your engine will give you all the performance and durability you have come to expect from Summit Racing products.
( 197 )
$86.99
—
$91.99
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 118 )
$74.99
—
$93.99
Switching out your steering wheel to a different bolt pattern has never been easier than with Summit Racing™ steering wheel adapters. These adapters are manufactured from aluminum and feature a styling finish. There's no need to worry about proper fitment--steering wheel adapters are available in various patterns, making them applicable for any of your desires.
( 37 )
$54.99
—
$60.99
Simple, traditional, and steel--that's Vision HD 85 Soft 8 Series black wheels. These 2-piece steel wheels have the strength that you need to roll through the wilderness and back onto the pavement in classic style. With higher load ratings available, these wheels are available in 15 in. and 16 in. diameters to keep you moving anywhere you travel. These extremely popular black gloss painted wheels sport a familiar 8-window design that's timeless and rugged. And, even better, our wheel prices are hard to beat! Traditional style, the strength of steel, and great value make Vision Wheel 85 Soft 8 Series wheels simply the best choice.
( 156 )
$65.99
Oil volume is nothing to take lightly, so why reuse an old oil pump or settle for something less than great, when you can have a Sealed Power pump? They've been making quality, reliable performance pumps for decades. These high-volume oil pumps have increased rotor or gear section lengths for increased oil delivery to critical areas under extreme conditions. Their sturdy cast-iron pump body handles the stress associated with high rpm and added oil volume. The extra volume is helpful in maintaining oil pressure in rebuilds.
( 58 )
$98.99
PerTronix's Flame-Thrower 7mm "Stock Look" spark plug wire sets are designed to give you the ultimate in high performance, while retaining a stock appearance. The core consists of a carbon-impregnated fiberglass center that is spiral-wound with stainless steel alloy. They also feature: * Low 500 ohm per foot resistance * Silicone jackets to resist high temperatures, moisture, oil, and chemicals * EPDM rubber inner insulation for superior heat resistance and the prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility
( 141 )
$73.20
—
$79.55
Ironman RB-12 NWS tires represent the perfect alliance of new and old—by combining all the benefits of contemporary tire technology with a classic white sidewall styling. To achieve a quieter, more comfortable ride, the RB-12 NWS is constructed with a modern, all-season compound that enhances wet traction and durability. The white wall design is based on the popular RB-12, and it also delivers the same outstanding affordability and durability that's a staple of the original RB-12. Give your ride a classic touch with modern performance: Ironman RB-12 NWS tires, available in a variety of sizes for passenger cars, SUVs, and crossovers. Features including: * Lateral shoulder slots improve water dispersion and promote heat dissipation * Square tread profile maximizes contact area and improves handling stability * M+S rating ensures all-season performance and peace of mind * Computer-optimized tread design reduces road noise for a quieter, more comfortable ride
( 34 )
$90.00
—
$97.00
Melling Automotive Products manufactures a complete line of heavy-duty oil pump intermediate driveshafts. These shafts are made of stress- and fatigue-proof steel for maximum strength and durability. They're available for thousands of vehicle and engine family applications.
( 177 )
$60.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
