Availability
Showing In Stock Items. Show All 14 Items.
Painless Performance 21-circuit Mopar color-coded universal wiring harnesses can be used in almost any application where you want Mopar color-coded wires. They eliminate the troublesome bulkhead connector and use a unique covered micro-fuse block. Also featured is an auxiliary circuit with a 20 amp relay for accessories such as fog lights or an electric fuel pump. Each wire is custom printed with the circuit identification for easy installation. Includes circuits for: * Air conditioning/heat * Accessory (relayed) * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Third brake light * Turn signals * Wipers
( 27 )
$599.99
On Sale
MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.
( 327 )
$620.95
XS Power Titan8 lithium batteries are designed for peak power. This Lithium Titanate Oxide (LTO) Series uses a very high-power lithium cell that is designed for very high-burst output (up to 100 times its capacity) as well as very high-charge current (30 to 60 times its capacity). This translates to a single 10Ah module that can support burst current up to 1,000 amps and can accept 300 amps of continuous charge current. The built in 2/0 bussing allows up to four positive and four negative hidden direct connections to each module without the need for any external exposed bussing, while still leaving two easily accessible top terminals and four series or parallel expansion terminals to easily build a bank of nearly any configuration from 12 V, 24 V, 36 V, or any configuration imaginable. Each module comes standard with a built-in balancing system and can be upgraded to include Bluetooth connectivity that allows remote cell monitoring, internal temperature sensing, battery health monitoring, and can be configured to send notifications to any tablet or smartphone when any user preset limit is met, including low voltage, over temperature, overcharge, etc. XS Power Titan8 lithium batteries are also offered in BCI direct fit models that are fully insulated with temperature monitoring built in that are suitable for use in the factory under hood position.
( 3 )
$599.99
—
$699.99
Summit Racing™ battery Pro Packs combo an Optima RedTop battery, Painless battery cable kit, and a tray/hold-down kit for a complete install in your vehicle. The high performance AGM RedTop is Optima's ultimate starting battery designed to deliver a strong burst of ignition power for a reliable start-up every time. The batteries offer longer life, more vibration resistance, no maintenance, and are virtually spill proof and mountable in most any position. Painless Performance battery cable kits include a red 1-gauge positive and a black 1-gauge negative cable with lightweight abrasion-resistant insulation capable of handling over 250 amps and heavy-duty terminals already installed, side post adapters, and high-amp crimp ring terminals. Their 16 ft. length make them ideal for trunk-mounted batteries and custom installs. The battery tray/hold-downs are made from premium aluminum and chosen to match the battery in the Summit Racing™ Pro Pack selected.
Not Yet Reviewed
$530.97
On Sale
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 36 )
$579.95
—
$599.95
On Sale
MSD flying magnet crank triggers use four magnets permanently embedded in an aluminum wheel. As the crank rotates, the magnets pass a non-magnetic pickup, which triggers the ignition. These MSD systems include a trigger wheel, pickup, CNC-machined aluminum mounting bracket, and hardware.
( 51 )
$649.95
On Sale
Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation
( 2 )
$549.95
On Sale
These Mallory Unilite distributors give you accurate, maintenance-free ignition timing. Instead of old-fashioned points systems, they have photo-optic, LED-triggering systems that never vary or wear out. You get increased rpm potential, improved combustion, longer spark plug life, and better cold-weather starting. Hooking one up is a simple 3-wire connection, and they come with your choice of adjustable mechanical and/or vacuum advance, self-lubricating bushings, and a Super-Duty cap and rotor.
( 55 )
$599.95
On Sale
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$759.58
These FAST dual-sync billet distributors are an easy, drop-in, plug-and-play solution for fully sequential high performance V8 electronic fuel injection engine applications. They feature reluctors and pickups that have been properly aligned right out of the box, so you don't have to set crankshaft reference angles or phasing in the rotor prior to installation. The FAST dual-sync billet distributors have housings that are CNC-machined from high-quality 6061-T6 billet aluminum and include adjustable slip collars to ensure perfect cam gear alignment. Using high-output magnetic pickups to generate high-capacity, noise-resistant, discrete switching signals for the FAST XFI ECU, they offer extremely precise ignition timing and long life. Deliver strong, powerful energy to your spark plug wires with one of these FAST dual-sync billet distributors.
( 28 )
$545.95
FAST XDi Race Cam Sync distributors are an easy solution for those looking to provide an accurate cam sync signal to their aftermarket fuel injection system. Designed for applications that typically use a crank trigger, these distributors enable proper functioning of sequential fuel injection, individual cylinder spark timing, and fuel injector phasing—a must for maximum power and efficiency. Testing has shown the Hall-effect style optical pickup maintains a steady plus/minus 1/2 degree trigger signal, unlike competitors' inductive-style pickups prone to signal drift at high rpm. Ideal for drag racing, high-end street, and marine applications, FAST XDi Race Cam Sync distributors are constructed with a billet housing, precision-ground stainless shaft, and premium bearings. Hand-assembled parts also maintain consistent shaft end play, eliminating another source of triggering fluctuation. Each distributor comes with a precision-machined bronze gear and must be used with a crank trigger and external ignition box. These units are available for a variety of small and big block engine applications.
Not Yet Reviewed
$577.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
