Availability
Showing In Stock Items. Show All 31 Items.
Summit Bucks
Forged in the fires of high performance engines, Fel-Pro Performance head gaskets are quite literally created to tame the fiery combustion chambers of up to 1,000 hp engines. Reinforced with KEVLAR® fiber and engineered to give you a perfect seal that can withstand combustion pressures of 1,500 to 3,000 psi, these gaskets are bred for high performance. They have a conformable anti-stick coating—and are constructed with pre-flattened copper or steel rings for easy installation, while also giving them the strength to tame your beastly powerplant. The anti-stick coating ensures easy removal and cleanup on frequent rebuilds, but also aids in micro-sealing minor surface irregularities. When rebuilding your engine, use the parts you wish were in it to begin with. Put a set of Fel-Pro Performance head gaskets in that engine—not only to help it perform better today, but to make your next engine project that much easier.
( 636 )
$52.99
—
$89.99
Summit Bucks
Fel-Pro engine gasket kits include the seals needed for a complete rebuild, all in one convenient and affordable package. Each kit features the premium-quality gaskets required for your specific engine—from head, intake, and exhaust gaskets … to valve cover, fuel and water pump gaskets, and many more. These sets are available for thousands of vehicle applications. Match your year/make/model to the Fel-Pro engine gasket kit designed for precise fitment.
( 545 )
$71.99
—
$101.99
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 546 )
$87.95
—
$101.37
Moroso Perm-Align valve cover gaskets are manufactured from 30-durometer rubber, which is molded over and vulcanized to a rigid steel frame. They won't leak, blow out, or get sucked in, the way stock or inferior-quality aftermarket gaskets can. These gaskets feature superior-quality rubber and steel, which outlast cork-and-rubber composite designs to provide years of dependable service, especially if you frequently have to remove and reinstall the valve covers.
( 199 )
$60.99
Cometic Street Pro bottom-end gasket sets gather all of the necessary parts in one handy kit, tailored to specific years/makes/models. Rebuilding or servicing an engine can be quite an ordeal--trying to locate all of the correct gaskets, seals, washers, and O-rings for the many sections. If the fit isn't perfect, you know the messy results.There's no need for you to hunt down replacement seals for oil pans, water pumps, pickup tubes, cranks, drains, timing covers, retainers... you get the picture. Match up your vehicle with the corresponding Cometic Street Pro bottom-end gasket set and order today!
( 2 )
$74.53
—
$81.99
Do you have a leaky transmission pan gasket? You need to replace it with one of these premium transmission pan gaskets from Mr. Gasket. They're precision-made from materials that feature excellent compressibility and greater thickness recovery for a positive seal. Your garage floor will thank you!
( 31 )
$56.89
The airflow experts at Trick Flow® teamed with Cometic to create these multi-layer steel head gaskets for high performance street, drag racing, and Circle Track applications. They're ideal for high-horsepower naturally aspirated and boosted engines, providing increased torque retention, less distortion, and better sealing than conventional or composite head gaskets. These head gaskets are available in dozens of configurations and size options for engine applications spanning more than a half-century.
( 30 )
$95.99
On Sale
Mr. Gasket Ultra-Seal exhaust gaskets are designed and constructed to improve the sealing of exhaust header flanges. Unlike standard exhaust gasket material, Ultra-Seal gaskets incorporate a graphite-impregnated facing and a steel-expanded metal core that reinforces and increases their tensile strength. This allows the gaskets to conform to warped flanges, giving them better sealing capabilities without deteriorating or cracking under the excessive heat and pressure that's common in exhaust systems. Ultra-Seal gaskets are available for a wide range of port styles and sizes. Additional features and benefits: * Expanded steel core provides stability and maximum torque retention to eliminate gasket failure * Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head * High-recovery material allows header or manifold flange to stay sealed if flange loses clamp-load * Can be trimmed for modified port applications * Designed for OE replacement, high performance street, drag race, road racing, and oval track use
( 173 )
$55.65
These Summit Racing™ exhaust gaskets are made from thick copper, and feature an embossed ridge around the exhaust port for a tight, leakproof seal. The copper gaskets help even out the flow between the head and header flange to minimize warping. Also, they'll conform to rough or irregular surfaces to maintain a positive seal, while keeping the header bolts tight.
( 208 )
$52.99
Edelbrock cylinder head gaskets provide the best sealing solution for your engine. Edelbrock relies on industry-leading manufacturers to ensure their head gaskets will provide optimum fit and sealing properties when used with Edelbrock cylinder heads. These replacement gaskets are machined from high-density materials to precise specs--for applications from the 1940s and up.
( 57 )
$65.95
We have put together these Summit Racing™ exhaust gasket and bolts Pro Packs to ensure a leakproof seal for your headers. They feature Fel-Pro Performance exhaust header gaskets made from high-temperature, high-density fiber material around a perforated steel core for durability and heat resistance. To provide a tight seal, we include Stage 8's Grade 8 locking header bolts. They use a patented system that consists of a grooved hex head bolt, a retainer, and a snap clip. The retainer fits over the bolt head and locks the bolt against the header tube, and the snap clip holds the retainer in place. Use one of these Summit Racing™ exhaust gasket and bolts Pro Packs to eliminate blown header gaskets from loose bolts.
( 7 )
$101.94
—
$103.94
Summit Bucks
When you're looking to replace leaking or worn-out engine seals, Fel-Pro head gasket sets have you covered. Ideal for your stock rebuilds or street-driven cars and trucks, Fel-Pro gaskets will have you back on the road in no time. They're available in hundreds of configurations for fitment on countless vehicles and engine types. Order the set designed for your car, truck, van, or SUV. (These gaskets are not intended for race applications.)
( 371 )
$95.99
—
$97.99
Leaks in the exhaust manifold produce bad exhaust valves, a loss of power, and increased fuel consumption. Mahle Original exhaust gaskets require metal beads where the gas passes through at very high temperatures and low pressure. These metal beads are reinforced with metal sheets to resist the component movement that arises from large fluctuations in temperature.
( 14 )
$65.99
Summit Bucks
Fel-Pro understands that there are many combinations of parts and port sizes in high-performance engines. So their Fel-Pro Performance R.A.C.E. (Remainder to Assemble Complete Engine) gasket sets allow you to purchase the correct specialized gaskets for your particular application separately, while still getting all the commonly used gaskets to complete your rebuild. These sets typically include gaskets and seals for the water pump, timing cover, fuel pump, thermostat housing, oil pump, and rear main seal. Order the replacements recommended for your year/make and engine application.
( 39 )
$50.99
SCE MLS Spartan head gaskets are strong, simple to use, and ready for battle. These multi-layer stainless steel (MLS) gaskets feature fluid sealant coating applied to all inner and outer gasket plates. This proprietary method provides a continuous, unbroken coating that seals up to 60RA surface finishes on block and heads, and a superior cold seal. Choose the model designed for your vehicle. SCE Spartan head gaskets, with their advanced manufacturing, delivers trouble-free, bolt-on performance without extra sealants.
( 3 )
$105.93
Summit Bucks
Premium Fel-Pro Blue Stripe valve cover gaskets are available in a variety of materials, thicknesses, and configurations. The extra-thick seals yield better compressibility for tough applications. Order the replacements recommended for your vehicle year/make and engine family.
( 200 )
$50.99
Not all solid copper gaskets are created equal. SCE uses premium 99 percent pure copper sheets that are precisely rolled to our specifications and tested for uniform flatness to assure precise cylinder head-to-block alignment and eliminate uneven loading. After processing, each gasket is annealed to ensure optimum mating and provide measurable gains in cylinder sealing, as evidenced by lower leak-down percentages. O-ringing is recommended. Pro Copper gaskets are available in many bore and thickness combinations to suit your performance needs.
( 19 )
$75.97
—
$94.60
If you're rebuilding the top-end of your engine, you'll want one of these Mahle Original head gasket sets. They are perfect for stock rebuilds of engines for street-driven cars and trucks. Mahle Original head gasket sets are packaged in shrink-wrapped trays, giving you the ability to view the contents prior to opening the package. You receive every part you need to complete your gasket repair in one package (unless otherwise stated). Mahle Original utilizes OE equivalent or better materials in all their head sets, providing you with Mahle's Best Solution for your sealing needs. Mahle Original head gasket sets give you original equipment form, fit, and function, so they fit just like the originals. These gasket sets are not intended for race applications.
( 29 )
$95.99
—
$96.99
Flatout Gaskets makes a broad line of quality intake gaskets from premium materials so that they can handle the stresses of high performance applications. Don't take chances with inferior gaskets on your next performance buildup. Trust Flatout gaskets to seal up right the first time.
( 27 )
$57.99
Fatout Armored RCC (rubber coated copper) header gaskets features a rubber coating that is inert to almost all fluids and solvents and can withstand the extreme temperatures produced by the hottest drag motors. The dry coating is very thin to ensure low torque loss and is durable enough to be reused in most cases.
( 13 )
$61.99
Need a great seal? Flatout Gaskets Saberseal MLS head gaskets offer you a better sealing solution for high performance. These multi-layer stainless steel layered head gaskets deliver more sealing, less bore distortion, and the best torque retention than conventional or composition head gaskets. These gaskets feature thin, Viton® coated stainless steel layers and selective embossing techniques that create a leak-free seal. There is a better fit for your heads--Saberseal MLS head gaskets from Flatout Gaskets.
( 1 )
$92.99
Mahle Original offers engine gasket sets for a variety of cars, trucks, and Jeeps. These full gasket sets include the many seals needed to rebuild your engine—all in one convenient package. The gaskets are made from a variety of materials, such as multi-layered steel or molded rubber, for use on various components. Order the Mahle Original engine gasket kit recommended for precise fitment on your vehicle application.
( 22 )
$91.99
With their built-in oil and coolant seals, patented SCE Titan copper self-sealing head gaskets require no additional sealants. That means you get user-friendly installation, combined with reliable fluid sealing, plus the unbeatable strength of solid copper gaskets. The fluid seals are bonded to both sides of the gaskets and cleverly offset to allow the annealed copper of the gaskets to deform around them for a better seal, especially in the O-ring combustion-seal area. Recommended for liquid-cooled racing engines with O-rings in the heads or block, these one-of-a-kind copper head gaskets can even be used on street machines with no worries about coolant leaks! For perfect sealing strength every time, introduce your engine to SCE Titan copper head gaskets.
( 6 )
$97.38
—
$107.50
SCE's AccuSeal E Series is their common sense gasket line for engine builders, racers, or weekend warriors who want a better seal at a reasonable price. These timing cover gaskets are designed to stand up to high temperatures and pressures and deliver a precise fit. Plus, they're available for many specific auto make and engine applications. Your budget doesn't need to take a hit every time you buy gaskets; SCE AccuSeal E timing cover gaskets offer economy and performance for you and your wallet.
( 23 )
$56.98
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
