Availability
Showing In Stock Items. Show All 29 Items.
• Milodon’s exclusive high efficiency impeller design is installed into new GMB castings using heavy-duty bearings and large-diameter shafts. It is the impeller that makes the pump work so much better than a standard, stock design water pump. • Milodon water pumps are available in high-volume (steel or aluminum) and standard-volume versions Pumps are direct factory replacements with OEM hose connections and bosses. • These high-volume pumps have a balanced distribution design (equal flow to both sides of the engine block) and a high-efficiency impeller that increases coolant flow up to 30 percent over stock. • These features increase coolant pressure in the block to prevent hot spots and air pockets and improve coolant flow in the radiator. • A high-flow thermostat is recommended when using a high-volume pump.
( 214 )
$60.95
—
$99.95
Milodon oil pump driveshafts are CNC-machined from 4130 chromoly and are centerless-ground to avoid stress risers. These race-proven shafts eclipse breakage-prone stock units that frequently fail when used with high-volume oil systems, heavy racing oil, or high-rpm applications. The ends are induction heat-treated to reduce wear.
( 41 )
$202.95
—
$218.95
Milodon Street and Strip oil pans are designed for performance street as well as drag strip applications. They will fit most stock chassis and steering, as well as most headers. These well-engineered oil pans feature internal baffling that can free up additional horsepower. They're available in deep-sump and low-profile designs and are a necessity where high-volume oil pumps and increased rpm ranges are used.
( 252 )
$429.95
—
$479.95
Milodon windage tray stud kits are required to mount a windage tray assembly correctly. The adjustable mounting feature allows you to position the tray as closely as possible to the rotating assembly (minimum 1/10 in.), so the tray can work at its maximum potential. You can also adjust your tray to avoid interference with the oil pan (special torquing requirements apply, and the tray must lie naturally flat after positioning nuts are torqued). These fasteners are available individually or in larger quantities, and are designed for fitment on a wide range of make/model engine applications.
( 39 )
$77.95
—
$81.95
Ideal for street and strip applications, Milodon windage trays are specially contoured for a good fit. They permit rapid oil return and protection from oil splash-back, while providing increased power. They are available in either a solid design with louvers or a high-tech screen design.
( 94 )
$79.95
Milodon offers these valve cover stud kits for both universal and vehicle-specific applications. They're available in a variety of thread sizes, lengths, and quantities. The steel studs come with hex nuts for easy installation.
( 23 )
$21.95
Milodon rugged crushproof premium oil pan gaskets can be used with gasoline, alcohol, and race fuels. They won't crush, split, shrink, or squeeze out like other gaskets. What's more, Milodon says you couldn't tear them, even if you tried.
( 129 )
$31.95
Milodon oil pump pickups are engineered for maximum flow and long-term durability, even in the most extreme applications. They use precision-bent, thick-walled tubing with a larger-than-stock inside diameter—which is heliarc-welded to Milodon's own high-flow, compact-design pickup head. All oil pump pickups receive either a gold iridited or black powdercoat finish for ultimate durability against corrosion. Over a hundred models are available; order the pickup recommended for your year/make and engine application, oil pan style and depth, and other options.
( 229 )
$55.95
—
$81.95
Milodon oil pan stud kits are undoubtedly the best choice for attaching your Milodon oil pan. They include heat-treated studs with rolled threads and special nuts with built-in serrated washer faces. These kits provide easy pan installation and prolonged gasket life, and their special serrated nuts guard against pan loosening during operation.
( 30 )
$43.95
Milodon freeze plugs will not rot out, like lower cost steel ones. Your new engine assembly deserves the best. Don't get stuck trying to replace a leaking steel freeze plug behind a motor mount a year or two from now. Milodon freeze plug kits include all of the necessary external block freeze plugs, and cam and oil galley plugs for one complete engine.
( 47 )
$42.95
Milodon aftermarket main bearing caps not only strengthen factory 2-bolt blocks, but they will also add a measurable degree of strength to 4-bolt blocks. They are made from precision-machined, high-strength steel, which has the proper balance of strength and flexibility to allow for the transfer of increased shock loads to the crank and bearings. The secret is in the side bolts. They are angled so that they pull from the side walls of the block and not from the flimsy main web area. They'll also load the cap against the register step, which will prevent dreaded "cap walk." They can be installed by anyone with a hand drill and a tap and they come with the necessary bolts, washers, and drill bushing to complete the installation. Milodon main cap kits are available in your choice of angled or straight bolts.
( 20 )
$385.95
Overcome space limitations and change your filters with ease. Milodon oil filter adapters make oil filter changes quick and easy. They're made from high-quality materials to ensure durability.
( 10 )
$69.95
Before starting a new engine, proper priming of the oil system is absolutely critical. Milodon oil pump primers eliminate needless engine wear from improper lubrication upon initial start-up. They allow you to drive the oil pump with a 3/8 in. drill once the distributor is removed and are made from black oxide chromoly.
( 12 )
$26.95
Milodon timing-gear drive assemblies are designed for all-out competition, but work equally well in any application. Their proven fixed idler gear system is capable of maintaining consistent cam timing without siphoning off power the way 4-gear types can. Timing changes are easy via Milodon's adjustable bolt pattern cam gears and hub assemblies. Made for strength and durability, these gear drives will last indefinitely. They are available in a flat-cover style, which uses a stock-type water pump, or an injected/blown style, which doesn't use a stock-type pump.
( 15 )
$524.95
Milodon Street stainless valves are one-piece forged valves that are the perfect replacements for use in your street, Circle Track, or bracket racing engine. The intake valves are forged from quality HNV8 stainless steel, while the exhaust valves are forged from premium 21-4N material to withstand the extra heat and stress. The valves have hard-chromed stems and machined heads. They are designed to take a beating, with large seat margins which allows more than one regrind.
( 19 )
$26.95
—
$180.95
Milodon main stud kits are required where maximum gasket loading and minimal wear and tear are exerted on the block threads. These engine studs are premium-grade, race-quality studs that are created from aircraft-quality 8740 chromoly steel right in Milodon's own plant. They are ground and thread-rolled after heat treatment to ensure the exacting tolerances that Milodon requires for all of their fasteners. This ensures strength and consistent torque readings. The tensile strength of these premium fasteners is 190,000 psi, which is more than adequate for the most demanding applications. All kits come complete with 4130 heat-treated, parallel-ground washers and high-strength nuts.
( 20 )
$85.95
—
$134.95
Milodon offers nearly 20 types of timing gear drive replacement parts for specific year/make and engine applications. Direct-fit components include cam covers, gears, and hubs; crank gears; bushings, bearings, seals, and hardware; main housings; idler axles, gears, and retainers; mounting plates and more. Order the replacement parts recommended for your timing gear drive.
( 9 )
$23.95
—
$67.95
Milodon's water necks are manufactured from extra-thick castings and machined for an O-ring seal to give you leakproof performance without a gasket! Milodon chrome water necks are highly polished and chrome plated to look good every time you raise the hood.
( 2 )
$23.95
Milodon lifter valley baffles prevent hot oil from splashing on the intake manifold, thus eliminating power loss. They keep surplus oil out of valve covers by eliminating oil splash from lifter bores, and maintain oil pressure (during pushrod or rocker arm failure) by keeping lifters in their bores, except with roller cams.
( 10 )
$47.95
Milodon premium roller timing chains are equal to and, in most aspects, exceed OEM-quality specifications. They feature a double-wide non-split roller design to allow for easier chain movement, yielding increased performance and longevity. These timing chains come in application-specific designs to ensure an exceptional fit, superior strength, and quality performance for your ride.
( 8 )
$108.95
Milodon head studs are required where maximum gasket loading and minimal wear and tear are exerted on the block threads. They are premium-grade and race-quality, created from aircraft-quality 8740 chromoly steel right in Milodon's own plant. These studs are ground and thread-rolled after heat treatment to ensure the exacting tolerances that Milodon requires for all of their fasteners. This ensures strength and consistent torque readings. The tensile strength of these premium fasteners is 190,000 psi, which is more than adequate for the most demanding applications. All kits come complete with 4130 heat-treated, parallel-ground washers and high-strength nuts. These studs are available for dozens of specific cylinder head style applications.
( 11 )
$160.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
