Availability
Clearance
These Sealed Power MA Series main bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank whose surface hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better control of wall variance. It also helps to minimize debris embedding, which can score the crank's surface.
( 76 )
$117.99
$99.50
Clearance
Eagle competition rotating assemblies consist of name-brand quality components for a wide range of engines at an affordable price. Depending upon your selection, these kits may feature a crankshaft, pistons, piston rings, rod and main bearings, or connecting rods. Balanced assemblies are also available. Order the model designed for fitment on your year/make vehicle and engine application.
( 33 )
$2,829.99
$1,837.50
Clearance
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for the highest quality remanufactured parts. Through "reverse-engineering" failed parts, their engineers see where, and why, they failed. They reengineer their remanufactured products, where applicable, to reinforce failure-prone areas for longer-lasting performance. Cardone remanufactured parts cost up to 50 percent less than new--especially true with late-model, high-tech products. Cardone restores used auto parts back to their original fit and function, using only about 20 percent of the energy and raw material needed to build a new part; so you not only save money, but you also help save our planet. Features of Cardone remanufactured distributors include: * All electronic module components are 100 percent computer-tested to ensure full functionality * Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size, as well as ignition coil and pickup performance * Cardone uses the right gear hardness for the appropriate application: if the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage (many offshore manufacturers use only one gear hardness) * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * Precise machining tolerances prevent oil leakage, poor timing, the setting of the "Check Engine" light, and premature failure
( 100 )
$190.99
$102.50
Clearance
Lares takes care to clean their remanufactured power steering pumps thoroughly, and all exterior surfaces are reconditioned for a like-new appearance. Each component is inspected and replaced if it's not up to OE tolerances. All units receive new OE-equivalent seals and O-rings; and the pumps are then tested to ensure proper performance. Over a thousand models are available; order the power steering pump recommended for your vehicle.
( 18 )
$94.99
$66.50
Clearance
UREMCO remanufactured carburetors are expertly built from core to finished product. Purchasing a reman carb can sometimes be iffy ... unless you choose wisely. United Remanufacturing Co. has over 60 years of experience in carburetor rebuilding. As fuel system rebuilders with expertise and stringent standards, they ensure you the best quality at the best price. They rebuild carburetors from most all automobile and truck manufacturers, and each one is individually inspected and rigorously tested on flow-bench engine simulators by seasoned and knowledgeable employees. All UREMCO carburetors come equipped with new needle and seats, base gaskets, gas filters, and accelerator pumps. The extensive process from disassembly, cleaning, and testing to final assembly restores these carburetors back to their original form, fit, and function. When you purchase a UREMCO remanufactured carburetor, you're buying quality, value, and, most importantly, peace of mind. Order the replacement model designed for your vehicle and engine application.
( 810 )
$470.99
$219.50
Clearance
Don't trust your engine investment to just any no-name rocker manufacturer. Harland Sharp heavy-duty roller rockers are specifically designed for the heavy spring pressure and high-lift geometry of highly modified engines. They're also engineered with wider bodies, resulting in increased rocker strength and longevity. So, when your engine requires extra durability, use Harland Sharp heavy-duty roller rockers.
( 58 )
$95.99
—
$1,289.99
$66.50
—
$974.50
Clearance
Yukon Gear & Axle offers a full line of differential covers to suit your front or rear applications. These replacement covers protect your gears, keep lubricating fluid where it's needed—and on some styles, they offer added cooling and/or strength. Their large selection affords you options of materials, sizes, and finishes to get exactly what you need. Order the model recommended for your axle, differential case design, and engine specifications.
( 66 )
$108.99
$71.50
Clearance
Improper clutch location can be dangerous and uncomfortable. Make it right with ATP flywheels shims. Constructed of steel, they offer the adjustment that you need after having your flywheel resurfaced. These shims are available in a variety of thicknesses and bolt configurations for easy crankshaft to flywheel attachment. Get proper spacing and engagement with ATP flywheel shims; order the model recommended for your vehicle and engine application.
( 2 )
$18.99
$9.50
Clearance
Dorman Premium Chassis tie rod ends deliver quality engineering, manufacturing, and performance—at a fraction of the original equipment cost. Their Premium and Premium XL chassis parts cover a comprehensive list of applications and go beyond the quality of OE components to provide extended service life on your vehicle. Replacement tie rod ends may look alike, but they differ in the way they're manufactured and the materials that are used. Dorman Premium Chassis tie rod ends are built to supply you with parts that are stronger, more durable, and more efficient. Order the model recommended for fitment on your specific vehicle.
( 18 )
$20.99
$6.50
Summit Bucks
Clearance
ACDelco Gold semi-metallic brake pads are formulated with steel strands to provide strength, and to conduct heat away from the rotor's surface, while offering premium braking power. These high-quality replacements are ideal for many vehicles on the road today. Noise-dampening shims are included (where applicable), and no curing is required. Brakes are one area in which you simply cannot compromise. ACDelco Gold semi-metallic brake pads deliver the fit and performance you expect, along with peace of mind. Order the set recommended for your vehicle.
( 10 )
$39.99
$27.50
Clearance
Cloyes is a worldwide leader in the manufacture and supply of automotive timing drive systems and components for aftermarket. Their timing crankshaft sprockets are precision-machined from various quality materials, depending on the application. You can rest assured that Cloyes timing crankshaft sprockets will fit properly.
( 1 )
$27.99
$25.50
Clearance
Melling replacement hydraulic lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit. They are affordable and available as flat or roller lifters.
( 38 )
$23.99
$11.50
Clearance
The Right Stuff offers you the best-fitting, most exact reproduction fuel lines on the market. They utilize state-of-the-art CNC benders and automated end-forming machines that double-flare lines with remarkable consistency. The Right Stuff front to rear fuel lines are available in OEM steel or stainless steel, as well as various diameters and configurations for direct-fit replacement on hundreds of vehicles.
( 160 )
$127.99
$64.50
Clearance
Is it time for a tuneup? Replace your distributor's worn-out breaker points with new ones from Standard Motor Products. Why take chances with old, questionable, or faulty ignition components that can leave you stranded? Standard Motor replacement breaker points are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These inexpensive units are available for use in a wide variety of makes and models. Trust your vehicle's ignition system needs to Standard Motor Performance.
( 20 )
$16.99
$12.50
Clearance
Fatout Armored RCC (rubber coated copper) header gaskets features a rubber coating that is inert to almost all fluids and solvents and can withstand the extreme temperatures produced by the hottest drag motors. The dry coating is very thin to ensure low torque loss and is durable enough to be reused in most cases.
( 13 )
$61.99
$41.50
Clearance
Bishko factory OEM part lists and illustrations contain many diagrams to illustrate every single part in your automobile. When you cannot figure out the name of that little part you broke these diagrams can be invaluable for classic vehicle restorers! The chassis section includes comprehensive part information about the engine, electrical system, exhaust, transmission, brakes, suspension and more. The body section covers all body panels, doors, all window glass, and body moldings. Bishko factory OEM part lists and illustrations can help you put your project back together and get it on the road.
( 6 )
$49.99
—
$93.99
$31.50
—
$64.50
Clearance
New valve springs with larger diameters require new retainers to handle the higher pressures developed by the springs. Pioneer valve spring retainers are the solution. Precision-machined from high-quality steel and finished in black oxide, Pioneer valve spring retainers are specifically designed for positive location.
Not Yet Reviewed
$127.99
$52.50
Clearance
KB Performance Hyper piston and ring kits are offered for a wide range of applications from street and towing to marine and race. The kits feature pistons cast from 390 hypereutectic alloy heat-treated to T-6 standards to make them stronger. The pistons also feature fully machined crowns and valve pockets. KB hypereutectic pistons come in several head designs, as well as standard and oversized bore sizes. All KB Hyper pistons are lightweight to improve throttle response and rpm changes, while still being strong enough to withstand high compression and high temperatures. KB Performance Hyper kits (KT) are completed with piston ring sets containing top rings of moly-coated cast iron (M) or ductile iron (D).
( 72 )
$570.99
$425.50
Clearance
SKF Bearings pinion bearing races are precision ground for smooth, quiet operation. They are heat-treated for extended service life and their design allows for a wide contact area resulting in maximum load distribution. For quality you can count on choose SKF pinion bearing races.
Not Yet Reviewed
$21.99
$14.50
Clearance
These Scat crankshafts are made from the same strong aircraft-quality forging as standard-weight cranks, but have pendulum-cut counterweights to reduce rotating mass and oil windage. Scat Superlight crankshafts are perfect for engines wanting quicker rpm. These crankshafts feature profiled pendulum aero-cut counterweights and have straight shot and chamfered oil holes. Scat crankshafts are nitride-hardened, with large radii on all journals for superior wear resistance, and use lightening holes in all rod throws. Scat cranks are CNC-machined for absolute tolerances and symmetry, offering ease of balance and a reduced rotating weight.
( 1 )
$3,196.99
$1,778.50
Clearance
Mopar Replacement harmonic balancers are direct-fit replacements manufactured from quality materials, just like the originals, to fit just like the originals. Choosing genuine Mopar parts delivers the confidence that you have the right part, with the right fit, and the right performance to restore and/or repair your Chrysler, Dodge, or Jeep properly and safely.
Not Yet Reviewed
$462.99
$236.50
Clearance
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 135 )
$216.99
$170.50
Clearance
Centric C-Tek standard brake rotors offer premium features—like double-disc ground, non-directional finishes with machined non-friction surfaces, and G3000 metallurgy. These rotors are available for a wide selection of domestic and import vehicles. Exceptional quality paired with great value; you'll get more for your money when you equip your car or truck with Centric C-Tek standard brake rotors.
( 53 )
$101.99
$62.50
Clearance
Centric C-Tek standard bearings are offered in a full range of automotive and light truck applications. They offer superior value and performance, with both roller and taper-style models. Order the size recommended for your specific vehicle.
( 3 )
$8.99
$5.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
