Availability
Showing In Stock Items. Show All 41 Items.
Summit Racing™ billet electronic Mopar distributors convert your old points ignition to a new modern electronic breaker-less system. Available as standalone units or in a complete kit, these distributors offer these benefits: improved timing and dwell control; higher energy at the spark plug for easier starting; improved throttle response; extended RPM range; and better efficiency, along with increased spark plug life. The distributor bodies are CNC-machined from forged 6061-T6 aircraft-grade aluminum and come with a glass fiber reinforced (PBT) tan cap (which is patterned after the OEM dual point cap)—with extra internal voltage dams that help to prevent crossfire while resisting carbon tracking. The shafts are centerless ground and ride on both upper and lower sealed roller bearings for smooth operation at high RPM's and extended service life. The cap contacts and rotor blade are brass and the rotor spring is stainless steel, all for long-term maximum conductivity. Kits include the orange 6,500 rpm ignition control module, an advance curve kit, wire harness, ballast resistor, performance oil-filled ignition coil, and installation hardware kit. Order the model recommended for your vehicle.
( 59 )
$194.99
—
$239.99
Professional Products Chrysler Powerfire ignition coil packs are designed to give your ignition system a shot in the arm. They produce substantially more voltage than the stock coil packs and provide a longer spark duration. This assures that all of the intake charge will be combusted to wring out the maximum amount of power and torque from each engine revolution.
( 31 )
$216.99
Proform's Street/Strip HEI distributors have a variety of improvements over stock HEI distributors, such as a 50,000 V coil, a premium hi-dielectric cap with brass terminals, both upper and lower bushings for added durability, a low-saturation ignition module, and no voltage-reducing ballast resistors. These units offer calibrated advance curves that are optimized for maximum combustion efficiency, and the elimination of detonation damage and throttle ping. The distributors offer longer-term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. The Ford models' internal coil and module make it possible for Blue Oval owners to avoid the unsightly wiring of stock Ford electronic ignitions. By eliminating the stock Ford or AMC ballast resistor, you'll get more ignition voltage, resulting in an improved spark. Another advantage to switching to HEI is access to easily-found HEI replacement parts. The Ford units are also assembled with upper and lower bushings, an upgrade from stock distributors that only have a single bushing. They're easy to install by connecting one 12 V hot wire to the distributor, making them a quick performance upgrade.
( 164 )
$242.99
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 619 )
$249.95
These Proform electronic distributors are blueprinted and feature a factory-set performance advance curve. They include an adjustable vacuum advance unit and a premium distributor cap and rotor with brass contacts for maximum conductivity. Available for different engines, the Proform electronic distributors will keep your engine running consistently throughout the entire rpm range.
( 97 )
$113.99
—
$137.99
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 207 )
$148.99
—
$201.55
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 998 )
$128.90
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$199.82
Proform Mopar Licensed electronic distributor conversion kits are complete high performance packages that will convert your old point-type ignition to a new electronic ignition. Proform kits are made entirely from new, not rebuilt components. Order the model designed for your vehicle make and engine application. Kits include: * Prominently displayed retro-style Mopar logo * Magnetic pickup-type distributor with mechanical and vacuum advance * Electronic control unit box, wiring harness, and ballast resistor * Black female socket-type distributor cap * Detailed installation instructions
( 43 )
$180.95
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 799 )
$282.75
$114.95
—
$212.95
Proform Mopar licensed electronic distributors are vacuum advance models. Each of these blueprinted distributors is factory set with a high performance advance curve, and each is made entirely from new, not rebuilt, components. Order the model designed for your vehicle and engine application. Proform Mopar licensed electronic distributors feature: * Prominently displayed retro-style Mopar logo * Female socket-type cap and rotor * Magnetic pickup * Made from cast aluminum with natural finish * Electronic control box is required (not included)
( 24 )
$158.95
These PerTronix Ignitor III® replacement Flame-Thrower distributor modules are direct bolt-in replacements for your PerTronix Flame-Thrower distributor. They install easily and require no cutting or modifications. Maintain excellent spark and smooth rpm operation with one of these PerTronix Ignitor III® replacement Flame-Thrower distributor modules.
( 14 )
$214.80
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$183.50
—
$246.10
How would you like to keep your engine running consistently throughout the entire rpm range? It's easier than you think when you swap out your old points distributor—for the hot spark and accurate timing of a Summit Racing™ Mopar electronic distributor. Equipped with a vacuum advance and performance advance curve, these distributors deliver rock-solid timing across the entire rpm range for outstanding performance. They come in a cast aluminum housing with a machined finish—and are available individually or in a kit. Order the model recommended for your vehicle. When it comes to high performance, Summit Racing™ delivers!
( 2 )
$140.99
—
$190.99
Davis Unified Ignition SOS ignition coil packs feature advanced technology to pack more electrifying voltage into them for pure ignition performance. The SOS (Sultans of Spark) ignition coils are designed with increased windings to boost spark output up to 40,000 V! That is a 60 percent increase in spark energy over the 25,000 V produced by the stock ignition coils. The higher voltage, along with an increased spark duration, allows spark plug gaps to be opened up. The larger gap exposes a hotter spark in the combustion chamber for an increased burn of the fuel mixture, resulting in more horsepower and better fuel economy. Davis Unified Ignition SOS ignition coil packs also provide quicker starting, smoother idle, and excellent throttle response. They are direct replacements for the factory coil packs and do not require any special modifications for installation.
( 84 )
$179.00
MSD sport compact coils are direct bolt-in replacements that intensify the spark output of your ignition, helping your air/fuel intake charge burn more completely. The results are smooth idle and improved mid-range power. Installation is a snap--the coils connect right to your factory wiring.
( 38 )
$125.95
Cardone new distributors offer OE fit and form, built better! Cardone has seen where and why parts fail, so their new distributors are built with technology and design—plus, they're 100 percent computer-tested for guaranteed, long-lasting performance. Cardone also knows that a part has to look good, so their distributors are appearance-inspected for complete satisfaction. New distributors include the cap and rotor to make your installation a snap. For quality and reliability backed by nearly a half-century of experience, order the Cardone new distributor designed for fitment on your vehicle.
( 200 )
$101.99
—
$262.99
NGK ignition coils are designed to precisely control the spark intensity, delivering optimum power and the quality you expect from NGK. These replacement coils are designed to exceed OEM specifications for accurate, maintenance-free operation. They're easily installed and provide longevity and durability of your spark energy. NGK offers ignition coils as individual replacements or in a Multi-Pak for convenience and to maintain a proper service procedure.
( 57 )
$209.99
Holley Hemi V8 ignition coil adapter harnesses let you take charge of your engine by controlling both fuel and spark. They are built to fit and function with the factory harness. The harnesses feature TXL-grade copper wiring with minimal weight, plus high-temperature sleeves in a small diameter. Factory-style terminations provide a strong, secure connection.
( 1 )
$187.95
—
$199.95
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$239.25
Superchips 3.6L V6 coil packs can yield impressive results when used to replace or upgrade your older, worn-out ignition coils. Designed for the 3.6L V6 engine found in thousands of Chrysler, Jeep, Dodge, and Ram vehicles, these coils improve cold starts and provide a smoother running engine. Available in six packs, or individual replacements, Superchips 3.6L V6 coil packs are a surefire way to put some new spark in your ride while adding some underhood flair! Other product features include: * Increased spark energy * Optimized cores and windings * Epoxy-filled housings * Simple bolt-on upgrade * Yellow housing for increased aesthetics.
( 3 )
$224.95
aFe Power offers Scorcher high performance ignition coils for a wide range of cars, trucks, and vans—including models by Chrysler, Dodge, Jeep, Ram, BMW, Cadillac, Chevrolet, GMC, Ford, Lincoln, Lexus, Scion, Toyota, Audi and Volkswagen from 2000 and up. These premium coils are a direct replacement upgrade over your stock originals. They feature a lower primary resistance than factory coils, resulting in a high energy spark that ensures complete combustion from idle to redline. Scorcher ignition coils keep pace with the demands of higher RPM ranges and at wide-open throttle, always delivering the peak performance you expect. Order the model recommended for your vehicle. Additional details: * Up to 20 percent more spark energy * Increase horsepower and torque * Improved drivability and smoother idle * Easier cold starts * Longer coil life * Available individually or in a set of 4, 6, or 8
( 2 )
$130.20
Fuel Air Spark Technolory (FAST) can solve your "heart" problems! The ignition module is the heart of an automobile's ignition system, and if your dual-sync modules are overheating they'll soon completely cease to function. Loose or corroded electrical connections can also be a common cause of problems. These FAST replacement ignition modules are a simple drop-in solution to get your dual-sync distributors performing at peak efficiency.
( 2 )
$140.95
Manufacturer Rebate
PerTronix Flame-Thrower upgrades your stock coil to something with more wallop! Flame-Thrower coils deliver more than 40,000 V of spark energy to your plugs for fuller, more complete combustion. They're available in a variety of primary resistance ohm versions, with either oil-filled canisters—which keep their low-resistance windings secure and cool for reliable long-term performance—or epoxy-filled canisters for extra vibration protection. Flame-Throwers are available in chrome or black (epoxy, black only). Order the style and options preferred for your application.
( 517 )
$224.90
—
$276.90
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
