Availability
Showing In Stock Items. Show All 146 Items.
Dayco standard heater hoses carry the heated coolant from the engine block to the heater core under the dashboard, and return it to the engine. They're made for general service on light trucks and passenger cars. The ultra-durable hoses are constructed using all EPDM compounds, with spiral reinforcement for high burst strength and heat resistance of -40 degrees F (-40 degrees C) to +257 degrees F (+125 degrees C). These black cover hoses are similar to the SAE 20R3, Class D-2, and are specifically designed to be compatible with all common coolants and coolant additives. However, they are not suitable for fuel or oil transfer. Dayco heater hoses are available in a variety of diameters and lengths.
( 42 )
$38.99
—
$52.99
Keep the hot coolant circulating with molded heater hoses from Dayco. These hoses are constructed from synthetic EPDM for high-strength and resistance to oil, salt, mud, debris, coolants, and environmental elements. The inner base tube of Dayco molded heater hose is reinforced with knitted rayon for maximum strength and burst-resistance. They eliminate the need for multiple connections of hoses and clamps. Dayco hoses are specifically designed for your application to ensure proper fit and function.
( 105 )
$6.99
—
$26.99
Edelbrock Performer fuel line and fitting kits include the braided flex hose and pre-assembled ends to connect your fuel filter to the mechanical fuel pump—or, in racing applications, to the fuel pressure regulator. These kits are available in a variety of styles, providing leak-free installation in minutes. When plumbing a fuel system, trust the aftermarket performance expertise of Edelbrock!
( 112 )
$50.95
For higher temperature service or for transferring engine coolant, Continental OE Technology Series silicone heater hoses are a wise aftermarket choice, in both automotive and commercial truck replacement parts. The red silicone inner tube is reinforced by a polyester spiral, covered with an outer layer of blue silicone. These heater hoses can withstand a temperature range of -65 to 350 degrees F. A variety of inside and outside diameters is available, all shipped in 50 ft. cartons. Continental silicone heater hoses meet these SAE specifications: J20R3 HT Class A. This product is not for fuel or oil transfer applications. (Use the lined clamps, sold separately, to prevent the host from extruding or shearing through the band notches when tightened.)
Not Yet Reviewed
$267.99
—
$346.99
Continental molded radiator hoses are pre-shaped for specific applications and are constructed to original equipment manufacturers' specifications. They're molded to provide full flow-through tight bends, ease of application, and stress relief on radiator connections. Their tough Versigard rubber tube and cover resist heat, ozone, and chemical coolants—and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or surpass SAE J20R4, D1 specifications. Hundreds of models are available for fitment on a wide range of vehicles. Order the length, diameter, and shape designed for your cooling system. When it's time for a replacement, make Continental your first choice for molded radiator hoses.
( 437 )
$11.99
—
$200.99
Resistant and resilient, Edelmann power steering return hoses won't fail you. These replacement hoses are impervious to oil, heat, and ozone which cause ordinary assemblies to fail prematurely. Their tube construction will withstand internal oil temperatures of up to 300 degrees F. The hoses are assembled with zinc-chromate plated couplings and fittings for protection against rust and corrosion. Restore your vehicle's power steering with fresh Edelmann return hoses—available for fitment on countless makes and models spanning more than a half-century.
( 60 )
$13.99
—
$187.99
Avoid a potential mishap from a leaking or a blown heater hose--make an upgrade to Continental OE Technology Series HY-T black heater hoses. The HY-Ts are perfect for applications where excellent resistance to antifreeze coolants and extreme underhood temperatures is required. The tube and cover are manufactured from EPDM (ethylene propylene diene monomer) rubber with superior resistance to heat, ozone, and chemical coolants. Each hose is then reinforced with 2-spiral synthetic for additional strength and durability. Continental OE Technology Series HY-T black heater hoses are constructed to meet specifications similar to SAE J20R3--so they can take the heat.
( 36 )
$35.99
—
$66.99
Maintain proper braking with Dorman power brake booster check valves. They are built to OEM specifications and install easily in seconds. The valves are designed to ensure proper vacuum in power boosters for positive braking.
( 28 )
$4.99
—
$10.99
Are you tired of having leaks in your transmission lines? The Right Stuff transmission cooler lines are manufactured from quality materials to ensure performance and dependability.
( 347 )
$54.99
If you have a hole in your radiator hose, replace it with Dayco flexible radiator hoses. Designed to replace straight or molded radiator hoses, these precision-corrugated hoses feature knitted reinforcement and synthetic EPDM construction combined with an inserted helical steel coil spring. The Dayco design provides excellent flexibility without flattening or collapsing, as well as the ability to resist splitting, ballooning, environmental elements, coolants, and temperature changes. Dayco flex radiator hoses are available in a selection of sizes to keep your coolant flowing.
( 162 )
$6.99
—
$22.99
Dorman offers a broad spectrum of parts for automotive repair and maintenance, including brake hose locks. These brake hydraulic hose lock clips are constructed from quality material for lasting durability against harsh road and weather conditions. They are designed for use in effectively securing brake hose to the vehicle. Drive with confidence with Dorman brake hardware components.
( 13 )
$6.99
Russell speed bleeders let you bleed the brake lines on just about any vehicle all by yourself. Just replace the old bleeder screws with speed bleeders. They have an internal check valve that will pump excess air and fluid out for you. A special coating on the speed bleeders' threads keep them from admitting air into the system, and keep expelled air and fluid out. When you're done, just tighten the screws and go on to the next brake cylinder.
( 259 )
$15.95
Hayden Automotive offers a full line of accessories for your transmission coolers. These rubber transmission cooler hoses are available in a variety of sizes to suit your needs.
( 30 )
$7.99
—
$36.99
Continental OE technology series flexible radiator hoses can be shaped for specific applications and are constructed to original equipment manufacturers' specifications. Their tough EPDM rubber tube and cover resist heat, ozone, and chemical coolants, and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or exceed SAE J20R4, D1 specifications. Continental OE technology series flexible radiator hoses are available for all your custom needs.
( 54 )
$14.99
—
$37.99
Continental molded bypass hoses feature a Versigard rubber tube and cover to resist heat, oil, and weather. Their Tylanar-knit reinforcement meets or exceeds SAE J20R3, D1 specifications.
( 43 )
$7.99
—
$28.99
These Dorman brake speed bleeder screws are designed to make bleeding your brakes easy. The internal check valve allows you to back the screw out, pump the brakes to bleed out old fluid or air, and then retighten them to complete the job. No air can come back into the system and, best of all, it is easy to do by yourself. You won't have to wait for someone else to help or need expensive tools any longer. Take the headache out of bleeding your next brake job with these Dorman brake speed bleeder screws.
( 40 )
$12.99
—
$13.99
On Sale
When replacing your brake lines, or plumbing a new brake system, use Fragola Performance Systems brake adapters to complete the job properly. These brake adapters are manufactured from high-quality steel machined to mil spec tolerances and zinc coated for durable, tight connections. No matter what the job--connecting PTFE-lined hose to calipers, wheel cylinders, or hard lines, or just replacing leaky banjo bolts--Fragola brake adapters offer easy, secure installation, even where space is tight. Plumb with the best--Fragola Performance Systems.
( 107 )
$6.99
—
$17.99
Keep your ride cool and running efficiently with Dayco molded radiator hoses. These OE-style replacements feature knitted reinforcement and all-synthetic EPDM rubber construction—which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 to 257 degrees F. The inner base tube of these hoses is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hoses. Dayco molded radiator hoses are available in more than a thousand configurations, with dozens of length and diameter options, to achieve fitment on most any vehicle.
( 170 )
$9.99
—
$63.99
Edelmann power steering pressure hoses are constructed to last. The covers are highly resistant to oil, heat, and ozone, that can cause ordinary assemblies to fail prematurely. The inside tube can withstand internal oil temperatures of up to 300 degrees F. Plus, high-tensile strength braided fabric helps these hoses withstand pulsation pressures of up to 1,500 psi and bursting pressures that exceed 6,000 psi. Tubing is coated with a zinc-aluminum alloy with an aluminum-rich epoxy topcoat, and the couplings and fittings are zinc plated for rust and corrosion protection.
( 122 )
$20.99
—
$147.99
These Dorman radiator drain petcocks are designed to empty the coolant from your OEM radiator. They are made of quality materials to ensure reliability and fit. Dorman radiator drain petcocks come in different thread sizes and styles to fit your specific radiator application.
( 29 )
$4.99
Continental heater hose E-Z coils make creating your very own molded hoses a breeze. These E-Z coils maintain a consistent I.D. through a 90 degree bend, eliminating the need for a custom-molded hose. When it comes to saving time and money, Continental has you covered with their E-Z coils.
( 5 )
$11.99
—
$12.99
Replace your damaged OEM bypass hoses with Dayco molded bypass hoses! Designed using knitted reinforcement and all-synthetic EPDM construction, they provide the high strength and resistance to oil, salt, mud, debris, ozone, coolants, and extreme temperature variations that are required for OEM replacement hoses. Their inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hoses.
( 12 )
$15.99
These Walker oxygen sensor plugs are designed to plug the hole that the oxygen sensor comes out of. They are made from steel and feature male threads for an easy installation.
( 2 )
$7.99
Raybestos Element3 hydraulic brake hoses meet federal standards to ensure performance and safety in your vehicles. These replacement lines provide exceptional durability and a longer life over competitors' hoses. Element3 hydraulic brake hoses utilize premium fittings to ensure a good seal and ease of installation. Over 1,400 models are available to service vehicles from the 1940s and up. Order the hoses recommended for your application.
( 28 )
$19.99
—
$27.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
