Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
CHRYSLER Exhaust
Showing In Stock Items. Show All 31 Items.
MagnaFlow Street Series Performance Exhaust Systems
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 613 )
$1,007.00
—
$1,095.00
JBA Performance Exhaust Competition-Ready Headers
JBA Performance Exhaust competition-ready long tube headers are the number-one choice for maximum performance gains and high rpm efficiency. Their designs are dyno and race-proven to deliver the greatest possible increase in horsepower and torque throughout the rpm range. All JBA long tube headers feature large mandrel-bent stainless steel primary tubes, oversized exhaust ports, extra-thick 3/8 in. one-piece flanges, and patented merged collectors for smooth flow. Each system is designed to give the maximum amount of ground clearance possible so that lowered cars do not drag the collectors. And, in addition, each JBA system includes high-quality hardware and thorough instructions to provide a professional, no-leak installation.
( 98 )
$1,039.75
—
$1,387.25
On Sale
Flowmaster Stainless Steel American Thunder Exhaust Systems
Flowmaster Stainless Steel American Thunder exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is Flowmaster's use of mandrel-bent tubing. Their tubing allows for superior exhaust gas flow, while their stainless steel construction allows for their corrosion-resistant qualities. These American Thunder exhaust systems also feature a stainless steel muffler(s) that'll give you plenty of Flowmaster sound.
( 306 )
$1,075.95
—
$1,126.95
On Sale
Flowmaster American Thunder Exhaust Systems
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 550 )
$1,177.95
—
$1,449.95
On Sale
Flowmaster Outlaw Series Exhaust Systems
Flowmaster Outlaw Series exhaust systems are mandrel-bent for maximum performance and include specially designed mufflers. They deliver bold, dynamic interior and exterior tones for enthusiasts who covet the most aggressive components available. These systems include hardware and tips, where applicable--so installation is quick and easy. The kits are available in dozens of configurations for fitment on specific vehicles, including standard, crew, extended, and extended crew truck cabs; and long or short bed lengths. Order the Flowmaster Outlaw model designed for your application.
( 272 )
$1,299.95
—
$1,349.95
Hooker Competition Darkside Ceramic Coated Headers
Switch to the Darkside! Hooker Competition Darkside ceramic coated headers feature an exclusive proprietary black ceramic coating that offers a more refined texture and better appearance. They are manufactured from durable 16-gauge steel and have 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. These headers provide improved thermal resistance up to 1,700 degrees F, limiting heat migration through the header and reducing underhood temperatures. Unless otherwise noted, they are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 10 )
$1,024.95
aFe Mach Force XP Exhaust Systems
aFe Mach Force XP exhaust systems are constructed of mandrel-bent stainless steel and come complete with free-flowing muffler(s), OE-style bayonet hangers, flanges, and band clamps, plus all hardware necessary for a hassle-free installation. Offered in single, dual, or quad muffler configurations, their smooth curves and large diameter tubes help reduce restriction and keep exhaust gas flowing smoothly for increased horsepower and torque. Available in cat-back, axle-back, and downpipe-back designs, almost all Mach Force XP exhausts are direct bolt-on systems that require no cutting or drilling and include all necessary hardware for a hassle-free installation. Most also include wrinkle-black powdercoated or polished 304 stainless steel tip(s) with a laser-cut stainless steel aFe power badge. Select models have carbon fiber tips with CNC-machined laser-etched inserts. aFe Mach Force XP exhaust systems are an ideal combination of performance, fit, and value. Additional features include: * Fit a variety of light trucks and cars, including European models * Available with 409 or 304 stainless tubing (varies by model) * "Stepped design" models increase exhaust velocity creating a broader torque curve throughout the rpm range * Straight-through, free-flowing stainless steel mufflers absorb high-pitch tones producing powerful sound * Leak-free 360-degree sealing * Stable pipe location in high-vibration and high-heat conditions * Bayonet tips hold hanger bushings in place for an OE-style fit * Several versions convert OE single exhaust to dual exhausts * Where applicable, incorporates an exhaust valve that uses the OE exhaust valve motor (not included) to regulate exhaust flow * Some systems use a unique resonance chamber to replace the OE muffler; produces a weight savings of up to 15 lbs. * Hi-Tuck design of specific models provide extra ground clearance when using an aftermarket suspension kit Note: Some aFe Mach Force XP systems are "Race Only" products solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.
( 36 )
$1,268.00
MagnaFlow Universal Catalytic Converters
MagnaFlow universal catalytic converters by Car Sound form the basic building blocks for many applications. The main benefit of universal catalytic converters is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting, and tube-bending equipment that is readily available to most professional installers. They are extremely well made, with features such as: * A ribbed body that minimizes expansion and distortion when the converter heats up. They form a channel that protects the cushioning mat from direct exposure to exhaust gasses, and hold the ceramic catalyst in proper alignment. * A 1/2 in. lap joint where the necks meet the body. The neck does not extend into the converter body, where it could hamper exhaust flow. * Manufactured with separate dies on different sized inlets. Putting larger neck sizes on smaller bodies would reduce the flow of the converter and the quality of the product. * A monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. * Seam-welded close to the converter body for a strong, tight bond. Welding along the edge could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around. * Heavier-gauge stainless steel, tip-to-tip. They do not use inferior mixed weights and materials. * An aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter.
( 187 )
$1,045.00
—
$1,302.00
Flowmaster Force II Exhaust Systems
Flowmaster Force II exhaust systems are engineered with the latest technology for improvements in acceleration, passing power, and fuel mileage. The key to these performance enhancements is the use of mandrel-bent tubing. Force II assemblies are available in dozens of muffler and pipe configurations for fitment on thousands of year/make/model cars and trucks. Choose the size and style that's compatible with your engine type.
( 232 )
$1,126.95
Borla ATAK Axle-Back Exhaust Systems
Installed behind the rear axle, Borla ATAK axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (rear section) performance exhausts are less restrictive than factory exhaust systems. Welded tips are standard on most systems. ATAK (Acoustically Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK-equipped exhaust systems deliver the highest available dB (decibel) levels in the Borla street-legal lineup. Unlike inferior brands that lose significant sound quality at higher volumes, ATAK systems are tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. They are calibrated on a vehicle-by-vehicle basis and their specifically-tuned internal muffler cores deliver the most desirable sound. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla ATAK axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla ATAK axle-back exhaust systems with the power of race-winning Borla Multicore technology.
( 157 )
$1,059.99
Flowmaster Stainless Steel Force II Exhaust Systems
These stainless steel Force II exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is the use of mandrel-bent tubing. The tubing allows for superior exhaust gas flow, while stainless steel construction has been utilized for its corrosion-resistant qualities.
( 76 )
$1,449.95
Trick Flow® Header Build Kits
Trick Flow® header build kits contain high-quality 304 stainless steel components with a natural finish for long-lasting good looks and unbeatable performance. These kits are not prefabricated weld-up parts like many others on the market; they're for automotive enthusiasts who want to build their own stainless steel headers. Only the header flanges and collectors are prefab, leaving the creativity in the hands of the builder. Each kit includes laser-cut flanges, J-bends, collectors, and filler diamonds to connect the tubes together. The construction possibilities are endless with a Trick Flow® header build kit.
( 2 )
$1,014.99
Walker CalCat Direct-Fit Catalytic Converters
Specifically formulated for Californians, Walker CalCat direct-fit catalytic converters comply with regulations for OBD-II and pre-ODB-II vehicles. These converters have an OE-style and fit for ease of installation. The CalCats feature a stainless steel body, a heat-shielded pipe, and a structural brace for enhanced strength and durability. Get the best balance of performance and price from Walker CalCat direct-fit catalytic converters, available for a wide range of vehicle applications.
( 23 )
$1,212.99
Walker Ultra Direct-Fit Catalytic Converters
Walker Ultra Direct-Fit catalytic converters fit like OE, because the company makes original equipment! Besides the perfect fit, inside the Ultra catalytic converters are ceramic substrates with high-tech washcoat and the right loading of precious metals. The outside bodies are stainless steel for long life and durability. Catalytic converters are a vital part of your vehicle's emission control system; choose the fit, quality, and performance of a Walker Ultra catalytic converter. Order the replacement model designed for your vehicle application.
( 388 )
$1,019.99
MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converters
MagnaFlow California Grade CARB Compliant direct-fit catalytic converters comply with California Air Resources Board (CARB) emissions regulations, which require more precious metals and rigorous testing, plus the direct-fit means an easier bolt-on install for you. Choose the perfect fit for your vehicle. Features include: * Stainless steel construction * CNC-precision robotic manufacturing * Limited 5-year/50,000 mile warranty
( 3 )
$1,008.00
—
$1,381.00
MagnaFlow Direct-Fit Catalytic Converters
MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Welding, cutting, and tube-bending equipment are not required. These cats feature a ribbed body that minimizes expansion and distortion when the converters heat up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases, and they hold the ceramic catalyst in proper alignment. MagnaFlow converters use a monolithic honeycomb catalyst; the ceramic coating is designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specifications. Improper coating could result in flow restrictions or an emissions test failure. These converters are designed to exact OE specifications and are available for the most popular vehicle makes and models.
( 425 )
$1,045.00
—
$1,466.00
Dorman Direct-Fit Manifold Catalytic Converters
Dorman direct-fit manifold catalytic converters bring several parts together in one package for a turnkey installation. These top-quality exhaust manifolds are joined to the cat, and most models include gaskets and downpipe hardware, as well. Constructed from cast iron or stainless steel tubing, the units resist warping, cracking and leaks—and all undergo thorough inspection to ensure quality performance. Dorman direct-fit replacements deliver ease and convenience to your exhaust system upgrade. The kits are available for hundreds of makes and models.
( 20 )
$1,075.99
—
$1,244.99
MBRP Armor Pro Series Exhaust Systems
MBRP Armor Pro Series exhaust systems are designed and built for the most serious enthusiast who will settle for nothing less than top of the line. Optimized durability is provided by the mandrel bent T304 stainless steel construction, additional benefits of this material are its ability to be easily cleaned while withstanding extreme conditions, on or off the road. All of the tubing is mandrel bent for maximum exhaust flow and mandrel bending ensures no rippling in the bends. The end result is that these exhaust systems give you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. In addition, these exhaust systems bolt to the OEM exhaust hangers and includes all necessary hardware to complete the installation.
( 4 )
$1,134.99
Walker CalCat Universal Catalytic Converters
Specifically created for Californians, Walker CalCat universal fit catalytic converters comply with regulations for OBD-II and pre-ODB-II vehicles. These converters feature a universal, weld-in design at a great cost savings over expensive OEM converters and feature a stainless steel body, heat-shielded pipe, and structural brace for enhanced strength and durability. Get the best balance of performance and price from Walker CalCat universal catalytic converters. Order the model designed for your application needs.
( 41 )
$1,028.99
—
$1,196.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converters
MagnaFlow California Grade CARB Compliant universal catalytic converters help keep the check engine light off. They offer the right fit for a wide array of vehicles thanks to the adaptable universal design (cutting and welding is required). With highly corrosion-resistant, stainless steel construction, you can have confidence in the quality of these catalytic converters. They are designed to meet or exceed California Air Resource Board requirements and have undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states.
( 2 )
$1,291.00
JBA Performance Exhaust Exhaust Systems
When it comes to performance exhaust systems, most people are looking for three things: power, sound, and quality. JBA exhaust systems deliver the best of all three, giving them both great looks and performance. One of the first performance upgrades typically made to a vehicle is the addition of a performance exhaust system. While there is a high demand for performance sound, the capacity for power in the JBA exhaust systems gives JBA the extra edge. Each of these systems is tuned to provide the best possible exhaust tone without being overwhelming from within the vehicle. By replacing the restrictive factory exhaust system with free-flowing, mandrel-bent stainless tubing and quality performance mufflers, JBA has developed the power, sound, and efficiency desired in a vehicle. Each of these kits is finished with a polished, chrome plated, stainless steel tip that resists discoloring, along with high-quality hardware and thorough instructions for a simple bolt-on installation.
( 90 )
$1,051.95
