Availability
Milodon Street and Strip oil pans are designed for performance street as well as drag strip applications. They will fit most stock chassis and steering, as well as most headers. These well-engineered oil pans feature internal baffling that can free up additional horsepower. They're available in deep-sump and low-profile designs and are a necessity where high-volume oil pumps and increased rpm ranges are used.
( 252 )
$289.95
—
$499.95
Milodon oil pump driveshafts are CNC-machined from 4130 chromoly and are centerless-ground to avoid stress risers. These race-proven shafts eclipse breakage-prone stock units that frequently fail when used with high-volume oil systems, heavy racing oil, or high-rpm applications. The ends are induction heat-treated to reduce wear.
( 41 )
$212.95
—
$218.95
Milodon external oil systems allow for the bypassing of irregular and restrictive stock internal oil passages. They also allow for the placement of the pickup in an optimum position, plus the use of free-flowing braided line. These kits are available with static or swivel pickups with single or dual lines, and with oil pumps with different levels of output. They provide the optimum in oiling for all types of competition and come complete with all necessary bolts, fittings, O-rings, etc., for installation. A Milodon oil pan, windage tray and oil pump drive shaft will complete the package. In some cases, notching the frame is required.
( 4 )
$581.95
—
$669.95
Milodon billet aluminum big block Chrysler oil pumps are designed for all applications, including stock engines, Pro Street, and drag racing. They can be used with stock internal and external pickup systems. These pumps are manufactured from 6061 aircraft grade aluminum and then black anodized for maximum protection. Milodon billet aluminum big block Chrysler oil pumps provide more volume, yet require less horsepower to turn. They use stock-length oil pump driveshafts. A billet aluminum oil pump cover is sold separately.
( 9 )
$257.95
Milodon windage tray stud kits are required to mount a windage tray assembly correctly. The adjustable mounting feature allows you to position the tray as closely as possible to the rotating assembly (minimum 1/10 in.), so the tray can work at its maximum potential. You can also adjust your tray to avoid interference with the oil pan (special torquing requirements apply, and the tray must lie naturally flat after positioning nuts are torqued). These fasteners are available individually or in larger quantities, and are designed for fitment on a wide range of make/model engine applications.
( 39 )
$77.95
—
$81.95
Milodon Pro Touring oil pans are designed to provide an adequate oil supply during the rapid acceleration, hard deceleration, and violent turns common to motorsports. The replacement pans are available in dozens of sizes, configurations, and options. Order the model recommended for your vehicle.
( 44 )
$629.95
Milodon billet aluminum oil pump covers feature a one-piece design that requires no gaskets or O-rings for installation. They are CNC-machined from billet 6061 aircraft aluminum and then anodized for protection. These covers are available in two styles--one for Hemi-type motor mounts and one for Wedge-type motor mounts. The Milodon billet aluminum oil pump covers are designed for use with external oil pickup line systems.
( 9 )
$249.95
—
$365.95
Ideal for street and strip applications, Milodon windage trays are specially contoured for a good fit. They permit rapid oil return and protection from oil splash-back, while providing increased power. They are available in either a solid design with louvers or a high-tech screen design.
( 94 )
$79.95
—
$108.95
Milodon big block Chrysler oil pumps have the volume required for high-horsepower and rpm or big stroke Chrysler engines. They feature special 1.100 in. tall gears that output more volume, while requiring less horsepower to drive than an OEM 1.250 in. Chrysler-style gear. The oil pumps will flow a minimum of 19 gpm and include an O-ring for installation.
( 2 )
$424.95
Milodon oil pump pickups are engineered for maximum flow and long-term durability, even in the most extreme applications. They use precision-bent, thick-walled tubing with a larger-than-stock inside diameter—which is heliarc-welded to Milodon's own high-flow, compact-design pickup head. All oil pump pickups receive either a gold iridited or black powdercoat finish for ultimate durability against corrosion. Over a hundred models are available; order the pickup recommended for your year/make and engine application, oil pan style and depth, and other options.
( 229 )
$51.95
—
$170.95
Milodon drag race oil pans ensure an ample supply of lubricant under rapid acceleration. These pans have a full-length louvered windage tray and double trap doors to provide a positive oil control system. This results in consistent oil pressure and significant horsepower output increases. They also feature durable steel construction and a gold iridited finish.
( 18 )
$554.95
—
$699.95
Milodon offers these valve cover stud kits for both universal and vehicle-specific applications. They're available in a variety of thread sizes, lengths, and quantities. The steel studs come with hex nuts for easy installation.
( 23 )
$21.95
Milodon oil pan stud kits are undoubtedly the best choice for attaching your Milodon oil pan. They include heat-treated studs with rolled threads and special nuts with built-in serrated washer faces. These kits provide easy pan installation and prolonged gasket life, and their special serrated nuts guard against pan loosening during operation.
( 30 )
$42.95
—
$43.95
Milodon Gen III Hemi oil pans are designed for performance street as well as drag strip applications. They will fit most stock chassis and steering, as well as most headers. These well-engineered oil pans feature internal baffling that can free up additional horsepower. They're available in deep-sump and low-profile designs and are a necessity where high-volume oil pumps and increased rpm ranges are used.
( 6 )
$349.95
—
$374.95
These Milodon stainless steel oil dipsticks are CNC-machined from billet stainless steel to stay bright and rust-free. All dipsticks feature an O-ring seal top and bottom to positively seal against water & dirt. The braided stainless steel hose will flex around headers, tube mounts, and anything else in the way.
( 176 )
$86.95
—
$97.95
Milodon freeze plugs will not rot out, like lower cost steel ones. Your new engine assembly deserves the best. Don't get stuck trying to replace a leaking steel freeze plug behind a motor mount a year or two from now. Milodon freeze plug kits include all of the necessary external block freeze plugs, and cam and oil galley plugs for one complete engine.
( 47 )
$22.95
—
$42.95
Swap out your leaky stock timing chain cover with one of these stylish, high-quality Milodon timing covers. CNC-machined from quality steel, each timing cover is precision-checked for the proper placement of the seal and dowel pins to avoid leaks and to ensure an exact fit. Order the model you need.
( 104 )
$59.95
—
$69.95
Milodon externally adjustable oil pressure regulators will allow you to adjust the oil pump pressure without removing the oil pan or oiling system. They feature a spring-activated, stainless steel pressure valve that is adjusted by an external stud and bolt assembly.
( 6 )
$64.95
Milodon aftermarket main bearing caps not only strengthen factory 2-bolt blocks, but they will also add a measurable degree of strength to 4-bolt blocks. They are made from precision-machined, high-strength steel, which has the proper balance of strength and flexibility to allow for the transfer of increased shock loads to the crank and bearings. The secret is in the side bolts. They are angled so that they pull from the side walls of the block and not from the flimsy main web area. They'll also load the cap against the register step, which will prevent dreaded "cap walk." They can be installed by anyone with a hand drill and a tap and they come with the necessary bolts, washers, and drill bushing to complete the installation. Milodon main cap kits are available in your choice of angled or straight bolts.
( 20 )
$385.95
—
$403.95
Milodon oil pan bolt kits were specially designed to firmly hold oil pans in place and not loosen up. They feature a built-in washer face with case-hardened serrations. The washer face and small head permit the use of a socket wrench for quick and accurate installation. They can be reused time and time again.
( 63 )
$16.95
Overcome space limitations and change your filters with ease. Milodon oil filter adapters make oil filter changes quick and easy. They're made from high-quality materials to ensure durability.
( 10 )
$69.95
Milodon Street stainless valves are one-piece forged valves that are the perfect replacements for use in your street, Circle Track, or bracket racing engine. The intake valves are forged from quality HNV8 stainless steel, while the exhaust valves are forged from premium 21-4N material to withstand the extra heat and stress. The valves have hard-chromed stems and machined heads. They are designed to take a beating, with large seat margins which allows more than one regrind.
( 19 )
$26.95
—
$200.95
Milodon timing-gear drive assemblies are designed for all-out competition, but work equally well in any application. Their proven fixed idler gear system is capable of maintaining consistent cam timing without siphoning off power the way 4-gear types can. Timing changes are easy via Milodon's adjustable bolt pattern cam gears and hub assemblies. Made for strength and durability, these gear drives will last indefinitely. They are available in a flat-cover style, which uses a stock-type water pump, or an injected/blown style, which doesn't use a stock-type pump.
( 15 )
$524.95
—
$849.95
Milodon main stud kits are required where maximum gasket loading and minimal wear and tear are exerted on the block threads. These engine studs are premium-grade, race-quality studs that are created from aircraft-quality 8740 chromoly steel right in Milodon's own plant. They are ground and thread-rolled after heat treatment to ensure the exacting tolerances that Milodon requires for all of their fasteners. This ensures strength and consistent torque readings. The tensile strength of these premium fasteners is 190,000 psi, which is more than adequate for the most demanding applications. All kits come complete with 4130 heat-treated, parallel-ground washers and high-strength nuts.
( 20 )
$85.95
—
$134.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
