1962 CHEVROLET CHEVY II - In Stock Filter Options - Vendor In Stock Filter Options Parts & Accessories

Wilwood Forged Dynalite Big Brake Front Brake Kits

With Wilwood Forged Dynalite Big Brake front brake kits, you'll be ready for show, street, or strip! Track-ready performance and high-tech style come with oversized rotors, forged billet Dynalite calipers, and high performance Wilwood SmartPads. These front brake kits are fully compatible with OE master cylinder output. Options for the caliper finish and rotor design make it simple to match the brake response and style preferences on all types of daily drivers, race vehicles, and ultra-styled show machines! The choice is yours for big stopping power--choose Wilwood Forged Dynalite Big Brake front brake kits.

4.62 out of 5 stars ( 134 )

$1,100.60

—

$1,298.74

Vintage Air Gen-V SureFit Systems Evaporator Kits

Get cool with Vintage Air! Their Gen 5 SureFit evaporator kits assist with providing powerful and intelligent climate control for your vehicle. These kits utilize an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and fin-cooling coils provide outstanding performance and instant temperature adjustments. Additionally, they include variable blower speed and dash/floor/defrost blend. Vintage Air Gen-V SureFit evaporator kits include the evaporator unit and mounting brackets, louvers (where required), duct hose wiring harness, hardware, and installation instructions, along with either a bolt-in replacement control panel or Vintage Air's patented electronic cable converters to use with your factory system controls. Choose the kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high-performance blower

4.39 out of 5 stars ( 18 )

$1,418.99

Ridetech Ridepro 3 Gallon Analog Compressor Systems

Ridetech Ridepro Analog compressor systems use a 3 gallon compressor leveling system with 1/4 inch air valve, manual 4 way switches, and gauges. This 3 gallon tank and single compressor design is recommended for vehicles under 3500 pounds. This system includes a separate aluminum 3 gallon tank, Ridepro air valve block, 1/4 inch air lines, fittings, and wiring. Control your air ride equipped vehicle height with this affordable air suspension leveling system. Ridepro analog compressor systems utilizes a high quality solenoid air valve system, manual switches, analog gauges, and dependable electric components to provide simple and reliable air suspension leveling control.

3.25 out of 5 stars ( 4 )

$1,370.00

Be Cool Factory Fit Modules

Be Cool factory fit modules provide drop-in convenience, plus the capability of keeping engines up to 1,000 hp (depending on your application) running at the proper temperature! These modules feature Be Cool's factory fit radiator that has two rows of 1 in. tubes to reduce coolant temperatures, a billet filler neck, a drain petcock, and .080 in. wall hand-fabricated aluminum tanks. You can choose either a natural finish or kick it up a notch with the polished finish and dress your engine compartment with shiny performance. Be Cool offers hundreds of models and options for fitment on a wide range of vehicles. Most module kits include a new aluminum radiator, electric fan(s) with mounting brackets, a Be Cool radiator cap, an overflow catch can, and a fan wiring kit.

4.08 out of 5 stars ( 92 )

$1,299.99

—

$1,499.99

On Sale

Hays Street 650 Clutch Conversion Kits

Hays Street 650 clutch conversion kits are designed to handle highly modified engines up to 650 hp naturally aspirated (600 hp for forced induction and nitrous combinations). The new 26-spline versions work in conjunction with a modern 5- or 6-speed transmission swap. These are true street/strip clutches for spirited high performance driving or frequent track use. The high performance dual-friction disc utilized in the Street 650 has an upgraded spring hub with heavy-duty damper springs to handle greater shock loads versus a standard damper spring. The disc features a sintered metallic friction surface and an organic friction surface. It does a great job at dissipating heat and fighting the slippage found in ordinary discs, along with providing the smooth engagement characteristics of a street-style clutch. These conversion kits also provide an upgraded heavy-duty pressure plate to round out the performance clutch. The Street 650 is a great choice if you visit the track often. Order the model recommended for your vehicle application. Features and benefits: * Upgraded damper springs deliver up to 30 percent more clamping pressure than stock OE clutch * Dual-friction disc offers the best of both worlds—smooth engagement and excellent holding capacity * All Street 650 clutch kits come complete with pressure plate, disc, throwout bearing, and alignment tool

4.67 out of 5 stars ( 6 )

$1,075.95

Griffin Exact Fit Radiator Combos

Griffin Exact Fit radiator combos are the perfect pairing to take the "scary" out of electric fans! Exact Fit combos deliver Griffin's high-quality aluminum OEM fit and style radiators. They're constructed with MaxCool or ExtremeCool tubing, hand-formed aluminum shrouds, and performance electric fans. These units are easy to install, provide the best factory appearance, and fit your ride with out-of-the-box affordable performance cooling. Want to switch to electric fans? American-made Griffin Exact Fit radiator combos provide you with the perfect solution without any guesswork. Order the package designed for your specific vehicle.

4.0 out of 5 stars ( 93 )

$1,376.00

ididit Retrofit Column Shift Steering Columns

The hot rod experts at ididit put a lot of time and research into these retrofit steering columns, ensuring a perfect fit for your specific vehicle. They are designed to fit in the factory location and, in many cases, will put the steering wheel back in its original location. They include self-canceling turn signals, 4-way flashers, and knobs and handles. The columns are designed for use with aftermarket steering wheels.

4.11 out of 5 stars ( 57 )

$1,152.00

Be Cool Show & Go Modules

It's show time! Be Cool Show & Go modules will wow the judges with their mirror-like finish. Not only do these modules look show-car great, but their cooling performance will receive top honors as well! These power-cooling modules come with all you need to add stunning performance and appeal to your custom engine compartment. Pop your hood and let everyone appreciate the ultimate expression of cooling technology--the brilliance of American-made Be Cool Show & Go modules! Be Cool Show & Go cooling modules feature: * Polished performance-grade dual 1 in. core radiator * Black fans with billet Be Cool logo motor covers * Fan mounting brackets and hardware * Polished aluminum vented recovery tank * Polished billet aluminum radiator cap with Be Cool logo * Wiring harness with temperature control sending unit and relays

4.75 out of 5 stars ( 8 )

$1,499.99

The Right Stuff 4-Wheel Disc Brake Conversion Kits

The Right Stuff 4-wheel disc brake conversion kits offer everything that you need for your application in one kit without "braking" the bank. If you're experiencing brake fade or need more stopping power, The Right Stuff kits are manufactured from top-quality materials, to ensure performance and dependability. These 4-wheel disc brake conversion kits are the most complete packages available, so do the job right with The Right Stuff kits.

3.84 out of 5 stars ( 55 )

$1,327.05

—

$1,439.70

Manufacturer Rebate

AutoMeter American Muscle Instrument Clusters

Replace your factory gauges with one of AutoMeter's Amercian Muscle instrument clusters. These analog gauges feature advanced hybrid dial technology. They combine AutoMeter's signature white high-definition LED illumination and glowing red pointers for maximum readability. Each gauge has an authentic spun aluminum dial featuring embossed details and chrome bezels for a unique, classic look. The gauges come pre-assembled in factory black with chrome bezels. Best of all, the clusters plug directly into factory instrument boards without modification. They're available in a variety of sizes and layouts for specific vehicle applications.

4.43 out of 5 stars ( 7 )

$1,180.99

Manufacturer Rebate

LEED Brakes Front Disc Brake Conversion Kits

LEED front disc brake conversion kits add the safety, reliability, and performance of disc brakes to your vehicle. These kits are a direct bolt-on and precision-machined.

4.32 out of 5 stars ( 72 )

$1,003.49

—

$1,254.99

The Right Stuff Front Disc Brake Conversion Kits

Are you tired of having brake fade or not enough stopping power? The Right Stuff front disc brake conversion kits give you a complete brake kit without breaking the bank. They manufacture these kits from quality materials to ensure performance and dependability. Stop your ride in style and safely with The Right Stuff and their disc brake conversion kits.

4.33 out of 5 stars ( 220 )

$1,042.95

—

$1,085.55

OER Camaro Z28 N90 Wheels

OER Camaro Z28 N90 wheels are beautiful reproductions of the wheels originally designed for the second generation Camaro Z28 models. They are cast aluminum construction and feature the correct design and coloration.

Not Yet Reviewed

$1,039.96

Intellitronix 6-Gauge Aurora Analog Gauge Panels

Experience the fusion of aesthetics and functionality with the Intellitronix Aurora—a color changeable universal analog 6-gauge panel. This is not just a dashboard; it's a statement that speaks volumes about your love of your vehicle! Aurora instrumentation is an incredible touch for any fab/resto-mod project and direct-fit replacement for the Chevy II Nova. The units have a white polycarbonate sub surface overlay with brush stroke finish, plus your choice of chrome or black chrome bezel. Speed, oil pressure and temperature senders are included. Additional product details: * 30 standard color options; every gauge and needle are adjustable. Comes with a pre-programmed demo mode and 20 custom themes (1-15 are pre-established, 16-20 are available for custom editing) * Dimensions: 13 3/8 in. x 1 5/8 in. x 5 3/8 in. * Speedometer, Tachometer, Fuel Gauge, Voltmeter, Oil Pressure Gauge, and Water Temperature Gauge included * The 1.27 in. color TFT screen display: -- Digital readout can be selected from any of the 6 needle gauges, plus clock, odometer, tripmeter, check engine, turn signals, high beam, parking brake, high speed recall, 0-60 time and 1/4-mile time, and can display a gear indicator (with a gear indicator kit, sold separately) -- Menu functions: demo program, adjustable brightness, dash color, text color, custom dash themes, needle colors, MPH calibration, cylinder selection, fuel ohms selection * Speedometer reads up to 160 mph and works with any mechanical or electronic transmissions; or you can purchase separately a GPS speedometer sender from Intellitronix * Tachometer reads from 0 to 8,000 in 100 rpm increments, selectable cylinder modes (1-16) * Voltmeter with adjustable calibration reads from 10.0 V to 18.0 V * Oil Pressure gauge displays from 0-100 psi * Water Temperature gauge reads from 100 to 260 degrees F * Fuel Level gauge includes a list of common selectable fuel ranges or enter a custom range * Automatic nighttime dimming * Easy installation * All required sending and sensor units are included

Not Yet Reviewed

$1,039.95

SSBC-USA Drum to Disc Brake Conversion Kits

Upgrade your braking system with SSBC-USA's drum to disc brake conversion kits. You'll enjoy the rhythm of modern stopping power afforded you with their cast iron or aluminum calipers, brake pads, rotors, and all necessary brackets, hardware, and bolts. Order the SSBC-USA drum to disc brake conversion kits designed for fitment on your vehicle—front, rear, or both.

3.03 out of 5 stars ( 33 )

$1,297.00

On Sale

Hays Twister Full Race Torque Converters

Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.

5.0 out of 5 stars ( 1 )

$1,126.95

—

$1,349.95

Griffin Exact Fit Radiators

Griffin exact fit radiators feature an OEM-style stamped tank and are made of high-quality lightweight aluminum. They provide seamless installation with no modifications required—and will deliver optimum cooling performance for your auto, truck, musclecar, or hot rod. The radiators are available in downflow and crossflow styles, with many size options for specific vehicles.

4.09 out of 5 stars ( 180 )

$1,026.00

The Right Stuff Street Series Disc Brake Conversion Kits

The Right Stuff Street Series disc brake conversion kits feature all the quality components needed to convert your front or rear brakes to disc. Offered for both manual and power braking systems, Street Series kits are application-specific, maintain your vehicle's stock height or provide a 2 in. front drop, and are available with numerous component and finish upgrade options to make your braking system your own. So what's stopping you? Hundreds of kits are available; choose The Right Stuff Street Series conversion recommended for your vehicle.

3.41 out of 5 stars ( 22 )

$1,042.95

—

$1,353.45

SSBC-USA Competition Street Series Disc Brake Kits

SSBC-USA's Competition Street Series disc brake kits feature their Comp S 4-piston aluminum calipers that are sleek, lightweight, and produce increased braking power for reliable stopping power. These kits also include Big Bite cross-drilled rotors to take an even bigger chomp out of the trapped heat and gasses that reduce your ability to stop faster. Completing the kits are performance pads, mounting brackets, and hardware. The calipers are offered in several finishes: polished, clear anodized, red or black powdercoated. Replace your diminishing brakes with the serious performance power of SSBC-USA Competition Street Series disc brake kits. Order the front and/or rear model recommended for your vehicle.

Not Yet Reviewed

$1,221.00

—

$1,316.00

Manufacturer Rebate

Aldan American Track Comp Coilover Kits

Aldan American Track Comp double adjustable coilover kits are hand-built in the USA to replace your factory shocks and springs with drastically improved handling and ride quality. These kits are designed for specific vehicle applications and offer shock bodies crafted from lightweight, high-strength, CNC-machined 6061 T-6 billet aluminum. They're matched with high-tensile chrome silicon steel coil springs for strong, consistent performance. A black powdercoat provides added durability and a pleasing appearance. The coilover shocks ship fully assembled and are factory serviceable by Aldan American. You can order a pair for either the front or rear suspension, or a complete set for the entire vehicle.

3.5 out of 5 stars ( 4 )

$1,370.95

—

$1,425.95

Ridetech HQ Series Shockwave Air Shocks

Having the proper suspension plays a big part in the outcome on the track--Ridetech HQ Series Shockwave air shocks are just what you've been looking for to add that desired performance to your vehicle! They improve ride quality over steel springs and provide a huge range of tuning options. Ridetech HQ Series Shockwave air shocks' mounting styles accommodate a wide variety of applications with more configuration options than ever before. They feature aluminum impact-forged construction for leak-free operation, and a monotube design for superior oil control, ride quality, and handling. You no longer have to settle for less when you have Ridetech HQ Series Shockwave air shocks on your vehicle! Features include: * Adjustable ride height--lower and raise the vehicle quickly without sacrificing drivability or durability * For longevity, the air spring is made from same high-quality rubber that 18-wheelers use * Available in a wide range of stroke lengths * Easy and precise single rebound shock valving adjustment with 26 clicks * Large rubber external bump stop to prevent harsh bottoming out * 5/8 in. hardened shaft is precision ground and straightened to a tolerance of .001 in. for increased durability and performance * Billet end cap with integrated debris wiper to prevent seal damage * Oversized rod guide improves piston rod stability * Integral internal bump stop prevents extension crashing * Hard coat external anodizing for lasting beauty and performance * Teflon piston wiper and progressive valving provide consistent piston/bore contact for repeatable performance * Monotube bore is cathode anodized for wear resistance * Specially-contoured composite gas separator cup optimizes dead length and ensures proper nitrogen/oil separation * Long-lasting KEVLAR® -lined bearings allow wide articulation with low noise

4.33 out of 5 stars ( 3 )

$1,045.00

Sikky Manufacturing LSX Swap Headers

Sikky Manufacturing LSX swap headers allow perfect drop-in fitment. Designed around using the Sikky mount kits and components, these headers are available for several applications in mild steel, ceramic coated mild steel, or with stainless steel primaries and collectors. (See product Notes and Applications for specific model fitment details.) Features include: * V-band flange pre-installed—clamp and other half included—(not all models) * Includes new gaskets and bolts * May have one oxygen sensor bung installed per header (not all models) Ceramic coating process includes: * Parts are thermal degreased at 750 degrees for 3 hours to remove any impurities and contaminates—the most effective way to clean parts * After thermal, they go through a series of blasting on all surfaces * Once a surface profile is created, they are hand-sprayed with aluminum ceramic coating * After parts are covered, they're put in the oven and cured at 750 degrees for 2 1/2 hours * When curing is complete, they are polished to a high luster in a vibratory polisher using special ceramic beads, along with special soap and water * After polishing, they receive a wipe down and inspection before going to shipping * 3-year warranty on coatings for corrosion

Not Yet Reviewed

$1,187.49

ididit Retrofit Floor Shift Steering Columns

Better than stock replacements--ididit retrofit steering columns are designed to ensure a perfect fit and a flawless installation in your specific vehicle. The hot rod experts at ididit engineered these columns to fit in the factory location and, in many cases, will put your steering wheel back in its original location. Your column may include (depending on your application) 8-position tilt, self-canceling turn signals, 4-way flashers, a shaft, knobs, levers, and a wiring plug. Fitting your Ford, Chrysler, Chevy, or even Mopar classic with a perfectly planned aftermarket steering column is easier than ever, thanks to ididit retrofit steering columns.

4.52 out of 5 stars ( 224 )

$1,047.00

Manufacturer Rebate

Aldan American Road Comp Coilover Kits

Aldan American Road Comp coilover kits are hand-built in the USA to replace your factory shocks and springs with drastically improved handling and ride quality. These kits are designed for specific vehicle applications and offer shock bodies crafted from lightweight, high-strength, CNC-machined 6061 T-6 billet aluminum. They're matched with high-tensile chrome silicon steel coil springs for strong, consistent performance. A black powdercoat provides added durability and a pleasing appearance. The coilover shocks ship fully assembled and are factory serviceable by Aldan American. You can order a pair for either the front or rear suspension, or a complete set for the entire vehicle.

4.33 out of 5 stars ( 45 )

$1,347.95

—

$1,360.95

1962 CHEVROLET CHEVY II Parts and Accessories