Availability
Showing In Stock Items. Show All 103 Items.
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 314 )
$652.95
$205.16
—
$540.95
On Sale
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 441 )
$374.95
—
$749.95
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 60 )
$830.95
On Sale
Summit Racing™ induction kit Pro Packs start with the Edelbrock EPS Performer intake manifold, which builds horsepower and torque from idle to 5,500 rpm. Summit Racing™ induction kits also include an Edelbrock 600 cfm Performer carburetor and a 14 in. chrome steel Summit Racing™ air cleaner, plus zinc plated Summit Racing™ carb studs, a Summit Racing™ stainless steel intake bolt kit, and a Fel-Pro Printoseal intake manifold gasket set. These kits are compatible with both the 260 hp and 290 hp versions of this engine and are designed for smooth street performance.
( 23 )
$774.86
$706.98
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 222 )
$571.95
$267.26
—
$607.95
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 570 )
$270.95
$243.86
—
$595.95
Bolt on some serious performance with these Edelbrock intake manifold combos! The folks at Edelbrock know how to get the most performance out of your car and are here to make things easy for you by packaging one of their legendary intake manifolds with all of the necessary hardware and gaskets to install it in one box. At the heart of these combos is your choice of aluminum intake manifolds that delivers excellent performance at reduced weight compared to your factory manifold. To make installation easy, Edelbrock goes one step further, however, and includes all of the mounting hardware and gaskets required, so you don't have to spend all of your time looking for the small parts. All you have to do is bolt on a compatible carburetor and you are ready to go! Maximize your ride's potential without the headache with these Edelbrock intake manifold combos.
( 23 )
$299.95
—
$484.95
On Sale
Low-profile, single-plane Edelbrock Victor Jr. intake manifolds are very versatile and can be used for drag racing and Oval Track competition, as well as for street applications. Power bands range from 3,500 to 7,000 rpm, on up to 4,500 to 8,000 rpm. There are applications for small block and big block engines, as well as for 2-barrel and 4-barrel carburetors. Some manifolds accept standard restrictor plates and carb adapters.
( 61 )
$487.95
$383.36
—
$631.95
AFR Eliminator Series intake manifolds are the perfect way to "eliminate" your competition! These cast aluminum performance intakes have a 23-degree manifold configuration. They're designed for standard location intake port cylinder heads. Additional coolant outlets have been added at the rear of the manifold for custom cooling systems. Eliminator intakes can be run "as cast," right out of the box; however, AFR does recommend having the runner exits be "port matched" to your particular cylinder heads for optimal performance. Additional bungs have been cast into the top of the intake runners for EFI injectors or nitrous nozzles. Multiple heights and rpm ranges are available; order the manifold recommended for your application.
( 24 )
$412.65
—
$669.90
Summit Racing™ Stage 3 dual-plane intake manifolds are based on our Stage 2 intakes, with the same high-rise design, long separated runners, and 1,500-6,500 rpm powerband. For even more power, we added an open area under the plenum, which provides airflow to keep the fuel/air charge cooler. These intakes are the perfect compliment to your street and strip performance upgrades. The cast-aluminum intakes are CNC-machined for a precise fit, and have a square bore flange and natural finish. Chevrolet intakes will clear HEI ignition systems.
( 70 )
$257.99
ARP rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling, while promoting more consistent torque loading. These bolts are available with either hex or 12-point heads, and washers are included.
( 397 )
$19.99
—
$29.99
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 50 )
$328.99
$196.99
—
$228.99
Trick Flow's R Series Intake Manifold is tailored around big cubic inch small block engines producing 600+ horsepower in the 3,500-7,500+ RPM range. Engineers at Trick Flow optimized the R Series intake for their Super 23® 230cc cylinder heads, but found it also performs extremely well on Trick Flow's Super 23® 215cc cylinder heads as well as other brand heads with 215cc and larger ports. The secret to the manifold's success is its CAD-optimized plenum and runner design. Trick Flow engineers incorporated a one-piece single plane, spider type design with a raised floor and a large open plenum, paying special attention to smooth airflow for equalized air and fuel distribution. The design was optimized to eliminate excess material where possible, but enough was left around the port openings so the manifold can be port matched and/or fully ported. Casting it in A319 aluminum keeps the weight low, and integral bosses cast into each runner can be drilled and tapped to accept nozzles for nitrous applications. To back up all the engineering and great features, Trick Flow dyno tested the R Series Intake Manifold to ensure it can propel you to the front of the pack!
( 4 )
$449.99
On Sale
Holley offers EFI Hi-Ram intake manifolds for a variety of applications, including many vehicles from the 1950s, '60s, '70s, and '80s with a Chevy small block Gen I engine. Fuel rail kits are provided and have mounting for both long and short type fuel injectors. These manifolds offer the performance potential and the appearance of professionally prepared billet and fabricated racing intake manifolds at the affordable price of a cast-aluminum product. They deliver 21st century performance for the iconic small-block Chevy engine. * Model 300-950 is of standard Hi-Ram configuration with a "top-feed" plenum and a plenum top designed to accept up to an 105mm Gen IV LS 4-bolt throttle body, including drive-by-wire throttle bodies. * Model 300-951 is a hood-height friendly Hi-Ram variation which has a "front-feed" plenum and a forward-facing throttle body flange which accepts an up to 95mm LS 4-bolt throttle body, also, including DBW throttle bodies. It's an upgrade replacement for the Holley/Weiand Stealth-Ram intake manifold which was a popular manifold used to significantly improve the performance of 1985-92 GM 5.7L TPI fuel-injected engines. The 300-951 system installs under the OE hood for Gen 1, 2, and 3 Camaros and Firebirds. It should be compatible with most applications with a mild cowl induction hood. * Uses drive-by-wire or cable-actuated GM Gen IV LS 4-bolt throttle bodies * Throttle cable bracket is supplied in the kit * GM Gen IV LS MAP sensor port. Also has provisions for (1) 1/8 NPT, (1) 1/4 NPT, (1) 3/8 NPT fittings to the plenum * Power band: 1,500-8,000 rpm * Black anodized EFI fuel rails are machined for -6 AN O-ring fittings and come included with these EFI Hi-Ram kits * Plenum top gasket type – 3/32 in. round O-ring cord * Cast 356-T6 aluminum construction, natural, satin as-cast aluminum finish * Requires the use of early type GM or small cap MSD or Holley distributors. Not compatible with HEI distributors * 1.95 in. tall x 1.25 in. wide port flange openings
( 2 )
$999.95
$898.95
Upgrade your induction system with superior paired performance! Edelbrock Performer Air-Gap intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include a Edelbrock Performer Air-Gap aluminum intake manifold, intake gasket set, intake manifold bolts, a carburetor stud kit, and an Edelbrock Performer Series 600 cfm electric choke carburetor. The intake uses an open air space that separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge that means more power and excellent throttle response. Ready for a change? Try Edelbrock Performer Air-Gap intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.
( 7 )
$1,022.95
Few things say "musclecar" more emphatically than a Tunnel Ram manifold. You can bring back that nostalgic look and hairy-chested performance with Edelbrock's Street Tunnel Ram intake manifolds. They're applicable to all street machines, street rods, Pro-Street cars, and marine applications where low-end torque is not a major concern. Their single-plane, high-rise, dual-quad design delivers excellent mid-range torque and outstanding high-rpm horsepower, from 3,500 rpm up to 7,500.
( 14 )
$663.95
—
$1,332.95
Performer Air-Gap intake manifolds incorporate technology from Edelbrock's potent Victor series manifolds, with an air-gap design feature for ultimate street performance from idle to 5,500 rpm. The air-gap is an open air space which separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge, meaning more power and excellent throttle response throughout the power band. Order the Edelbrock Performer Air-Gap intake manifold best suited for your application.
( 31 )
$395.95
—
$708.95
Clearance
Our Summit Racing™ Stage 1 intake manifolds are the perfect performance upgrades for your engine. The intake manifolds feature a high-flow runner design to deliver improved power from idle to 6,000 rpm. These cast-aluminum manifolds are pressure-tested for leaks. Chevrolet manifolds will clear HEI ignition systems.
( 231 )
$260.99
$199.50
—
$211.99
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 29 )
$469.99
$349.99
—
$449.99
On Sale
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$897.87
$698.27
—
$843.87
Edelbrock Performer RPM Dual Quad Air-Gap manifold and carburetor kits provide everything needed to convert from a single carburetor intake to a powerful dual-quad carburetor intake system for small block Chevys. These kits include the new RPM Dual Quad Air-Gap intake, two 500 cfm Thunder Series AVS carburetors (one manual choke, one electric choke), Edelbrock high-tech progressive throttle linkage, a fuel line, and intake manifold gaskets. These kits are available in your choice of natural or the popular EndraShine finish.
( 7 )
$1,865.95
ARP stainless steel intake manifold bolts are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. These bolts are both corrosion and heat-resistant and come highly polished. Bolts are available in both hex head and 12-point types, and washers are included.
( 260 )
$32.99
—
$35.99
Replace your grungy hardware. Dress up your engine and keep it looking good with Summit Racing™ classy stainless steel intake manifold bolts. They're made from rugged Grade 8 stainless, which means that not only are they strong and durable, they're also corrosion-resistant. They're hex-head bolts for easy installation, and they fit most popular manifolds.
( 141 )
$10.99
—
$18.99
On Sale
Edelbrock's Torker II intake manifolds feature a single-plane, low-rise design that can give you top-end horsepower without affecting the mid-range. What Edelbrock did was increase the plenum volume and alter the short-side radius of the runners, to give the air/fuel charge a straight shot at the intake valves. That straight shot produces a potent power build from 2,500 to 6,500 rpm.
( 53 )
$281.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
