Filters
Summit Bucks
Clearance
How do you get serious horsepower from a crate engine? Drop in BluePrint's GM 396 c.i.d. 491 hp stroker. These base long block crate engines come with valve covers, front timing covers, and oil pans--you add your personal choice of fuel and ignition systems to finish your tire-igniting powerplant. BluePrint GM 396 c.i.d. stroker base crate engines are balanced, blueprinted, and dyno-tested to ensure brute, honest horsepower for any application. And, you receive a chart with all of the specs for your engine! Get easy installation; get the sound and the performance; get BluePrint GM 396 c.i.d. stroker base long block crate engines to drop in your ride.
( 6 )
$7,349.00
$5,999.50
Summit Bucks
Haltech's Rebel LS ECU kits provide the most cost-effective, easy-to-install, start-up and drive aftermarket ECU experience. Designed for Gen 3 or 4 LS engines, the all-in-one kit concept simplifies your purchase decision, eliminating the need for costly additional accessory purchases. Each kit arrives with a Rebel ECU, main engine harness and adapter harnesses for throttle, injectors, T56 tranmission, (DBW -Gen 4) or (cable throttle and IAC – Gen 3) alternator, knock sensor, existing GM MAP, oil pressure sensors, along with a Bosch O2 and air temp sensor with weld bungs. Installation is a breeze, using a labeled and pre-terminated drop-in harness, which easily connects to existing factory LS sensors. Engine start-up is made easy through the Setup Wizard in the Haltech NSP software and the soon-to-be-released Haltech Connect app. Answer six questions – LS Engine type, cam, throttle body, MAP, injectors and coils with the Wizard prompting a throttle calibration and system check, ensuring an engine that will quickly start, idle and drive. Drivability is continually improved with Haltech's advanced self-learning while additional tuning for your N/A, turbocharged, supercharged or nitrous LS is achieved through Haltech's NSP software. Finally, the Rebel LS ECU kit is compatible with Haltech's plug-and-play CAN accessories, such as the iC-7 dash, keypads, PDM, EGT, wideband and flex-fuel sensors.
( 2 )
$1,495.00
Summit Bucks
Summit Racing™ SPC Engine Blocks are aftermarket V8 Engine Blocks made for "Street, Performance, or Competition." These brand new clean sheet designed aftermarket blocks are cast in a modern state-of-the-art German foundry on brand new molds and machined in USA on modern high-speed machining centers that can hold the tightest of tolerances. Why start your engine build with a dirty, old, worn-out production block that needs hundreds or thousands of dollars of machine work--when you can start with a new heavy-duty casting full of high-performance features. We ship these blocks mostly finished but leave the cylinder bore .005" undersize, your machine shop will have to hone them for proper size. You can rest assured that you have a great foundation for your engine build. Check out the features below! Additional details: • Available Versions Include: GM Small Block, GM LS, GM Big Block (coming Soon,) Ford Windsor 5.0 and 351W • Cast in Germany at a Tier 1 OEM foundry • Made with class 35 Iron Alloy, Higher tensile strength and harder than competitors' class 30 • Machine-finished in USA on precision hi-speed machining centers- All dimensions are very accurate! • Priority main oiling systems & Siamese Cylinder bores • Blind head bolt holes • 4-bolt main caps, 180,00 PSI main bolts included
( 8 )
$2,249.99
—
$2,299.99
Summit Bucks
A dual exhaust system for the masses. Dynomax Header-Back Dual exhaust kits are designed for people who take pride in creating their own custom exhaust. They allow the installer to custom-tailor them to fit vehicles with non-OEM aftermarket headers. They're made from extra-long, 16-gauge aluminized steel for lasting durability, and the tailpipes exit out the sides. All necessary hardware and instructions are included for a complete installation. Mufflers are not included.
( 200 )
$155.99
—
$254.99
Summit Bucks
Get maximum cooling for the street or track. Edelbrock Victor Series high-volume water pumps are designed for maximum flow and equal coolant distribution in street cars, race cars, tow vehicles, and motor homes. The aluminum pumps have CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined impellers are larger than other impellers and have curved vanes that produce greater flow with less cavitation. Other features include heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, leakproof seals, and gaskets. Most Victor Series pumps are available in your choice of satin, black, and polished finishes, or EnduraShine.
( 185 )
$307.95
—
$537.95
Summit Bucks
Momentum Pro 5R air intake systems from aFe are designed around a large pre-oiled 7.5 in. tall, oval, cotton media filter with five layers of progressively finer mesh to maximize performance. These incredible filters fit into equally impressive one-piece housings with auxiliary air scoops and large clear sight windows. When combined with the housings, these aFe air intake systems outflow the factory unit by 31 percent—yielding average gains of 11 hp and 13 lbs.-ft. of torque. They also include a urethane plug to block the scoop if not used. Give your engine more go power with aFe Momentum Pro 5R air intake systems.
( 12 )
$447.00
—
$483.99
Summit Bucks
R&M billet wire looms use injection-molded insulators anchored to stylish billet aluminum brackets with recessed socket head cap screws to hold your plug wires. Not only does this setup look great, but it also allows you to route your wires away from exhaust heat without worrying about them coming loose. They're made for a variety of engines and are available in a wide range of colors and finishes. Features include: * Quality-machined 1/8 in. billet aluminum * Specifically designed for each application * Heat-resistant, glass-filled polyester, non-conductive clamps included * Limited lifetime warranty
( 497 )
$63.99
—
$185.99
Summit Bucks
Eddie Motorsports billet hood hinges are CNC-machined to perfection from high-quality 6061 T-6 billet aluminum. They provide a stunning alternative to your vehicle's unsightly stock stamped steel hinges and springs. These hinges are enhanced by the included nitrogen-filled gas struts and sealed bearings. Eddie Motorsports billet replacements give your hood outstanding stability and flawless operation that is simply not possible with 40- or 50-year-old stock hinges. The gas struts are made of the highest quality stainless steel for years of uncompromised performance. The struts are available in varying strengths to accommodate all types of hoods--including steel, fiberglass, and carbon fiber.
( 150 )
$455.00
—
$975.00
Summit Bucks
Designed specifically for high performance street and race engines, COMP Cams Ultra Gold aluminum rocker arms are precision CNC-machined to strict tolerances. They incorporate modern technology and design features to create the most advanced aluminum rocker arms available. Proven to withstand extremely aggressive spring pressure, the COMP Cams Ultra Gold aluminum rocker arms use their CNC-machined aluminum design for high quality and the ultimate in ratio accuracy.
( 112 )
$220.95
—
$655.95
Summit Bucks
Gene Smith Quality Reproductions offers a wide range of replacement parts for 1950s era Chevrolets, including these complete front-end grilles. Machined from stainless steel with a polished chrome finish, the stunning main grilles will be a focal point of your vintage car. Order the replica model designed to fit your application.
( 4 )
$574.99
Summit Bucks
Transmission Specialties billet aluminum TH400 valve bodies use zero OEM stock parts—everything is brand new! Unlike many production builders, TSI's valve bodies are handcrafted from beginning to end by one highly skilled and experienced technician. This process ensures that you get the highest quality product each and every time. The valve body has undergone over 40 years of contiguous, rigorous R&D and on track testing. For over 40 years, Transmission Specialties has been the trusted name in the performance automatic transmission industry. They have pioneered much of the technology that is now commonplace in the transmission marketplace. The inventors of the spragless converter and the aftermarket straight cut Powerglide planetary, TSI is known worldwide for manufacturing the highest quality transmissions and components. Product features: * Billet 6061-T6 main and small valve body construction, no steel * Laser-cut aluminum separator plate * TransGo custom heat treated, USA Made valves * TransGo custom springs * Proprietary hydraulics and worm tracks * Proprietary TransGo Pressure Regulator valve train assembly * Bores are concentric to .0003 in. insuring perfect valve operating * All parts of the valve body are within .001 in. flat and parallel * Micro RA finish ensures zero leaks and maximized fluid movement * Custom bolt pattern eliminates leaks that are common in PG valve bodies * Weighs less than 8 lbs. fully assembled * Ultra-Fast brake release is achieved with our custom hydraulic and plate design * Includes NEW transbrake Solenoid * Includes 17 precision matched reverse release springs * Best fitting and performing valve to bore design in the industry resulting in near perfect vacuum test results * Grade 8 fasteners
Not Yet Reviewed
$563.28
Summit Bucks
Gene Smith Quality Reproductions offers grille moldings made from top-quality materials that look right, fit right and last. Since 1973, Gene Smith Quality Reproductions has been producing and supplying quality parts and accessories specifically for 1955-1957 Chevrolet vehicles to provide enthusiasts with what they need to help complete their restoration project.
( 5 )
$349.99
—
$479.99
Summit Bucks
Transmission Specialties' 4L80E 300M extended spline input shafts have all the latest and greatest updates that make them the strongest on the market. Feed hole changes have been made to make the shaft stronger. The splines that go into the OD planet have been lengthened and the undercut shoulder which has a very small inside diameter, has been removed. TSI also used a hobb to cut this spline—as compared to others who single point cut, which makes for a weaker spline and is considered to be the number one spot of failure for other aftermarket billet shafts. Crafted from premium-grade 300M material, the 4L80E input shafts are engineered to be more durable than traditional shafts, ensuring reliable and consistent performance, even under extreme loads. The extended design offers increased spline engagement into the OD planet, reducing the chance of shaft failure and improving overall strength. Whether you're racing, towing, or just looking to improve your vehicle's performance, make an upgrade to your transmission with high-quality TSI components.
( 2 )
$350.39
Summit Bucks
These Edelbrock Victor series high-volume water pumps with PermaStar are designed for maximum flow and equal coolant distribution in street cars, racecars, tow vehicles, and motor homes. The aluminum pumps have CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined, cast iron impellers are larger than other impellers, and have curved vanes that produce greater flow with less cavitation. Other features include heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, leak-proof seals and gaskets. The PermaStar finish is a high performance coating that gives a super show quality smoked chrome looking finish that will not oxidize or fade and cleans easily.
( 12 )
$347.95
—
$409.95
Summit Bucks
aFe Magnum Force Stage 2 Pro 5R air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. These Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, oiled, conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. In addition, a pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter.
( 68 )
$336.00
—
$573.00
Summit Bucks
Investing in TCI transmission pans ensures the longevity of your transmission. They offer a selection of designs, depths, materials, and finishes to keep your transmission cooler and your undercarriage looking good. Skip the pans of lesser quality doomed to warp and leak; choose the policy of lasting performance from TCI transmission pans. TCI cast aluminum pans feature: * Exterior cooling fins wick away and dissipate heat * Provides additional strength and rigidity to transmission case * Ensures long transmission service-life * Include all required accessories and hardware necessary for installation TCI Max-Cool aluminum pans feature: * Black powdercoated finish * Large fluid capacity reduces internal transmission temperature * Exterior cooling fins wick away and dissipate heat * Aircraft-quality aluminum construction for strength and durability * Magnetic drain plug TCI polished die-cast aluminum pans feature: * Thicker than stock pans * Finned and polished to a high luster * Stock depth to avoid ground clearance issues * Includes drain plug for simpler fluid and filter changes * Includes necessary gaskets, filters, and installation hardware TCI chrome-plated steel pans feature: * Stock depth is easy to install * Includes drain plugs * Thicker than stock for added durability * Chrome prevents rust and adds show quality looks
( 179 )
$164.95
—
$479.95
Summit Bucks
Transmission Specialties lock-up Street/Strip torque converters have an oversized billet lock-up piston for exceptional durability in all applications. A billet front cover is standard, and all fins are furnaced brazes and Heli brazed for added strength. Stall speed can be set from 2800 to 4500 rpms. No other lock-up converter offers this strength and durability at a fair price. Select the model for your application needs. Product features: * Three New Torrington Bearings * New billet Turbine Splines * Furnace brazed and Heli brazed * XHD billet oversized lock up CI * XHD billet front cover * Computer balanced * Pressure leak tested
( 1 )
$1,004.94
Summit Bucks
WeatherTech has taken vehicle floor protection to the next dimension! Laser-measured and custom-fit, FloorLiner HP floor mats not only cover your carpeted floors, but their raised outer edge partially covers the front, back, and sides of your vehicle's foot well as well. That is a full three dimensions of protection for your vehicle. Features include: * Laser measured to perfectly fit your vehicle's specific make and model * Advanced rubber-like Thermoplastic Elastomer (TPE) compound will not break down in extreme weather environments * Retention systems and anti-skid texturing on the underside of the mat ensure placement without any shifting or sliding * Advanced surfacing carries and locks fluids and debris to a lower reservoir * 100 percent recyclable material: No latex, PVCs, cadmium, or lead * Tactile feel
( 40 )
$94.95
—
$356.85
Summit Bucks
Oval Track and road racing are murder on engines, especially when it comes to temperature. A Victor series pump will help your engine stay cool. The aluminum pumps distribute water to both sides of the block equally within 1 percent. That helps prevent hot spots, which can cause detonation and pre-ignition. The Chevy pumps also have auxiliary water outlets for use with custom cooling systems. All pumps have heavy-duty ball/roller bearings, a machined cast iron impeller, gaskets, rear cover .100 in. thicker than stock for durability. The Victor series pumps have a black anodized finish.
( 9 )
$346.95
—
$356.95
Summit Bucks
Transmission Specialties Powerglide output shaft with carrier will make the task of assembling a planetary simple. The shaft is welded to carrier; simply transfer your existing TSI gear set over in the new carrier and output shaft. Transmission Specialties also recommends replacing thrust, and needle bearings (sold separately) when doing the swap over. With over 40 years of hard work and dedication to excellence, Transmission Specialties has become one of the premiere leading manufacturers of high performance automatic transmissions, torque converters and related parts in the USA. Order the Powerglide output shaft and planetary carrier for your application.
Not Yet Reviewed
$1,059.68
Summit Bucks
The next generation of air intakes is here! aFe Momentum GT Pro Dry S air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Features and benefits of aFe Momentum GT Pro Dry S air intake systems include: * Custom, CAD-designed, roto-molded housing made from heat soak-resistant material--eliminates multiple components and ensures the coolest air intake charge possible * A large, clear sight window allows for filter inspection without removal of the air box * High-quality plastic, dyno-tuned intake tube for maximum power gains * Designed around the largest filter possible to allow optimum performance and filtration * Pro Dry S performance air filter features 3-layer, progressively finer porosity synthetic media--with a 100 percent polyurethane frame for long life and multiple cleaning cycles
( 59 )
$408.00
—
$461.00
Summit Bucks
aFe Momentum Pro Dry S air intake systems are designed around large 7.5 in. tall, oil-free, 3-layer filters with progressively finer porosity synthetic media. Each of these incredible filters fit into an equally impressive one-piece housing with an auxiliary air scoop and a large clear sight window. When combined with the housing, these systems outflow the factory unit by 31 percent—yielding average gains of 11 hp and 13 lbs.-ft. of torque. They also include a urethane plug to block the scoop if not used. Give your engine more go power with aFe Momentum Pro Dry S air intake systems.
( 3 )
$461.00
—
$499.00
Summit Bucks
aFe Magnum Force Stage 2 Pro Dry S air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, these Stage 2 intakes feature aFe's Pro Dry S air filters that improve airflow for increased horsepower and torque. Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With three layers of progressively finer mesh synthetic media between a 100 percent polyurethane top and base, Pro Dry S high-flow, oil-free, conical filters provide maximum convenience and easy maintenance with excellent airflow and 99.2 percent filter efficiency. Washable and reusable, their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. A pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter. These air intake systems are also easy to install and maintain.
( 25 )
$350.00
—
$593.00
Summit Bucks
The next generation of air intakes is here! aFe Momentum GT Pro 5R air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Their one-piece sealed housing with an auxiliary air scoop is designed to eliminate the use of multiple housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold-weather applications where you want to block off the auxiliary air scoop. These systems feature premium stainless steel T-bolt clamps and a 2-ply, reinforced silicone coupler at the throttle body for increased strength and durability. They also include a 5-layer washable and reusable Pro 5R air filter. Experience maximum horsepower gains, huge low-end towing power, increased torque, and a throaty, mean growl for your performance machine with the Momentum GT Pro 5R air intake systems from aFe.
( 99 )
$395.00
—
$447.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
