CHEVROLET - Engine KEYWORD - Summit Bucks Savings Central - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Summit Bucks

BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos

BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a black pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plugs and wires * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * Champion 3015 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.

Not Yet Reviewed

$23,399.00

—

$23,499.00

Summit Bucks

Mobil 1 Supercar Synthetic Motor Oil

Mobil 1 Supercar full synthetic motor oil specifically designed for high performance cars to provide exceptional cleaning power and wear protection and deliver outstanding overall performance. This lubricant is proven in high performance North American sports cars and suitable for use in everyday driving and high-performance track events. Mobil 1 Supercar synthetic motor oil is recommended by ExxonMobil for General Motors dexosR applications, including high-performance naturally aspirated, turbo-charged, and super-charged gasoline engines. Features and benefits include: * The first motor oil designed specifically for the Chevy Corvette to deliver maximum performance on the street or track and back, without an oil change * The only advanced synthetic motor oil specifically developed to help protect the heart of your Corvette during startup and in extreme temperatures * Enhanced frictional properties help enable improved fuel economy, higher horsepower, and reduced engine wear * Active cleaning agents help enable lower operating temperatures and longer engine life * Outstanding thermal and oxidation stability help to reduce oil aging * Excellent aeration control * Catalytic converter compatibility

4.96 out of 5 stars ( 27 )

$54.99

—

$55.99

Summit Bucks

Mobil Super Synthetic Blend Motor Oil

Mobil Super synthetic blend motor oil is recommended for gasoline-filled automobiles and light-duty trucks. It offers proven protection to help extend the life of your engine by preventing the formation of sludge and harmful deposits. This provides outstanding wear protection under a wide variety of operating conditions, including the benefit of easier cold starting. Extend the life of your engine with Mobil Super synthetic blend motor oil. Order the weight recommended for your specific vehicle and engine size. Features and specs: * 5,000 mile protection guarantee * Contains 15 percent more cleaning additives than their basic synthetic blend motor oil * Meets or exceeds the latest industry specifications * Available in several viscosities * Available individually or in packs

4.92 out of 5 stars ( 38 )

$19.99

—

$59.97

Summit Bucks

BluePrint Builder Series 632/815HP Standard Edition EFI Crate Engine and 4L80E Transmission Combos

BluePrint Builder Series 632/815HP Standard Edition EFI crate engine and 4L80E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy big block-compatible 632 (c.i.d.) engine that produces 815 horsepower, this standard edition builder Pro Series includes a polished pulley kit and 4L80E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 775 lbs.-ft. of torque. When you need or want a new powertrain for your GM ride, go with the authority in crate engines and their BluePrint Builder Series 632/815HP Standard Edition EFI crate engine and 4L80E transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Bore is 4.600 in. * Main caps are 4-bolt * One-piece rear main seal * Mechanical fuel pump provision * Tall deck (approximately 0.400 in. taller and wider than OEM block) Rotating Assembly: * New BluePrint forged crankshaft * Stroke – 4.750 in. * Forged H-beam 6.635 in. connecting rods * Forged pistons * Internal balance * Non-weighted harmonic balancer Aluminum Cylinder Heads: * BluePrint PS8012 performance models (0.300 in. raised exhaust port vs. OEM) * Chamber – 119cc * Valves are 2.300 in. intake and 1.880 in. exhaust * Exhaust runners are 358cc intake and 125cc exhaust * Builder must verify clearance of exhaust, shift linkage, steering components, etc. before ordering Camshaft: * Hydraulic roller * Intake valve lift – 0.698 in. * Exhaust valve lift – 0.698 in. * Intake duration at 0.050 in. of lift – 272 * Exhaust duration at 0.050 in. of lift - 282 * Lobe separation angle (LSA) – 110 degrees Ignition Timing * Initial is 10-16 degrees (16-20 degrees for Dominator-style carburetors) * Total is 32-34 degrees (by 2,500 rpm for Dominator-style carburetors) * Firing order is 1-8-4-3-6-5-7-2 Automatic Transmission Package: * Complete 4L80E package with electronic controller (lockup capability) * Torque converter with 3,800–4,200 rpm stall * Non-weighted flexplate * Starter * Gear ratios are 2.482:1 (first), 1.482:1 (second), 1.000:1 (third), 0.750:1 (fourth), 2.077:1 (reverse) Other Components: * Single plane aluminum intake manifold with satin finish * Complete EFI system with Aeromotive A1000 fuel pump * Valve covers, oil pan, and timing cover * Pro Billet distributor * Front accessory drive with polished finish (includes alternator, A/C, power steering, water pump, pulleys, and belts) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Recommended fuel is 91 octane. Recommended oil is BPP710. Not designed for EGR-compatibility.

Not Yet Reviewed

$30,999.00

Summit Bucks

Mobil 1 Synthetic Motor Oil

What benefits will you gain with the use of Mobil 1 synthetic motor oil? For starters, it's uniquely formulated to provide exceptional protection against engine wear, under normal or even extreme conditions. It also provides thermal and oxidation stability allowing maximum oil change intervals. There's a reason Mobil 1 advanced full synthetic engine oil became the official NASCAR sponsor in 2003. Find out for yourself and order the viscosity grade designed for your application. More product benefits: * Helps prevent deposits and sludge build-up, prolonging your engine's life * Quick cold weather starting for ultra-fast protection * Reduced stress on starting system components * Enhanced frictional properties to aid fuel economy

5.0 out of 5 stars ( 15 )

$7.99

—

$47.94

Summit Bucks

Manufacturer Rebate

Mobil Delvac Extreme Motor Oil

Mobil Delvac Extreme motor oil is a premium synthetic blend, high-performance diesel engine oil. It helps extend engine life, while providing long drain capability for modern diesel engines operating in extreme conditions. Delvac Extreme is recommended for use in a wide range of heavy-duty applications and operating environments found on- and off-highway, including engines operating under heavy loads. Fully backward compatible, this oil delivers exceptional performance in both newer and older heavy-duty engines. It delivers updated high-temperature performance under the extreme operating environments found in the trucking, mining, construction, and agricultural industries. Accordingly, Mobil Delvac Extreme motor oils meet or exceed the requirements of API CK-4, CJ-4, CI-4 PLUS, CI-4, and CH-4 service categories, as well as key OEM requirements.

4.66 out of 5 stars ( 29 )

$23.99

—

$95.96

Summit Bucks

Trans-Dapt Performance Swap-In-A-Box Complete Engine Swap Kits

Trans-Dapt Performance Swap-In-A-Box complete engine swap kits feature everything you need to transplant that new engine into your ride. They include a set of application-specific headers (painted or ceramic coated), motor and transmission mounts, and some kits contain oil filtration components. By matching up these parts by vehicle, Trans-Dapt ensures a swap with minimal modifications needed for installation. Give your ride a heart transplant using one of these turnkey Swap-In-A-Box complete engine swap kits!

3.5 out of 5 stars ( 62 )

$720.99

—

$2,004.99

Summit Bucks

BluePrint Engines GM 400 C.I.D. 500 HP EFI Stroker Fully Dressed Long Block Crate Engines

BluePrint Engines GM 400 c.i.d. 500 hp EFI stroker fully dressed long block crate engines put down a whopping 500 hp and 473 lbs.-ft. of torque! They feature a 30-month/50,000-mile warranty and are the perfect choice for drivable and reliable high-end performance. Additionally, These assemblies are manufactured under strict tolerances and provide outstanding, consistent results. BluePrint Engines GM 400 c.i.d. 500 hp EFI stroker base fully dressed long blocks crate engines are also dyno-tested and include the dyno sheets. Features include: * BluePrint cast iron block * Cast steel 3.750 in. stroke crankshaft * 5.700 in. long connecting rods * Forged pistons * 10.3:1 compression * Hydraulic roller camshaft, .555 in. lift intake, .576 in. lift exhaust, 236/242 intake/exhaust duration at 0.050 in. lift with 110 degree lobe separation * BluePrint aluminum cylinder heads * Premium single true roller timing set * Dual plane intake manifold

5.0 out of 5 stars ( 1 )

$9,299.00

Summit Bucks

Mobil 1 High Mileage Motor Oil

Mobil 1 High Mileage motor oil provides unsurpassed wear protection for engines with over 75,000 miles. This advanced full synthetic lubricant features a proprietary blend of high performance synthetic base oils that deliver up to 500,000 miles of proven protection. The oil has a higher base oil viscosity to help reduce leaks and provide better high-temperature protection (except 0W-20)—plus a boosted level of seal conditioner to protect engine seals and guard against leaks. Mobil 1 High Mileage motor oil can also help reduce sludge deposits that are due to less-than-adequate maintenance practices. Choose the oil weight recommended for your application.

5.0 out of 5 stars ( 7 )

$7.99

—

$53.94

Summit Bucks

Mobil 1 ESP X2 Motor Oil

Mobil 1 ESP X2 is an advanced full synthetic motor oil specifically designed to provide outstanding engine cleanliness, wear protection, strong durability, and advanced fuel economy to keep your engine running like new. Mobil 1 ESP X2 is their latest technology combining durability and protection with a low-viscosity, low-friction motor oil that was designed in cooperation with key European Original Equipment Manufacturers. The ESP X2 has been expertly engineered to help prolong the life and maintain the efficiency of emission systems in new emerging diesel and gasoline powered European vehicles.

5.0 out of 5 stars ( 5 )

$51.99

Summit Bucks

Mobil 1 Turbo Diesel Truck Motor Oil

Mobil 1 Turbo Diesel Truck motor oil is full synthetic heavy-duty performance diesel engine oil that can help extend engine life while providing long drain capabilities. Engineered with state-of-the-art technology, this oil assists in delivering exceptional performance in modern low-emission engines. It meets or exceeds demanding specifications of major truck manufacturers—which means a single engine oil formulation can be used for mixed fleet operations. Mobil 1 Turbo Diesel Truck motor oil offers benefits: * Outstanding thermal and oxidation stability * Enhanced film strength at high temperatures * Inherent stay-in-grade shear stability * Low volatility * Exceptional low-temperature pump-ability * Outstanding resistance to corrosion * Helps promotes component longevity * Enhanced TBN quality reserve

5.0 out of 5 stars ( 2 )

$8.99

—

$45.99

Summit Bucks

Mobil 1 Extended Performance Motor Oil

Mobil 1 Extended Performance motor oil offers excellent overall wear protection to help extend engine life—even up to 15,000 miles between oil changes—guaranteed. The formula combines a proprietary blend of high performance synthetic base stocks with a precisely balanced additive component system to deliver unsurpassed wear protection. Suitable for cars, vans, and light trucks, this lubricant is uniquely designed to help provide outstanding levels of performance, cleaning power, and engine protection. Keep your engine running like new—during extended oil change intervals—with Mobil 1 Extended Performance motor oil. Order the weight recommended for your application, in one or five quart volumes.

4.67 out of 5 stars ( 6 )

$8.99

—

$53.94

Summit Bucks

Manufacturer Rebate

Mobil Delvac 1300 Super Motor Oil

Run your business confidently with Mobil Delvac 1300 Super motor oil—an advanced diesel formula that helps extend engine life. These products meet or exceed OE requirements and deliver high performance in both on- and off-highway applications. Fully backward compatible, they deliver exceptional performance in both newer and older heavy-duty engine designs. Accordingly, it meets or exceeds the requirements of API CK-4, CJ-4, CI-4 PLUS, CI-4, and CH-4 service categories, as well as key factory requirements. Mobil Delvac 1300 Super oils are universal—meaning they may also be used in gasoline engines requiring the API SN specification. This oil is a tailored formulation that delivers excellent wear and engine protection, extended drain capability, plus outstanding high temperature performance and engine cleanliness. Developed in close collaboration with major OEMs, Mobil Delvac 1300 Super is recommended for use in a wide range of heavy-duty applications and operating environments (trucking, mining, construction, agricultural, marine, etc.). Order the weight(s) best suited for your application.

4.83 out of 5 stars ( 12 )

$20.99

—

$79.99

Summit Bucks

BluePrint Builder Series LS427/625HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos

BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 625 horsepower, this standard edition builder series includes a polished pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 565 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * OEM style (4.060 in. bored to 4.069 in.) * Main caps are 6-bolt * One-piece rear main seal Rotating Assembly: * New forged crankshaft * Stroke – 4.125 in. * Forged connecting rods (6.125 in.) * Forged pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.624 in. * Exhaust valve lift – 0.624 in. * Intake duration at 0.050 in. of lift – 239 * Exhaust duration at 0.050 in. of lift - 255 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * ECM supplied with calibration (initial and total timing are controlled by PCM) * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * All required (to make engine run) sensors and wiring harness (LS controller package only controls engine) * Unlocked ECU for local Dyno shop tuning refinement * LT4 87mm DBW (Drive-By-Wire) throttle body * Valve covers, retro-fit oil pan (fits most 1955-95 GM front engine, RWD, V8 cars), and timing cover * LS3 car intake manifold * Fuel injectors (42 lbs.) and return-less fuel rail * Coil packs * Spark plug wires * Gas/throttle pedal * Complete front accessory drive includes A/C, power steering, alternator, belts, and pulleys * ACDelco 41-985 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91-93 octane. Recommended oil is BPP710. Not designed for use with dry sump or pollution-controlled vehicles.

Not Yet Reviewed

$26,499.00

Summit Bucks

Mobil Full Synthetic Motor Oil

Mobil full synthetic motor oil is formulated for vehicles that are upgrading from conventional motor oil or synthetic blend motor oil, and vehicles that require full synthetic motor oil. It outperforms conventional oil, helps extend engine life, and provides guaranteed protection that is 1.5 times longer (up to 7,500 miles between oil changes) than the conventional and synthetic blend oil. Mobil Full Synthetic helps prevent sludge, deposit formation and to help reduce engine wear with a balanced additive system formulation. It has excellent resistance to oil breakdown, providing proven long-lasting protection, and maintaining oil viscosity at high operating temperatures. Mobil Full Synthetic motor oil is recommended for all types of gasoline-powered vehicles, including those with turbocharged engines found in passenger cars, SUVs, and light-duty vans and trucks.

4.83 out of 5 stars ( 24 )

$29.94

Summit Bucks

BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and TKX Transmission Combos

BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a polished pulley kit and TKX manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 5-speed TKX Transmission Package: * McLeod Super Street Pro twin-disc clutch * Hydraulic throwout bearing * Bellhousing * Non-weighted billet flywheel * Starter * Gear ratios are 2.87:1 (first), 1.89:1 (second), 1.28:1 (third), 1.00:1 (fourth), and 0.68:1 (fifth) * Torque converter with 2,200–plus rpm stall Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plug wires * Champion 3015 spark plugs (0.040 in. gap) * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys. Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.

Not Yet Reviewed

$22,449.00

Summit Bucks

BluePrint Builder Series LS427/585HP Standard Edition EFI Crate Engine and T56 Transmission Combos

The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a polished (or black) pulley kit and T56 manual transmission. The BluePrint aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged steel crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and T56 trans combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged steel crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.

Not Yet Reviewed

$26,499.00

Summit Bucks

BluePrint Builder Series LS376/510HP Standard Edition EFI Crate Engine and TKX Transmission Combos

BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 510 horsepower, this standard edition builder series includes a polished pulley kit and T56 manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this engine assembly produces 440 lbs.-ft. of torque. When you need or want a new powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX trans combos. Product description and specifications: Block: * High strength cast iron (LSX Style) block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0662 in. Bore * 6-bolt main Rotating Assembly: * Nodular iron crankshaft * 3.622 in. stroke * 6.098 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internally balanced front and rear Cylinder Heads: * BluePrint LS3 aluminum cylinder heads * 69cc chamber * 2.165 in. intake/1.590 in. exhaust valves * 259cc intake/102cc exhaust runners Cam Specs: * Hydraulic Roller Cam * 0.612 Intake/0.585 Exhaust Lift * 225 Intake/238 Exhaust duration * @.050-113 Degree Lobe Separation Ignition Timing: * Ignition Timing and Spark Advance are Controlled by BluePrint Engine Calibrated ECU * Transmission Controller Required if pairing to an automatic (ECU Does Not Offer Transmission Control) Other parts: * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS Swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and Fuel Rail Kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Notes: This engine requires a non-weighted flex plate such as (BPP12654640) / flywheel (BPPLS1611). Recommended fuel: 91 Octane. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The BluePrint Engines LS controller package contains a fully tested, calibrated, locked ECU, optimized for this specific engine. This package has undergone extensive testing for performance, reliability and the safety of you and your engine.

Not Yet Reviewed

$21,899.00

Summit Bucks

BluePrint Builder Series Chevy LS427/800HP Supercharged Crate Engine and 4L80E Transmission Combos

BluePrint introduces its Builder Series Chevy LS compatible 427 c.i. 800 hp Magnuson Supercharged crate engine and 4L80E transmission combos. Save time and money by ordering these two key parts in one economical package. The powerful performance engines can be ordered with or without a front drive pulley kit (accessory drive system includes water pump, alternator, power steering pump, A/C compressor and all belts and pulleys). These supercharged engines come with a plug-and-play Holley Terminator X EFI for maximum standalone engine management. Engines are assembled with a complete 4l80E automatic transmission package (details below): Combo details and specifications: * New BluePrint Engines high-strength cast iron (LSX style) block * Magnuson 2650 Supercharger for maximum power, sleek and compact design for a hassle-free installation * Holley mid-mount accessory drives are used for maximum clearance and a clean installation * Improved water jacket design for improved cooling * Extended 5.75 in. cylinder skirt for added piston stability at BDC for added strength * Thicker deck faces, making surfaces more rigid and ideal for forced induction applications * Forged pistons for strength and maximum performance * Hydraulic roller camshaft for a broad power curve and rich idle * Priority main oiling for optimum performance and protection * 6-bolt main to increase strength and durability * One-piece rear main seal * BluePrint aluminum LS3-style cylinder heads * LS3-style front and rear covers * 376 c.i. bore/stroke --- Bore - 4.662 in. --- Stroke - 3.622 in. * 427 c.i. bore/stroke --- Bore 427 c.i. - 4.665 in. --- Stroke - 4.125 in. Automatic transmission package: * Complete 4L80E package with electronic controller (lockup capability) * Torque converter with 3,800–4,200 rpm stall * Non-weighted flexplate * Starter * Gear ratios are 2.482:1 (first), 1.482:1 (second), 1.000:1 (third), 0.750:1 (fourth), 2.077:1 (reverse)

Not Yet Reviewed

$35,799.00

Summit Bucks

Mobil Full Synthetic High Mileage Motor Oil

Mobil full synthetic high mileage motor oil is specially designed for vehicles with over 75,000 miles that are upgrading from conventional motor oil or synthetic blend motor oil, and vehicles that require full synthetic motor oil. It outperforms conventional oil, helps extend engine life, and provides guaranteed protection that is 1.5 times longer (up to 7,500 miles between oil changes) than our conventional and synthetic blend oil. Mobil Full Synthetic High Mileage helps to prevent sludge, deposit formation and to help reduce engine wear, with a balanced additive system formulation and extra seal conditioner to help prevent leaks. It has excellent resistance to oil breakdown, providing proven long-lasting protection and maintaining oil viscosity at high operating temperatures. Recommended for all types of gasoline-powered vehicles, including those with turbocharged engines, found in passenger cars, SUVs, and light-duty vans and trucks.

5.0 out of 5 stars ( 10 )

$29.94

—

$31.99

Summit Bucks

Mobil 1 ESP Motor Oil

Mobil 1 ESP motor oil offers protection for gasoline and diesel engine emission systems, including diesel particulate filters. Featuring Emission System Protection (ESP), this synthetic oil will help prolong the life and maintain the efficiency of your vehicle's emission system. It's formulated to be fully compatible with passenger car diesels that have the latest Diesel Particulate Filters (DPFs) and gasoline catalytic converters. Outstanding performance and protection is available by utilizing the Mobil 1 ESP motor oil formulated for your application.

4.67 out of 5 stars ( 3 )

$59.94

Summit Bucks

Mobil 1 Advanced Fuel Economy Motor Oil

Start your engines … and start saving with Mobil 1 Advanced Fuel Economy motor oil. Its low-viscosity, advanced full synthetic formulation can help to increase engine efficiency and improve fuel economy. Mobil 1 AFE oil is engineered with a proprietary blend of high performance synthetic base oils, fortified with a precisely balanced component additive system to provide overall lubrication and wear-protection performance for many driving styles and conditions. Features include: * Low viscosity, advanced full synthetic formula--helps increase engine efficiency and improve fuel economy, based on 0.2 to 2.3 percent potential fuel economy improvement obtained by switching from higher viscosity oils to a 0W-20 or 0W-30 grade. Actual savings are dependent upon vehicle/engine type, outside temperature, driving conditions and your current motor oil viscosity. * Outstanding thermal and oxidation stability--helps reduce oil aging for long-lasting protection * Outstanding low-temperature capabilities--supports quick cold-weather starting and provides fast protection to help extend engine life * Precisely balanced additive component system--provides excellent overall lubrication and wear protection performance for many driving styles and conditions, from mild to severe, where a 5W-20 or 0W-20 is recommended

5.0 out of 5 stars ( 4 )

$8.99

—

$45.99

Summit Bucks

Mobil 1 Truck and SUV Motor Oil

Mobil 1 Truck and SUV motor oil is specially formulated to provide extra-protection for hardworking truck and SUV gasoline engines. These advanced full synthetic motor oils are specifically designed and prepared to provide outstanding performance under all operating conditions, and have been tested and proven in the 5,000 lb. towing test. Mobil 1 Truck and SUV motor oil is formulated with high-performance base oils and a 10 percent boost in an additive that helps prevent deposit formation and protects against wear.

5.0 out of 5 stars ( 2 )

$9.99

—

$65.94

Summit Bucks

Mobil Delvac 1 LE Motor Oil

Mobil Delvac 1 LE motor oil is a fully synthetic, heavy-duty diesel engine blend that combines advanced engine protection for modern low-emissions vehicles, together with enhanced fuel economy potential. Other sustainability-related benefits include engine durability, emissions system protection, and extended drain capability. This lubricant utilizes state-of-the-art technology to deliver exceptional performance—and is well-suited for an extensive array of diesel-powered commercial vehicles for both on- and off-highway use in industries such as transportation, mining, construction, and agriculture. Mobil Delvac 1 LE motor oil meets or exceeds an extremely broad range of industry and manufacturer specifications from around the world.

Not Yet Reviewed

$130.99

95 Results Found For "Engine"