Availability
Special Offer
COMP Cams Xtreme Energy cam and lifter kits are built to take advantage of the latest cam technology and provide maximum performance. Whether your use is off-roading, towing, or street performance, there are Xtreme Energy options available for you. By using an aggressive lobe profile, they provide better throttle response and more top-end horsepower than equivalent kits from other manufacturers, while delivering increased engine vacuum. Order the model designed for your vehicle and engine application.
( 379 )
$282.95
—
$371.95
Special Offer
COMP Cams is bringing the muscle car sound back, and it's nastier than ever! Let's face it--few things serve to grab our attention at a car show or cruise night more than a car with a thumping, high performance idle. In an ongoing quest to provide you with the performance and sound you demand, COMP Cams engineering team proudly introduces the Thumpr Series cam and lifter kits. The lobe profile and grind characteristics of these Thumpr camshafts use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize the rough-idling characteristics of the cams. This gives you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. Thumpr camshafts are available in different grind profiles; each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. Thumpr Series cam and lifter kits deliver a substantial power increase over an identical hydraulic flat tappet grind without sacrificing reliability or ease of maintenance.
( 210 )
$357.95
—
$371.95
Special Offer
Designed for hot street/strip cars, COMP Cams Magnum Series cam and lifter kits require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic cam and lifter kits provide maximum top-end performance for your high performance car.
( 139 )
$290.95
—
$371.95
Special Offer
A car with thumping, high performance idle is sure to grab your attention. COMP Cams is bringing the muscle car sound back, and it's nastier than ever with their Big Mutha' Thumpr hydraulic flat tappet cam and lifter kits. With the meanest sound in the Thumpr line, Big Mutha' street/strip kits produce a very rough idle. And you can rest assured that the aggressive muscle car attitude of your Thumpr-equipped car will be backed up by proven horsepower performance. The kts include camshaft, a set of matched lifters, assembly lube, decals, and instructions.
( 14 )
$365.95
Special Offer
Increase your street machine's gas mileage and powerband performance! COMP Cams High Energy cam and lifter kits are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These kits offer good increases in both gas mileage and power throughout the rpm range for most street applications.
( 174 )
$279.95
—
$367.95
Special Offer
Stage 8's Grade 8 locking header fasteners use a patented system that consists of a grooved hex-head bolt or nut, a retainer, and a snap clip. The retainer fits over the bolt head and locks the bolt against the header tube, and the snap clip holds the retainer in place. Once Stage 8 header fasteners are tightened down, they won't back out, eliminating leakage and blown header gaskets from loose bolts.
( 386 )
$53.40
—
$141.61
Special Offer
Manufacturer Rebate
RAM Concept 10.5 dual-disc organic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 750. RAM Concept 10.5 dual-disc organic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit
( 4 )
$859.00
Special Offer
RAM HDX clutch kits are ideal for vehicles that will see mild street and occasional track use. These performance minded clutch kits will provide more clamping pressure over a stock unit and can handle power levels up to 450 hp. All HDX kits feature an increased clamp load pressure plate while providing smooth clutch engagement with only a slight increase in pedal effort. The HDX clutch disc features RAM's premium organic facing material for optimum performance. Most RAM clutch discs utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 63 )
$269.00
—
$649.00
Special Offer
RAM Muscle Car clutch kits are the perfect choice for mildly modified street cars and trucks where driveability is most important. RAM Muscle Car kits are popular for older restoration vehicles as well as late model cars and trucks with basic bolt on engine modifications such as headers and air intakes. These RAM kits offer super smooth clutch engagement and increased holding power with only a slight increase in pedal effort. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 77 )
$239.00
—
$379.00
Special Offer
Moroso PCV air/oil separators will help increase your engine's performance. These air/oil separators will capture excess oil and keep it out of your intake tract so that your engine will breathe cleaner intake air--better air equals better performance. Moroso offers universal and custom fit versions in small and large body sizes. The large bodies, besides having more capacity, feature a bottom drain with an elbow that makes draining the collected oil virtually mess-free. Their polished billet aluminum bodies can be chromed, painted, or powdercoated. The small units offer a 2-piece body that unscrews for draining and are available raw or with polished or anodized finishes.
( 325 )
$187.75
—
$237.99
Special Offer
RAM Concept 10.5 dual-disc metallic clutch kits usher in a new era of RAM clutch design. The Concept kits introduce modular dual-disc systems with effective performance improvements. Perfected design, better performance, and a competitive price ... what an idea! Designed for use on applications with horsepower rating of up to 1,050. RAM Concept 10.5 dual-disc metallic clutch kits feature: * Higher clamp load 10.5 in. pressure plate offers smooth pedal effort and more surface area to dissipate heat * Poly-coil sprung hub top disc allows for dampening on engagement to eliminate harsh starts and transmission fatigue * Billet modular stands are precision-machined to eliminate distortion and provide a stable platform to house the clutch unit
( 1 )
$1,189.00
Special Offer
RAM Force 10.5 dual disc clutch kits have a strap-driven floater plate and are precision-balanced for quiet operation. The sprung hub top disc absorbs shock and reduces driveline noise. Force clutches are available with your choice of a 300 Series friction disc or a 900 Series disc. The 300 Series organic disc models are capable of handling 500 to 800 hp; while the 900 Series metallic models can handle between 600 and 1,200 hp. These kits use a marcel spring—a thin, wavy device that helps to eliminate the go-or-no-go tendency that similar dual disc clutches have. RAM Force 10.5 dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the model recommended for your vehicle and engine application.
( 4 )
$1,425.00
—
$1,859.00
Special Offer
RAM Powergrip clutch kits offer your vehicle the perfect blend of drivability and performance. This dual-purpose clutch kit will provide more clamping pressure over a stock unit and can handle power levels up to 550 hp. All Powergrip kits feature an increased clamp load pressure plate, providing crisp clutch engagement with only a slight increase in pedal effort. The Powergrip clutch disc features a combination dual-sided disc with RAM's premium organic facing material on one side and RAM's premium 900 series metallic facing material on the other side. This allows the Powergrip unit to deliver optimum street/strip performance. The RAM Powergrip discs also utilize an 8-spring hub to maximize disc strength and durability. All kits include the pressure plate, clutch disc, alignment tool, and release bearing where applicable.
( 52 )
$375.00
—
$739.00
Special Offer
These RAM single disc push-type conversion C4 Corvette clutch kits are designed to replace the pull-style clutch and dual mass flywheel in your factory 1989-96 C4 Chevrolet Corvette. They consist of an aluminum flywheel, a high-clamp Borg and Beck-style pressure plate with a 2,800 lb. clamp load, and a RAM 300 Series organic clutch disc. The RAM single disc push-type conversion C4 Corvette clutch kits use an internal hydraulic throwout bearing, replacing the factory release mechanism, to complete the install. Best of all, these clutch kits are capable of handling up to a 700 hp holding capacity.
( 2 )
$1,099.00
—
$1,427.00
Special Offer
COMP Cams Xtreme marine cam and lifter kits take advantage of the newest developments in camshaft design. Their aggressive lobe design produces better throttle response and top-end horsepower than other systems with the same duration at .050 in., while delivering increased engine vacuum. These kits are available for everything from pleasure boats to race applications, so you can always have Xtreme performance on the water.
( 20 )
$290.95
—
$372.95
Special Offer
Famous factory camshafts of the past are combined with the latest advanced camshaft technology to give you the sound and excitement of the musclecar era. COMP Cams Nostalgia Plus cam and lifter kits are specifically designed to capture the essence of the original '60s musclecar with additional power that you can feel in the seat of your pants. The new technology creates awesome response to give new life to any hot rod.
( 38 )
$360.95
—
$371.95
Special Offer
COMP Cams Xtreme Energy 4x4 cam and lifter kits are built to take advantage of the latest cam technology to provide maximum performance and low-end torque for your vehicle. Whether your use is off-roading or towing, there is an Xtreme 4x4 for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers, while delivering increased engine vacuum.
( 68 )
$279.95
—
$338.95
Special Offer
COMP Cams Magnum solid lifter cam and lifter kits are specifically designed for the street enthusiast looking for more power and that Pro Street sound. Whether your choice would be the 270s with low-speed torque and noticeable idle, or the 306s for larger cubic inch engines with tremendous high-rpm power and radical idle, one of the Magnum series cam and lifter kits will fit your engine's needs.
( 30 )
$340.95
—
$370.95
Special Offer
RAM premium replacement clutch kits are the first choice of professional installers, because each set contains the correct replacement parts to ensure proper fit and operation in your vehicle. Kits include an OEM diaphragm or lever style pressure plate, clutch disc, and a clutch-alignment tool. Some clutch sets will include a throwout bearing. The clutch disc features either a 5- or 6-spring standard hub or helix hub, just like the originals. These clutch sets are great for unmodified street vehicles and restorations. The flywheel must be resurfaced or replaced prior to installation to validate the warranty. RAM clutch kits are available in more than a hundred models for fitment on thousands of vehicle-specific applications.
( 89 )
$196.99
—
$1,022.50
Special Offer
RAM Concept 9.5 dual disc clutch/billet flywheel kits are the perfect entry level dual disc clutch systems. Each kit features an increased clamp load pressure plate, 9.5 in. premium-faced organic or metallic clutch discs, and a RAM surface-ground and balanced billet steel flywheel. The pressure plate provides a silky-smooth clutch pedal feel, while the dual disc provides additional holding capacity when compared to single disc systems. RAM Concept 9.5 units also utilize a sprung hub top disc that helps dampen and quiet the initial clutch engagement, plus a strap driven floater plate eliminates any floater plate rattle concerns. They make excellent choices for LS/LT and Coyote engine swaps, as well as Tremec transmission swaps. So, for an outstanding driving experience, choose a RAM Concept 9.5 clutch kit with flywheel designed for your vehicle's needs. Features and benefits: * A higher clamp-load 2,000 lb. static pressure plate with easy pedal effort * Precision machined billet stand segments to provide a stable mounting platform--no flimsy stamped steel mounting provisions * Precision mounting hardware properly centers the segments to the flywheel for proper balance and vibration-free driving comfort * Strap driven floater plate system assures a quiet, no rattle operation at any rpm * Sprung hub top disc, solid hub bottom disc arrangement helps dampen initial engagement and ease stress on the driveline * Nesting clutch disc hub design provides more spline engagement area on the input shaft and helps spread out the load more evenly to avoid input spline damage * Each unit is preassembled by hand in-house, ensuring the appropriate floater plate gap is achieved for trouble-free installation and performance * Available with either: -- 300 Series organic friction material for applications up to about 650 hp -- 900 Series metallic friction material for use up to about 800 hp
Not Yet Reviewed
$1,150.00
—
$1,700.00
Special Offer
If you have 1993-1997 Camaro or Firebird and are tired of using the factory pull-style clutch system, RAM Clutches has the solution for you with their single disc push-type conversion Camaro/Firebird clutch kits. Each kit comes with the necessary components to convert your car from "pull-style" to the more conventional "push-style" actuation. The kits come in a choice of either a steel or aluminum flywheel in either a one-piece or two-piece seal configurations, depending on your application. Clutch kit sold separately.
Not Yet Reviewed
$1,099.00
—
$1,427.00
Special Offer
RAM has developed these dual disc push-type conversion C4 Corvette clutch kits to replace the factory pull-style unit with a conventional single or dual disc push-style package. Each conversion kit comes with the necessary components to convert your car from "pull-style" to the more conventional "push-style" actuation. You have the choice of either a steel or aluminum flywheel in either a one-piece or two-piece seal configurations. So, if you are tired of using the factory pull-style clutch system in your C4 Corvette, these dual disc push-type conversion clutch kits from RAM can provide a viable solution. Order the RAM conversion clutch kit for your application needs.
Not Yet Reviewed
$1,375.00
—
$1,700.00
Special Offer
RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.
( 1 )
$1,899.00
—
$2,159.00
Special Offer
If you have 1993-1997 Camaro or Firebird and are tired of using the factory pull-style clutch system, RAM Clutches has the solution for you with their dual disc push-type conversion Camaro/Firebird clutch kits. Each kit comes with the necessary components to convert your car from "pull-style" to the more conventional "push-style" actuation. These kits are offered in a choice of either a steel or aluminum flywheel in either a one-piece or two-piece seal configurations, depending on your application. Clutch kit sold separately.
Not Yet Reviewed
$1,375.00
—
$1,700.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
