Availability
Showing In Stock Items. Show All 46 Items.
On Sale
AFR's 335cc BBC Enforcer cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 509 to 540 cu.in. operating below 6,500 rpm. They come fully assembled with the identical components found in AFR's higher end CNC-ported cylinder heads—such as ARP rockers studs, PAC Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks (not stamped), hardened spring seats, and AFR's one-piece 8mm 21 4N stainless steel valves. Order the cylinder heads recommended for your year/make and engine application.
( 5 )
$1,023.75
$921.38
On Sale
Shutting down your vehicle's fuel-saving cylinder deactivation system has its advantages. If your AFM lifters are failing or if you're doing performance upgrades, Summit Racing™ offers cylinder deactivation delete combo Pro Packs that will allow your vehicle to run on all cylinders and have full power at all times. Select the kit designed for your vehicle. Cylinder deactivation delete Pro Packs include: * ICT Billet LT lifter valley covers * Summit™ Performance LS7 hydraulic lifters * Summit™ lifter guides * BTR Gen V LT VVT cam timing bolts * ACDelco crankshaft front seal * ACDelco water pump gaskets * Mahle head gasket set * Fel-Pro head bolts * ACDelco harmonic balancer bolts
Not Yet Reviewed
$777.89
—
$880.89
$762.89
—
$865.89
On Sale
Now available from Holley are LS engine swap accessory drive systems. Included are accessories and pulleys that are manufactured by OEM part suppliers for durability and direct bolt-on installation. Order the kit that's best suited for your vehicle and engine application. Features and facts: * Universal brackets fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets--thus reducing cost and complexity compared with competitive products * Simple, dedicated installation kits allow easy fitment to Corvette, F-Body, or truck drive offsets * Accessories, tensioner, and pulleys are manufactured by OEM suppliers and many of the parts are used on production vehicles today
( 34 )
$849.95
—
$949.95
$763.95
—
$853.95
On Sale
Manley Pro Series crankshafts can make your short block bulletproof. They feature forged 4340 construction and undergo a multi-step heat-treatment process and are then nitrided for added strength. The crankshafts are stress-relieved, shot-peened, and magnafluxed. Manley Pro Series crankshafts have micro-polished large .125 in. radius journals, gun-drilled mains, and lightened rod journals for weight reduction. The counterweights are fully profiled and they are designed for internal balancing.
( 11 )
$873.46
—
$1,042.34
$829.79
—
$990.22
On Sale
Summit Racing™ forged crankshafts offer maximum strength and the best value for your dollar! Our crankshafts are non-twist forged from certified 4340 steel. They are put through several stages of heat-treatment, and then stress-relieved and shot-peened to provide the strength and reliability you demand for your high performance application. Each journal is micro-polished and a .125 in. radius is used for increased strength. Summit Racing™ forged crankshafts help you get the most in value and performance.
( 10 )
$889.99
—
$1,029.99
$849.99
—
$949.99
On Sale
RaceTec's AutoTec line of forged pistons offers high-quality, precision manufactured options at competitive pricing. The primary material used for AutoTec pistons is 4032 high-silicone aluminum alloy which is extremely durable, has great wear resistance, a low expansion rate, and is very low in friction. The most common applications for AutoTec pistons include muscle car restorations, performance street rods, as well as many spec racing classes. They can also withstand mild nitrous kits, small turbos, or superchargers. A large selection of sizes and styles is available. Choose the proper fit for your application build. Additional features for most pistons in the AutoTec line: * CNC Precision machined ring grooves * Top ring land gas distribution groove to enhance performance and improve ring seal * Wrist pins, pin fitting, wire locks, broached pin oilers, and accumulator groove are included * Diamond turned skirts
( 1 )
$837.00
$753.30
On Sale
RaceTec pistons are the highest quality, precision manufactured options available made from forged or billet 2618 aluminum alloy. Utilizing the latest in CAD software and modern CNC machining centers, it is extremely durable and perfect for your high-horsepower application. RaceTec's in-house design and dyno-proven forgings ensure the strongest and lightest piston for your requirements. They offer a long list of sizes and styles. Choose the proper fit for your build. Features for most RaceTec pistons: * CNC Precision used in every manufacturing operation * Valve pockets machined for oversized valves and high lift cams * Critically machined ring grooves * Top ring land gas distribution grooves to enhance performance and improve ring seal * Wrist pins, pin fit, wire locks, broached double pin oilers, and accumulator groove are included * Diamond tooling used throughout production, including ring grooves and skirts
Not Yet Reviewed
$1,053.00
$947.70
On Sale
JE Pistons 350/400 small block dome top pistons are high-compression pistons that are compatible with most aftermarket 23 degree heads and are ideal for drag race and Circle Track applications. Valve reliefs will accommodate oversized valves and long-duration, tight lobe separation cams. Precision CNC ring grooves are designed for 1/16, 1/16, 3/16 rings. However, these will not fit JE Pistons Pro Topline or Brodix cylinder heads.
( 1 )
$974.99
—
$1,024.99
$877.49
—
$922.49
On Sale
JE Pistons extreme duty 23 degree inverted dome top pistons are specially designed for forced induction and nitrous applications. These pistons include 3.10 in. pocket depths and precision CNC-machined ring grooves. They accept 1/16, 1/16, 3/16 rings.
( 1 )
$1,024.99
$922.49
On Sale
JE Pistons big block nitrous series dome top pistons have ring lands designed for nitrous applications. Valve reliefs are designed to accept oversized valves and long-duration, wide-lobe separation camshafts, and they are also compatible with angle milled heads. Precision CNC-machined grooves accept 1/16, 1/16, 3/16 rings. They fit open chamber cylinder heads.
Not Yet Reviewed
$1,024.99
—
$1,099.99
$922.49
—
$989.99
On Sale
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 102 )
$1,599.95
$879.95
On Sale
BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection * Upgraded ARP 625+ bolts (260,000 to 280,000 psi) available
( 1 )
$1,099.99
$989.99
On Sale
JE Pistons Brodix -12 15 degree dome top pistons are designed to work with most of the new 15 degree chamber designs. The race-proven hollow dome forging by JE Pistons is the newest design for Sprint Car applications. These pistons have deep valve reliefs to accommodate oversized valves and long-duration, tight lobe separation cams. They accept 1/16, 1/16, 3/16 rings. These pistons utilize hollow dome dedicated left and right hand forgings.
Not Yet Reviewed
$1,099.99
$989.99
On Sale
As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications, and their performance has been proven in victory lane time and time again. JE Pistons big block inverted dome top pistons are forged using 2618 aluminum, yielding high-tensile strength needed for high-demand performance applications, and they are designed specifically for each engine and use application to provide optimized performance durability. They feature JE Pistons' proprietary Forged Side Relief (FSR) forging design to minimize friction and power loss with reduced skirt width and save additional weight with a shorter wrist pin. Their precision CNC-machined ring grooves accept 1/16, 1/16, 3/16 in. rings (not included). JE big block inverted dome top pistons are available in different size specs, and can be ordered individually or in larger sets.
( 1 )
$1,024.99
$922.49
On Sale
JE Pistons Tour series gas ported pistons have undergone engineering changes to handle higher horsepower 4-barrel applications (approximately 650 hp) and angle-milled heads. Both the 350 and 400 Series accept oversize valves (the intake pocket is 2.255 in. and the exhaust pocket is 1.870 in.) and long-duration, tight lobe separation cams. Ring grooves are precision-machined for .043, .043, 3.0mm backcut rings with lateral gas ports for a superior ring seal.
Not Yet Reviewed
$1,024.99
$922.49
On Sale
These big block flat top pistons by JE Pistons are compatible with forced induction, nitrous, and angle-milled heads. Valve reliefs will accommodate oversized valves and long-duration, tight lobe separation cams. Their compression height is figured using a 9.780 in. block height with zero deck clearance. Precision CNC-machined ring grooves accept 1/16, 1/16, 3/16 rings. These pistons will fit both open and closed chamber cylinder heads.
( 3 )
$1,024.99
$922.49
On Sale
JE Pistons big block open chamber dome top pistons are an excellent choice for drag race applications. Their compression height is figured using a 9.780 in. block height with zero deck clearance. The pistons include a pin, double Spiro locks, and double pin oilers. Their precision CNC-machined ring grooves will accept 1/16, 1/16, 3/16 rings.
( 4 )
$1,024.99
$922.49
On Sale
JE Pistons 400 small block 18 degree dome pistons feature a new dome profile to match a wider variety of 18 degree heads. They're designed to fit your high-compression, high-horsepower, 17/18 degree dirt late model engine. They have smooth flowing domes for optimum flame travel and angle milled head compatibility. New valve reliefs will accommodate larger valves and long-duration, tight lobe separation cams. These pistons utilize dedicated left and right hand forgings and accept 1/16, 1/16, 3/16 rings.
Not Yet Reviewed
$974.99
—
$1,099.99
$877.49
—
$989.99
On Sale
These classic, race-winning 350/400 standard flat top JE Pistons work with most aftermarket 23 degree heads. They have extra-deep valve pockets and a low-friction skirt design. They are to be used with 1/16, 1/16, 3/16 or 1/16, 1/16, 3.0mm rings.
Not Yet Reviewed
$924.99
—
$1,024.99
$832.49
—
$922.49
On Sale
Manley Platinum Series pistons are designed to provide trouble-free installation, excellent reliability, and maximum horsepower for your application. Available in 2618 and 4032 forgings, they provide the optimum balance between strength and weight, with no grain-interrupting internal milling. The Platinum Series pistons' 2618 alloy offers maximum high-temperature strength and fatigue resistance, while the 4032 alloy is ideal for moderate-horsepower street applications. Order the style and size pistons designed for your vehicle and engine.
( 6 )
$791.94
—
$1,080.83
$752.34
—
$1,026.79
On Sale
Manley takes their H-Lite Series connecting rods seriously. Manufactured from 4340 forgings, the rods are heat-treated, stress-relieved, shot-peened, and 100 percent magnafluxed. These lightweight versions feature premium 3/8 in. ARP 2000 cap fasteners. They offer exacting tolerances, high-quality standards, and pricing that's hard to beat. All H-beams are not the same; ensure a successful build with Manley Performance steel H-Lite connecting rods—available for applications spanning a half-century.
Not Yet Reviewed
$843.91
$801.71
On Sale
JE Pistons open chamber dome top gas ported pistons are the top choice for drag race applications. These pistons have vertical gas ports, backcut top and D wall second rings (.043, .043, 3.0mm), and a low-tension oil ring. Their compression height is figured using a 9.780 in. block height with zero deck clearance. They include a pin and double Spiro locks.
Not Yet Reviewed
$1,199.99
$1,079.99
On Sale
JE Pistons Big Duke/Big Chief/Big Victor GP 18 degree pistons feature a race-proven dome and skirt design and are specifically designed for the Big Duke/Big Chief cylinder heads. The valve reliefs have been designed to accept oversized valves and long-duration, tight lobe separation roller cams. Their precision CNC-machined ring grooves accept .043 D-wall, 1/16, and 3/16 rings.
Not Yet Reviewed
$1,199.99
$1,079.99
On Sale
JE Pistons Big Block Chevy Blown Alcohol Series pistons are perfect for high-boost blown alcohol drag racing! These forged aluminum pistons feature precision CNC-machined ring grooves, valve reliefs for oversized valves, and compatibility with angle milled heads. They include pins, double Spiro locks, double pin oilers, and accumulator grooves. The pistons may be used with buttons (sold separately) if you prefer, in place of Spiro locks. Choose the right pistons to handle your blown setup--JE Pistons Big Block Chevy Blown Alcohol Series pistons.
Not Yet Reviewed
$1,199.99
$1,079.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
