Availability
Showing In Stock Items. Show All 105 Items.
On Sale
For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street headers are available uncoated or in Black Maxx or their polished HTC thermal ceramic coated finishes and, as an added bonus, they also come with all necessary gaskets and mounting hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 2458 )
$279.99
—
$564.99
$251.99
—
$508.49
On Sale
MBRP's PLM Series exhaust systems feature a muffler delete pipe that takes the place of your muffler, providing the ultimate in exhaust flow and sound. By doing so, they increase both horsepower and torque and improve fuel economy. The systems are manufactured from heavy-duty steel pipe with an aluminized coating for maximum protection. Their specially designed 2-piece tailpipe and bolt-on hangers allow for a simple, straightforward installation. These PLM Series exhausts are available in a variety of sizes, styles, and configurations for fitment on specific vehicle applications.
( 35 )
$459.99
$367.99
On Sale
Hooker exhaust manifolds offer improved flow. They feature cast iron construction with 2.5 in. diameter outlets and have been designed to hug close to the engine block so they fit into a wide variety of replacement and engine-swap applications. Their contoured design aims the exhaust directly at the exit port for improved flow. Hooker exhaust manifolds will provide years of leak-free performance with less underhood noise than traditional headers. Plus, their shorty design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance. Features include: * Intended for engine swap applications where durability, quiet operation, and leak-free sealing is desired * Available in plain as-cast finish or with various Hooker ceramic coatings for reduced engine compartment temperatures and improved corrosion resistance * Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included * Cast from high-silicon-moly ductile iron to provide durability and corrosion resistance * 2.5 in. outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold *Tight tuck design provides universal fit for most popular chassis and a clean, traditional muscle car appearance
( 32 )
$301.95
—
$499.95
$271.75
—
$448.95
On Sale
Doug's Headers Y-pipe kits help to balance exhaust pressure, resulting in increased low-rpm power. These kits include all of the necessary parts and pieces to connect Doug's headers to the factory or aftermarket catalytic converter.
( 34 )
$307.15
$276.44
On Sale
Flowtech shorty headers are just the ticket for those who want the best of both worlds--top performance and a clean machine. They bolt on to your OEM exhaust system, offering real horsepower gains plus increased efficiency. These headers are made from durable 16-gauge tubing; feature TIG-welded, extra-thick 3/8 in. flanges for a leak-free seal, and come complete with premium gaskets and hardware. Plus, Flowtech Shorty headers are available in high heat-resistant black paint, ceramic thermal barrier coating or natural stainless finishes for improved rust and corrosion resistance. Additional features: * Designed as a direct fit replacement for OEM exhaust manifolds * High-flow, mandrel-bent tubes provide consistent tubing diameters for smooth flow and increased exhaust velocity Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Flowtech recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 87 )
$340.95
—
$449.95
$306.85
—
$403.95
On Sale
Hooker Competition headers are designed for stock or mildly modified engines for the value-conscious buyer. Made from durable 16-gauge steel, Competition headers feature 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 945 )
$299.95
—
$949.95
$250.95
—
$522.95
On Sale
Flowtech LS turbo headers improve smooth-flow engine breathing and increase cylinder scavenging effect by providing consistent tubing diameters. Constructed of heavy-duty, 16-gauge stainless steel, they're available in natural, black painted, and ceramic coated finishes. These headers offer 1 3/4 and 1 7/8 in. tubing diameters for increased exhaust flow, increased performance, and improved throttle response. A 3 in. collector provides additional strength and durability.
( 27 )
$290.95
—
$389.95
$261.85
—
$350.95
On Sale
Doug's Headers side tubes complete your side exhaust with racy looks. Corvettes are known for being fast, and side pipes and tubes create a fast look that is natural and clean! Doug's 4 in. side tubes bolt to existing holes in your Corvette rocker panel and clamp to either their big block or small block side exhaust headers for a leak-free seal. And, they're available in your choice of metallic ceramic, black, or chrome finishes. Side pipes belong on Corvettes; finish the perfect look with Doug's Headers side tubes.
( 39 )
$346.40
—
$557.00
$311.76
—
$501.30
On Sale
Increase your horsepower and torque with JBA Cat4ward headers! They are designed with 3/8 in. thick laser-cut flanges, mandrel-bent primary tubes, and feature JBA's patented Firecone merge collectors. They're available in either steel or 409 stainless steel and are offered in a chrome plated or high-temperature silver ceramic finish for most applications. JBA includes premium-quality mounting hardware and instructions for the installation and, unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This would include components such as cylinder heads, chassis, steering, motor mounts, body mounts, bushings, etc. If aftermarket components, parts from other applications, or custom-altered parts are used on your vehicle, it is the installer's responsibility to verify fitment.
( 497 )
$433.40
—
$588.30
$390.06
—
$529.47
On Sale
Doug's Headers Corvette side pipe mufflers afford you the option of choosing your desired power and sound! Three different side pipe muffler inserts are offered. Doug's maximum flow mufflers provide the most power; reverse flow mufflers are quieter; and glasspack mufflers balance power and throaty sound. Whether your concern is sound control or maximum power, Doug's choice of Corvette side pipe mufflers will match your desires.
( 37 )
$325.15
$292.64
On Sale
Install an LS powerplant under the hood of your classic car or truck using a set of Hooker LS engine swap headers. They feature mild steel construction and are available painted, or ceramic coated in silver or black. Hooker headers' unique design will optimize the performance of your LS engine.
( 11 )
$349.95
—
$549.95
$314.95
—
$493.95
On Sale
Hot rodding has always been about taking two or more parts that were never designed to work together and make then work together seamlessly. It is a never-ending effort to shove as much horsepower and torque under a vehicle's hood as possible. Unfortunately, any project can come to a screeching halt when it comes to bolting up a set of headers. Hedman Hot Rodz engine swap headers are specifically designed for non-factory engine and vehicle model combinations. Available in mild steel or stainless with 16-gauge header tubes uncoated and coated. The HTC silver and Black Maxx ceramic-metallic coatings offer superior heat insulation and anti-corrosion properties to protect your "Hedder" investment and retain more heat inside the header tubes for increased exhaust velocity and improved scavenging.
( 70 )
$302.99
—
$599.99
$272.69
—
$539.99
On Sale
Headers are widely believed to be one of the best performance values available today--so why put stock manifolds on your trick ride? After dropping a different engine into your project vehicle, help it produce more horsepower and fuel economy with these specialty and engine swap headers from Hedman. They feature durable 18-gauge steel construction and have thick 1/4 in. flanges for a long-lasting, leak-proof seal. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 184 )
$306.99
—
$482.99
$276.29
—
$434.69
On Sale
MBRP Performance Series exhaust systems maximize exhaust flow and minimize exhaust temperatures. They're manufactured from 100 percent aluminized steel and come standard with MBRP's smaller muffler. Fully sealed tubing adds years to your system, avoiding rust-through on seams. Performance Series units are road, track, and dyno-tested; and they're specially tuned to deliver an aggressive exhaust note. Order the model designed for your specific vehicle. Other features and benefits: * Fully mandrel-bent tubing and minimal bend degree angles increase airflow * Better gas mileage * Bolt-on, no-weld design for easy installation * Direct-fit to the OEM hangers; clamps and accessories included * Available for gas truck and diesel applications * Limited one-year workmanship warranty
( 45 )
$344.99
—
$514.99
$275.99
—
$411.99
On Sale
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 545 )
$529.95
—
$774.95
$475.95
—
$520.95
On Sale
Hooker Blackheart LS swap headers are constructed from mandrel-bent, 18-gauge 304 stainless steel. The headers are available with 1 3/4 in. or 1 7/8 in. primary tubes and 3 in. collectors—and tube geometry is designed for maximum clearance and hassle-free installation. Swap out that old iron and upgrade your overall performance with the Hooker Blackheart LS swap headers. Depending on application, features may include: * Lightweight 18-gauge, 304 stainless steel construction for good looks, maximum strength, and superior corrosion resistance * 1 3/4 in. primary tube diameter and 3 in. collector model is ideal for "hot" LS1/LS6/LS2/LS3/LS7 or 5.3L-6.0L engine swaps * Long-tube header design allows engine to breathe more freely, resulting in more mid-range and top-end power gains * 3/8 in. thick, CNC waterjet header flanges are used for strength and maximum sealing surface * All hardware included * Hooker Headers limited lifetime warranty
( 4 )
$433.95
—
$549.95
$389.95
—
$493.95
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 991 )
$278.95
—
$649.95
$251.05
—
$493.95
On Sale
Patriot Clippster headers feature longer primaries that exit toward the rear of the engine compartment to clear steering and suspension components. They have slightly shorter primaries than full length headers and provide ground clearance on lowered vehicles. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes. * Raw steel is available for individual customizing
( 322 )
$288.05
—
$583.50
$259.24
—
$525.15
On Sale
These Hooker LS cast iron exhaust manifolds have been designed to hug close to the engine block so they fit into a wide variety of replacement engine swap applications. Their contoured design aims the exhaust directly at the exit port for greatly improved flow. They are cast from high silicon moly ductile iron to provide durability, leak free performance and less under the hood noise than conventional headers. The Hooker LS cast iron exhaust manifolds are recommended for strong performance on engines up to 500 horsepower and are available in plain as cast finish or with Hooker ceramic coatings for reduced engine temperatures and improved corrosion resistance. They also feature 304 stainless steel mating flanges to help provide a leak-free installation, and a two bolt exit flange which can be used with OEM style gaskets and fasteners for an excellent seal.
( 38 )
$479.95
$430.95
On Sale
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 704 )
$425.45
—
$590.40
$382.90
—
$531.36
On Sale
JBA Performance Exhaust Y-pipes are engineered and manufactured to complement JBA's 50-state legal Cat4ward headers. They're made from quality mandrel-bent tubing for good fit and durability. Plus, they're designed for an easy bolt-on installation, so you won't have a hassle getting them mounted. Hardware is included.
( 27 )
$318.80
—
$358.05
$286.92
—
$322.24
On Sale
Hooker RacingHeart Street Stock headers are for street cars with a small block Chevy engine. They fit various GM A/G and F-body vehicles and offer 3/8 in. thick flanges to offer maximum sealant surface and prevent warping. The headers are available in stainless steel or mild steel, as well as diameter and port shape options. Choose the Hooker RacingHeart Street Stock headers recommended for your vehicle. Additional features: • Collectors feature merge spears for increased exhaust velocity • Fits both straight and angle plug heads • Requires short oil filter
( 25 )
$299.95
—
$337.95
$269.95
—
$304.15
On Sale
Maximize your exhaust flow and reduce back pressure. Hooker Competition header-back exhaust systems feature large-diameter, 16-gauge steel tubing for improved efficiency, less backpressure, and longer life. Each system is mandrel-bent to maintain a consistent inside diameter for maximum flow. All systems come without mufflers.
( 129 )
$319.95
—
$325.95
$287.95
—
$293.35
On Sale
Flowmaster Force II exhaust systems are engineered with the latest technology for improvements in acceleration, passing power, and fuel mileage. The key to these performance enhancements is the use of mandrel-bent tubing. Force II assemblies are available in dozens of muffler and pipe configurations for fitment on thousands of year/make/model cars and trucks. Choose the size and style that's compatible with your engine type.
( 230 )
$549.95
—
$578.95
$493.95
—
$520.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
