Availability
Manufacturer Rebate
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 253 )
$272.10
—
$383.00
Manufacturer Rebate
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 692 )
$542.65
—
$1,747.95
Manufacturer Rebate
Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included
( 18 )
$702.35
—
$1,747.95
Manufacturer Rebate
PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor II® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing, and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 346 )
$383.00
—
$464.15
Manufacturer Rebate
Increase your horsepower and torque with JBA Cat4ward headers! They are designed with 3/8 in. thick laser-cut flanges, mandrel-bent primary tubes, and feature JBA's patented Firecone merge collectors. They're available in either steel or 409 stainless steel and are offered in a chrome plated or high-temperature silver ceramic finish for most applications. JBA includes premium-quality mounting hardware and instructions for the installation and, unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This would include components such as cylinder heads, chassis, steering, motor mounts, body mounts, bushings, etc. If aftermarket components, parts from other applications, or custom-altered parts are used on your vehicle, it is the installer's responsibility to verify fitment.
( 539 )
$433.40
—
$1,096.45
Manufacturer Rebate
MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Welding, cutting, and tube-bending equipment are not required. These cats feature a ribbed body that minimizes expansion and distortion when the converters heat up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases, and they hold the ceramic catalyst in proper alignment. MagnaFlow converters use a monolithic honeycomb catalyst; the ceramic coating is designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specifications. Improper coating could result in flow restrictions or an emissions test failure. These converters are designed to exact OE specifications and are available for the most popular vehicle makes and models.
( 439 )
$143.00
—
$3,091.00
Manufacturer Rebate
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L65E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 500 lb.-ft. of torque * Stall: 2,600 to 3,200 * High performance 12 in. furnace-brazed converter -- Flanged hub and carbon fiber clutch * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 13-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Bushing kit * New thrust washers * Complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * Corvette servo * Carbon fiber wide 2-4 band * New valve body spacer plate * Fill tube and stick * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New internal wiring harness with new TCC solenoid * New electronic speed sensor * Transmission mount * New OE steel transmission pan
Not Yet Reviewed
$4,945.00
—
$5,645.00
Manufacturer Rebate
MagnaFlow diesel converters are specially formulated to control diesel exhaust. They are constructed with a ribbed body that minimizes expansion and distortion when the converter heats up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases and holds the ceramic catalyst in proper alignment. They are seam-welded close to the converter body for a strong, tight bond, and they use a monolithic honeycomb catalyst. They are designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specs and eliminate flow restrictions.
( 3 )
$480.00
—
$855.00
Manufacturer Rebate
MagnaFlow universal spun catalytic converters utilize the revolutionary new catalyst technology. Using new manufacturing technology, they fabricate each converter body from a single CNC-formed and laser-welded tubular section, which is then spun into a round converter body shape. The MagnaFlow universal spun catalytic converters are literally manufactured around the catalyst, which is securely tucked inside and necks down to thicker gauge material at the inlet/outlet for maximum durability. They are available in different diameter inlets and outlets to match your specific exhaust system. Whether you need centered, offset, or angled converters, MagnaFlow universal spun catalytic converters will fit any application.
( 78 )
$92.00
—
$220.00
Manufacturer Rebate
Aeromotive Gen II Stealth fuel tanks utilize patented and award-winning Phantom technology. This enables a quiet, high-flow EFI pump and baffle to maintain ample fuel supply around the inlet of the pump—which, in turn, ensures consistent fuel delivery and drivability even in low fuel conditions. The tanks feature outlet and return ports, along with electrical terminals positioned in the OEM location. This design enables flush installation to the vehicle floor and will not require strap modification or spacers. All Gen II Stealth tanks come out of the box completely assembled. The fuel pump, fuel level sending unit, and fuel/electrical bulkhead are pre-installed. As a true plug-and-play assembly, an Aeromotive Gen II Stealth tank will get you out of the garage and on the road in no time. Order the model recommended for fitment on your vehicle.
( 65 )
$624.90
—
$1,280.95
Manufacturer Rebate
PerTronix Flame-Thrower billet plug and play marine distributors feature the Ignitor II® electronic ignition module, a billet CNC-machined housing, an upper roller bearing, and a self-lubricating, oil-impregnated copper powder metal lower bushing. They are compatible with any inductive ignition system coil and come with a factory-preset performance curve, a mechanical advance limiting adjustment, and a small-diameter, high-dielectric strength cap and rotor.
( 78 )
$414.80
—
$459.40
Manufacturer Rebate
PerTronix Flame-Thrower plug and play billet distributors with Ignitor III® module offer the latest version of Pertronix's ignition modules. They include the patented Ignitor III® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. The Ignitor III® features adaptive dwell, which maintains peak energy throughout the entire rpm range, reduces misfires and improves engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup and increased coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay and increase energy for quicker, easier starting by sensing startup. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor III® module have an integrated digital rev limiter with LED feedback for precise RPM setting and a memory safe function that stores settings eliminating unintended changes to the rev limit.
( 135 )
$433.40
—
$526.25
Manufacturer Rebate
MagnaFlow OEM Grade Federal/EPA Compliant direct-fit catalytic converters provide your vehicle with high-emission compliance, the latest technology, and premium-grade components. Along with those benefits, you also get their industry-leading warranties, so you can drive with confidence. MagnaFlow converters are designed to the exact original equipment specifications, while being engineered to keep the "Check Engine Light" off. Features include: * Stainless steel construction * CNC-precision robotic manufacturing * Meets or exceeds EPA emissions requirements * Hassle-free, OE-like fitment tailored to your specific application * Limited 5-year/50,000 mile warranty on construction * Limited 25,000 mile warranty on emissions
( 13 )
$336.00
—
$2,576.00
Manufacturer Rebate
MagnaFlow universal catalytic converters by Car Sound form the basic building blocks for many applications. The main benefit of universal catalytic converters is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting, and tube-bending equipment that is readily available to most professional installers. They are extremely well made, with features such as: * A ribbed body that minimizes expansion and distortion when the converter heats up. They form a channel that protects the cushioning mat from direct exposure to exhaust gasses, and hold the ceramic catalyst in proper alignment. * A 1/2 in. lap joint where the necks meet the body. The neck does not extend into the converter body, where it could hamper exhaust flow. * Manufactured with separate dies on different sized inlets. Putting larger neck sizes on smaller bodies would reduce the flow of the converter and the quality of the product. * A monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. * Seam-welded close to the converter body for a strong, tight bond. Welding along the edge could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around. * Heavier-gauge stainless steel, tip-to-tip. They do not use inferior mixed weights and materials. * An aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter.
( 184 )
$97.00
—
$1,407.00
Manufacturer Rebate
MagnaFlow's California Universal Fit 30000 catalytic converters are the first series of a new line of converters designed for vehicles with second-generation On-Board Diagnostic (OBDII) systems. They are designed, tested, and catalogued for specific vehicles. Unlike traditional universal converters, these converters exceed strict California requirements for conversion efficiency and durability.
( 13 )
$202.00
—
$480.00
Manufacturer Rebate
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L60E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 500 lb.-ft. of torque * Raybestos Stage 1 frictions and steels * TransGo heavy-duty reprogramming kit with Shift Command * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 10-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Bushing kit * New thrust washers * Complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * Corvette servo * High-energy wide bands * New valve body spacer plate * Fill tube and stick * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New internal wiring harness with new TCC solenoid * New electronic speed sensor * Inspection cover (chrome) * Transmission mount * New OE steel transmission pan
Not Yet Reviewed
$4,945.00
—
$5,645.00
Manufacturer Rebate
MagnaFlow California Grade CARB Compliant universal catalytic converters help keep the check engine light off. They offer the right fit for a wide array of vehicles thanks to the adaptable universal design (cutting and welding is required). With highly corrosion-resistant, stainless steel construction, you can have confidence in the quality of these catalytic converters. They are designed to meet or exceed California Air Resource Board requirements and have undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states.
( 2 )
$480.00
—
$1,710.00
Manufacturer Rebate
Westin's grate steps running boards are engineered to provide maximum traction without having to sacrifice on style. The step surface width features an aggressive punch tread design allowing traction in any weather condition. The unique serrated edges help clean snow, dirt, and mud off your boots to keep your truck cab clean. These running boards are stylishly formed with fully welded edges and a custom diecast riveted logo badge. They are available in universal lengths 54 in., 68 in., 75 in., 79 in., 83 in., 86 in. and 90 in. and require a vehicle-specific mount kit for installation (sold separately). Order the model to fit your application. Additional features: * Solid 1-piece steel construction * E-coated base coat for long-lasting corrosion protection against the elements * Attractive textured black finish * Ideal for construction, commercial, vans and utility use
( 1 )
$204.99
—
$525.99
Manufacturer Rebate
MagnaFlow California Grade CARB Compliant direct-fit catalytic converters comply with California Air Resources Board (CARB) emissions regulations, which require more precious metals and rigorous testing, plus the direct-fit means an easier bolt-on install for you. Choose the perfect fit for your vehicle. Features include: * Stainless steel construction * CNC-precision robotic manufacturing * Limited 5-year/50,000 mile warranty
( 3 )
$515.00
—
$5,457.00
Manufacturer Rebate
GearStar GM 4L70E Level 3 transmissions come with a custom billet Yank Performance torque converter. This is the first of many upgrades that go into making sure that each transmission is not only built for performance applications to handle up to 500 crank horsepower or 500 crank foot-pounds of torque. These transmissions feature a 15-pin main harness connector that's designed for factory GM applications from 2008+ or other standalone transmission controllers that utilize the input shaft speed sensor. They come with Raybestos Stage 1 frictions, hardened sun shell, expanded capacity input drum with reinforcing sleeve, and a Transgo valve body reprogramming shift kit with shift command. These units come with all new electrics, including the wiring harness, all sensors and solenoids—along with all new bushings, bearings, and seals. Every transmission is assembled by one of GearStar's five expert builders. The transmission packages arrive dyno tested with 100 miles already on the product, which means the break-in procedure has been done and they're ready to go!
Not Yet Reviewed
$5,145.00
—
$5,845.00
Manufacturer Rebate
Westin Sure-Grip running boards are designed to give your vehicle a stylish look, while providing easier entrance into the passenger area. They are made of extruded aluminum available with a chrome, clear anodized, or black powdercoated finish. The boards use a 4.5 in. wide rubberized step pad for secure footing and have molded polymer end caps. They require the use of a vehicle-specific mounting kit, which is sold separately.
( 29 )
$249.99
—
$517.99
Manufacturer Rebate
JBA Performance Exhaust competition-ready long tube headers are the number-one choice for maximum performance gains and high rpm efficiency. Their designs are dyno and race-proven to deliver the greatest possible increase in horsepower and torque throughout the rpm range. All JBA long tube headers feature large mandrel-bent stainless steel primary tubes, oversized exhaust ports, extra-thick 3/8 in. one-piece flanges, and patented merged collectors for smooth flow. Each system is designed to give the maximum amount of ground clearance possible so that lowered cars do not drag the collectors. And, in addition, each JBA system includes high-quality hardware and thorough instructions to provide a professional, no-leak installation.
( 96 )
$847.70
—
$1,294.40
Manufacturer Rebate
Aeromotive electric water pumps are offered for a variety of applications, including many Chrysler, Dodge, GM, and Ford vehicles. These high performance pumps are constructed of lightweight billet aluminum with a black anodized finish. With dependable, long-lasting electric motors and mechanical seal. These water pumps will meet your cooling needs.
Not Yet Reviewed
$552.20
—
$752.75
Manufacturer Rebate
Westin Pro Traxx 4 oval tube nerf step bars feature a heavy-duty step pad that provides a wider, more secure step area. They also feature deep paved waterways to keep the step area dry and full textured step areas are great for scraping mud off of your shoes, which means a cleaner interior. Made with fully coated, seamless domed ends with 30 degree OE-style bends, these nerf step bars are available in various lengths and diameters, in your choice of polished stainless steel or black powdercoated steel. Mounting kit is included for an easy bolt-on installation, no drilling required. For durability, functionality, and great looks, Westin Pro Traxx 4 oval tube nerf step bars can't be beat. Order the model designed for your specific truck application.
( 84 )
$236.99
—
$716.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
