Availability
Showing In Stock Items. Show All 16 Items.
Clearance
Summit Racing™ Pro BBC 4-7 Swap hydraulic roller camshafts are offered in a dozen versions to cover street/towing, street/strip, and drag race applications. Each cam features a 4/7 firing order, requiring the re-routing of spark plug wires for 1-8-7-3-6-5-4-2. Cam button, a melonized or composite distributor gear, and billet compatible fuel pump pushrod are required. Choose your level of performance. Additional features and notes: * Designed for beehive or lighter 1.4 to 1.500 dual springs * Designed in 12 steps, intake closing point is most important to operating rpm * Bigger cams with increased overlap REQUIRE more open and free-flowing exhaust for maximum mid- and high-rpm power * Cam advance is ground-in, so install dot-to-dot * Although the advance may seem larger than normal, it's designed for maximum power under the curve * Track testing is recommended before altering cam advance
( 1 )
$349.99
$299.50
Summit Bucks
Clearance
These H-beam connecting rods are the strongest Scat connecting rods available. These Scat H-beam connecting rods are perfect for supercharged and nitrous applications. These rods incorporate a special doweled cap for specific cap-to-rod alignment and are profiled with extra clearance for stroker applications.
( 41 )
$716.99
$408.50
Clearance
If you are serious about building the ultimate wet sump system, then these Melling one-piece billet aluminum oil pumps with their integral screen pickup are the only way to go. These pumps not only eliminate the potential disaster of the oil pump pickup falling off, but they also offer smoother oil flow with less internal drag, resulting in an actual increase of 5 to 6 hp. Melling Select billet aluminum oil pumps will fit in your existing Moroso, Milodon, and Stef's wet sump pans, there is no need to buy a new pan or to modify your old one. Melling Select billet aluminum oil pumps offer the absolute latest in cutting-edge technology. Additional features include: * Billet aluminum housing and cover with anodized hardcoat * Standard or high volume billet spur gears * Multiple pressure settings * Chromoly driveshaft extended into the pump cover for support * Integral pickup screen assembly with stainless steel wire mesh * Robust CNC-manufactured design * Chromoly intermediate shaft, optional pressure relief springs, and instructions
( 2 )
$598.99
$442.50
Clearance
KB Performance Hyper piston and ring kits are offered for a wide range of applications from street and towing to marine and race. The kits feature pistons cast from 390 hypereutectic alloy heat-treated to T-6 standards to make them stronger. The pistons also feature fully machined crowns and valve pockets. KB hypereutectic pistons come in several head designs, as well as standard and oversized bore sizes. All KB Hyper pistons are lightweight to improve throttle response and rpm changes, while still being strong enough to withstand high compression and high temperatures. KB Performance Hyper kits (KT) are completed with piston ring sets containing top rings of moly-coated cast iron (M) or ductile iron (D).
( 72 )
$424.99
—
$490.99
$315.50
—
$366.50
On Sale
Clearance
Waterman Racing complete belt drive kits include the bracket assembly, fuel pump pulley, crankshaft mandrel assembly with pulley, belt and hardware for installation. The kits are designed to mount a fuel pump on either the driver or passenger side on a Chevrolet small block or big block engine. Order the belt drive kit recommended to fit your application.
Not Yet Reviewed
$699.99
$397.50
—
$437.50
Clearance
Summit Racing™ Pro diesel camshafts are available for a variety of applications, including many Chevrolet Duramax V8 engines from 2001 to 2016. The solid roller style cams are offered in different models and options, such as all low-end power performance; mid-range; or top-end gains. Explore our Pro 1, Pro 2, and Pro 3 models, then select the grind and details that best suit your truck requirements.
Not Yet Reviewed
$699.99
$449.99
Clearance
Dove Manufacturing offers a variety of parts for high performance and racing equipment applications. These full roller aluminum rocker arms are available in different ratios and stud sizes (shaft mounting styles are also available). They're ideal replacements for a wide range of year/make and engine applications from the 1950s and up. Order the set (16) or kit recommended for your vehicle.
Not Yet Reviewed
$358.99
—
$541.99
$270.50
—
$379.50
Clearance
Mahle Original replacement pistons have the same great OE features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Choose the model designed for your vehicle and engine application.
( 7 )
$487.99
—
$614.99
$273.50
—
$355.50
Clearance
ICON FHR Series pistons for GM LS offer premium, custom options in an "off the shelf" option for your LS-family engine. FHR (Formed Head Relief) pistons have valve reliefs that are formed in as the piston blank is pressed into the die, creating a stock, but light forging. Many of the domed models are solid which allows tailoring the dome height for a specific compression ratio. They are constructed from high-strength, forged 4032 aluminum alloy for increased durability while maintaining tighter piston-to-wall clearance for increased cylinder sealing, lower cylinder wear, and stock-like noise levels, making them ideal for street and lightly boosted applications. ICON FHR pistons for GM LS also feature: * Mini grooves allow an overheated piston that contacts a cylinder wall to transfer heat to the wall. Friction is also reduced over a solid ring land. * Accumulator grooves provide a reservoir area for gases that pass by the top ring. Pressure is reduced between top and second ring to help stabilize flutter and maximize ring seal. * 0.030 in. offset wrist pins * Round wire locks * M42 skirt coating
( 6 )
$420.99
$328.50
Clearance
KB Performance hypereutectic pistons are made from 390 aluminum alloy and heat-treated to T6 standards, which makes them 30 percent stronger than ordinary untreated hypereutectics. Their 100 percent CNC-machined crowns, high upper compression-ring location, gas-accumulator groove, drilled oil returns, and spiral-lock retainer grooves make these pistons outstanding for performance applications. They have a lightweight, rigid-rib skirt design that stabilizes the piston in the bore. All of this adds up to pistons that fit tighter than forged types, provide improved oil control, reduce blow-by, increase ring life, eliminate cold start-up knocking, and won't cost you an arm and a leg! Thousands of models are available—find the set and options designed for your vehicle and engine application.
( 137 )
$364.99
—
$459.99
$284.50
—
$313.50
Clearance
Perfect for replacements or stock rebuilds, Melling stock replacement camshafts can restore your engine's true potential. They're available in a variety of styles, including hydraulic flat tappet, roller tappet, and roller follower; and mechanical flat tappet. Melling offers affordable, quality engine parts, including a full line of cams for cars, light trucks, and imports as far back as the mid-1950s. If you want quality that you can count on at a price that's hard to beat, order the Melling stock replacement camshaft designed for fitment on your vehicle.
( 18 )
$524.99
$376.50
Clearance
Get the most from your hard-earned dollars with Silv-O-Lite hypereutectic pistons. These pistons utilize aluminum alloy high in silicon for greater strength plus scuff and seizure resistance. Silv-O-Lite pistons have improved groove wear and resist cracking in the crown area where operating temperatures are severe. Silv-O-Lite hypereutectic pistons feature reinforced top lands and their proprietary process of diamond finished skirts. These aftermarket pistons are available for many applications from your light truck to your auto or import. Spend wisely and choose replacement pistons that will work hard for you--Silv-O-Lite hypereutectic pistons.
( 69 )
$338.99
$252.50
Clearance
Money is power, and the smart money is on KB Performance Claimer piston and ring kits. These kits offer quality and high performance for the power that you need, even when you're building on a budget. Claimer pistons mix a hypereutectic alloy displaying long wear characteristics and unique thermal properties with permanent mold casting processes to produce strong but lightweight pistons for optimal racing performance. Pistons are given an anti-friction coating and supplied with Tru-Arc lock rings so that you can run full floating or press fit. Informed decisions can pay big dividends; put your money on the solid performance of KB Performance Claimer piston and ring kits.
( 12 )
$317.99
$250.50
Clearance
Available in keyed and non-keyed styles, Isky lifter bore bushings are precision made from a special bronze alloy that lasts 2 to 4 times longer than most others. They also prevent excessive scuffing of roller lifter bodies. Isky keyed-style lifter bore bushings are for keyway roller lifters. Select the correct size for your engine and lifters.
Not Yet Reviewed
$605.99
$420.50
Clearance
You don't need a king's ransom to rule the track, thanks to ICON premium forged piston and ring kits. They deliver high-performance racing pistons crafted from high-strength, primary aluminum alloys and matching performance piston rings. The pistons feature fully machined heads and valve ports, advanced accumulator and mini groove technology, drilled pin holes, triple-wound spiral lock rings, and their proprietary diamond-finished skirts. ICON premium forged pistons can handle the pressure and abuse from the horsepower numbers that your engine produces. If you're ready to give up your kingdom to build more horsepower with a great set of pistons--think again! The ICON premium forged pistons and ring kit best suited for your application will help you reign victorious without spending a lot of cash.
( 18 )
$741.99
$378.50
Clearance
SRP big block Chevy flat top/inverted dome pistons are made from 4032 low-expansion, high-silicon aluminum alloy that is heat-treated to SRP specifications. Their ring land and crown thickness are specifically engineered for mild turbo, supercharged, and nitrous applications. They include a pin fitting, double Spiro locks, and a wall wrist pin. Their CNC-machined ring grooves accept 1/16, 1/16, 3/16 rings, which are sold separately. Pin upgrades are available.
Not Yet Reviewed
$699.99
$489.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
