Availability
Showing In Stock Items. Show All 212 Items.
Summit Racing™ induction kit Pro Packs start with the Edelbrock EPS Performer intake manifold, which builds horsepower and torque from idle to 5,500 rpm. Summit Racing™ induction kits also include an Edelbrock 600 cfm Performer carburetor and a 14 in. chrome steel Summit Racing™ air cleaner, plus zinc plated Summit Racing™ carb studs, a Summit Racing™ stainless steel intake bolt kit, and a Fel-Pro Printoseal intake manifold gasket set. These kits are compatible with both the 260 hp and 290 hp versions of this engine and are designed for smooth street performance.
( 23 )
$774.86
Radium Engineering fuel pump hangers permit the use of one, two, or three aftermarket pumps in the stock MK4 Toyota Supra (JZA80) fuel tank. Features include: * Drop-in OEM replacement * 8 AN male pump outlet * 6 AN male return inlet * Fuel starvation protection * High current electrical hardware * Compatible with various pumps (Walbro, AEM, etc.) * Anodized aluminum construction To simplifying aftermarket -AN hose plumbing, the 10 AN ORB threaded feed port features a low-profile 8 AN male fitting, and the 8 AN ORB threaded return port features a low-profile 6 AN male fitting. To reconnect the OEM return and vent hoses, 8.5mm barb fittings are also included. No permanent modification to the OEM fuel tank access cover is required. The custom designed stainless electrical studs easily handle the high current demand that compact bulkhead connectors lack. These serviceable connections are properly sealed and impervious to all standard and exotic fuels. The low-profile design keeps all wiring tucked nicely underneath the OEM fuel tank cover using the provided foam insulation. Nonconductive acorn nuts are provided to prevent any accidental short circuits. The high quality in-tank wiring is insulated with chemically resistant ETFE. Electrical hardware is included for the fuel pump(s), OEM level sender, and OEM temperature sensor. One issue with all Supra fuel pump hangers is the lack of fuel starvation protection. In these kits, the flow from the FPR return line powers a Radium jet pump. Using a venturi-effect, this "mechanical" pump draws fuel from outside the sub-tank and distributes it directly to the pump inlets.
( 1 )
$617.45
Wiring Specialties Pro Series LS1 Engine wiring harnesses offer the best in aesthetics, weight savings, and reliability. Designed specifically for your throttle cable driven LS1 equipped ride, these harnesses look as good as they function. Even better, the installation is simple and efficient! Check out the features and benefits, then completely replace your old harness and forget about electrical gremlins—thanks to Wiring Specialties Pro Series harnesses. Pro Series features and benefits: * Plug-and-play installation: The engine requires only 3 wires to be connected—starter signal, ignition signal, and fuel pump * No cores and additional wiring required * Integrated coil pack harnesses included * Standalone 5-circuit Bussmann fuse/relay block provided; no connections to OEM fuse boxes required * Circuits provided: Ignition, Fuel Pump, Fan1, Fan2 and A/C relay * Proper gauge wiring support for dual, 30 amp, PCM-controlled cooling fans * Point-to-point digital test on every wire * Constructed using OEM connectors and TXL Automotive wire with OEM colors * Made with high temp TXL wire (-40C to +125C operating temperature) with adhesive shrink tubing * ThermaShield 1,200F Aluminum/Fiberglass connector protection provided for knock sensors * Wrapped in lightweight nylon loom with -94C to +257C operating temperature * They have integrated transmission harnesses, and allow for more customization when selecting options like ECU, injector, and AFM connectors * They use high-temperature braided sleeving, and are built to exceed OEM specs for wire temperature rating, quality, and power/ground routing * The harnesses are designed from the ground-up for performance, optimization, and modularity, plus they're "tucked" for a clean professional appearance * Developed in-house on actual engines to ensure a perfect fit to the engine and chassis * Wiring Specialties use an OEM-style wiring construction process—they utilize hydraulic crimping machines that crimp wire and terminals with over 2000 lbs. of force * All harnesses undergo a wire-to-wire electronic test after assembly, to ensure that no wire pinout mistakes were made during assembly
( 1 )
$819.00
On Sale
For maximum power with exceptional drivability, transplant the power of fuel injection into your vehicle with Painless Performance fuel injection harnesses. All kits include straightforward instructions and TXL high-temperature, color-coded, and labeled wire for ease of installation. All fuel injection harnesses are 100 percent quality-tested on OmniScanners to ensure the viability of the circuits. Harnesses for both GM and Ford applications are available and they use genuine original equipment connectors for trouble-free installation and operation.
( 94 )
$564.99
—
$762.99
$508.49
—
$686.69
Roto-Fab cold air intake systems supply your ride with maximized power gains and an impressive appearance. Their selection of American-crafted systems includes several options that will also provide awesome sound, as well as CAI setups for supercharged (S/C) applications where air demands are higher. Most Roto-Fab intake systems install without modifications and perform well with stock calibrations. Their S/C systems offer great tuning capabilities to gain the most from your setup. All feature large duct sizes, generous air box volumes, and oversized filters. The air boxes come standard with a high-gloss black powdercoat finish. Whether naturally aspirated or supercharged, Roto-Fab cold air intake systems are designed to fit better and deliver a performance difference you will see and feel.
( 93 )
$544.95
—
$689.95
On Sale
Developed with performance in mind, Holley EFI LS single plane split-design race intake manifolds feature a race bred, 2-piece split design that was previously found only on the most expensive race intakes. These manifolds will fit GM LS Gen III engines with cathedral port heads for high performance/racing engine applications with 5.3 to 6.2 liter displacement and maximum engine speeds of 6,000 to 7,000 rpm, depending on the engine combination. The single-plane design provides optimal performance across the rpm spectrum, while the split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, makes custom porting and matching a snap. Shoulder bolt locators and an O-ring seal makes reassembly simple and precise.
( 4 )
$821.95
$628.95
—
$738.95
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 222 )
$595.95
—
$638.95
Whether you need a lower, upper, or inner shell, FAST intake manifold components are available to keep the performance flowing. These replacement shells are designed for and identical to the original pieces. They feature the same high-quality polymer material that will provide lighter weight, increased strength, and improved heat dissipating characteristics. FAST's intake manifold replacement shells are available for their LSX, LSXR, and LSXRT manifolds.
Not Yet Reviewed
$501.95
—
$523.95
Tanks Inc. manufactures EFI-Ready fuel tank kits that look like an OE tank when installed. The fuel pump and sending unit are recessed in the tank for easy installation, with no modification needed to your car. In most applications, these tanks are fuel injection ready. They are all manufactured from galvanized steel with a silver powdercoat finish. Tanks Inc. fuel tanks are perfect for your pro-touring, autocross, or road racing ride. NOTE: These EFI-Ready Fuel Tank Kits are designed for vehicles with engines retrofitted for electronic fuel injection. The tanks have holes pre-drilled for the pump—and the baffling in the tank is suited for electric fuel pumps. They include the sending unit and pump in the tank, ready-to-go for installation.
( 51 )
$541.99
—
$660.99
Nick Williams Performance drive-by-wire throttle bodies are precision CNC-machined from billet aluminum to meet the demands for increased airflow on the drive-by-wire LSX and LTX performance engines. These throttle bodies require an aftermarket intake to fit the larger diameter throttle blade. They use a 6-pin late model connector that works with late model wiring harnesses. Tuning is required for installation; and the Nick Williams Performance drive-by-wire throttle bodies come complete with stepper motor and electronics installed. There is no need to disassemble your factory throttle body. Order the model designed for your vehicle and engine application.
( 21 )
$690.00
—
$715.00
Summit Bucks
ACDelco GM Genuine Parts turbocharger actuators are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for your Chevrolet, Buick, GMC, or Cadillac vehicle. For optimal performance, choose a replacement turbocharger actuator that you know will fit and function like the original from ACDelco GM Genuine Parts.
( 5 )
$776.99
Are you looking for a high-flow billet throttle body? The FAST engineering team used the latest computer modeling software and real-world testing to produce these throttle bodies, which yield the maximum flow per square inch of cross-sectional area. All FAST throttle bodies are machined from super-strong 6061-T6 billet aluminum in precision CNC machining centers for consistent quality and light weight.
( 3 )
$739.95
Roto-Fab Big Gulp Series air intake systems were designed to feed the air demands of the fastest cars in the world. Don't leave horsepower on the table—get the most out of your modifications. Order the kit recommended for your specific vehicle. Roto-Fab Big Gulp Series air intake system features and notes: * Innovative air box coupling: allows for solid mounting to the air box as the system transitions from the air filter clamping surface; seals out unwanted engine heat * Air box seals effectively to the hood, allowing for maximum air filter size and air box volume * Utilizes the full factory air inlet to ensure low IATs and maximize performance * 100 percent silicone hose couplers to ensure lasting product quality * Custom fabricated inlet elbow to maximize performance and airflow cross-section * Oversized breather port to further accommodate high-horsepower applications * Polymer duct work is also effective in reducing heat transfer * Requires a custom tune for your vehicle
( 4 )
$614.95
—
$719.95
On Sale
FASS Fuel Systems Titanium Signature Series fuel/air separation systems are a beneficial upgrade for your diesel engine. Titanium systems feature compact designs, powerful motors for improved fuel flow, and advanced filtration that's far superior to your factory fuel filter. Their diesel fuel lift pumps are engineered to be top performing, reliable, long-lasting units—and are backed by a limited lifetime warranty on all light-duty diesel applications. The Signature Series also features FASS revolutionary Whisper Technology that effectively and drastically reduces the sound levels of these diesel systems to a "whisper," while at the same time increasing fuel flow rates. Whether stock or highly modified, FASS Titanium Signature Series diesel fuel systems are available to handle your engine's horsepower. Features and benefits: * Systems available with flow rates up to 290 gph * Advanced filtration removes water, air, vapor, and debris with a filtration rating of 2 micron * Smoother engine idle * Protects and extends the life of your injectors * Whisper Technology (FWT)—reduces noise levels without reducing flow rates * Performance Radius Cuts (PRC)—advanced machining technique creates smooth cuts within aluminum housing * Improved fuel volume delivery * Mass Flow Return (MFR)—technology used to continually "polish" your fuel by keeping positive pressure on fuel being delivered to your engine, guaranteeing the cleanest fuel possible. Also prevents cavitation, along with galling and scoring. * Improved cold weather starts * Decreases carbon monoxide and carbon dioxide emissions * Easier bolt-on bracket mounts do not require any drilling or welding to mount new pump * 1/2 in. fuel lines and ports * Fuel mileage improvement * 30,000 mile filter life expectancy
( 58 )
$689.00
—
$729.00
$620.10
—
$656.10
On Sale
Holley offers a variety of direct replacement EFI wiring harnesses, including multi-port, sequential, and throttle body injection styles. These units are made with premium components to ensure better reliability and performance for your ride--and they're compatible with many engine swaps. Holley EFI systems wiring harnesses are sold individually or as a kit; choose the model needed for your fuel injection application.
( 31 )
$632.95
—
$699.95
$568.95
—
$628.95
Tanks Inc. manufactures fuel tank kits that look like an OE tank when installed. The fuel pump and sending unit are recessed in the tank for easy installation, with no modification needed to your car. In most applications, these tanks are fuel injection ready. They are all manufactured from galvanized steel with a silver powdercoat finish. Tanks Inc. fuel tanks are perfect for your pro-touring, autocross, or road racing ride. NOTE: These are standard stock replacement kits for carbureted engine applications. They include the sending unit and pump in the tank, ready-to-go for installation. If you have retrofitted your engine for electronic fuel injection, please see the Tanks Inc. EFI-Ready Fuel Tank Kit options.
( 68 )
$543.99
—
$744.99
If you are looking for the convenience of an oil-free air filter, Roto-Fab dry cold air intake systems put a new spin on great performance and sound. Roto-Fab developed these intake systems to utilize all the available space to package a huge air box and massive filter while maintaining an extremely effective barrier against engine bay heat. Their intake packages perform well as a "stand alone" modification while being capable of meeting the higher air demands of supercharged and high-horsepower builds. Roto-Fab's open top design effectively seals to the hood which maximizes air box volume while providing all of the advantages of a lid. Features include: * Top-quality components throughout including: high-gloss silicone hose couplers, stainless steel hose clamps and fasteners, and molded-in inserts for air box and MAF sensor mounting * High-quality filters designed to last the life of the vehicle * Depending on application, systems are available with or without sound tube delete * Detailed, step-by-step instructions are included for easy installation * Where applicable, the logo badge on the air box has a black anodized finish with a laser-etched Roto-fab logo
( 41 )
$509.95
—
$564.95
On Sale
DeatschWerks fuels your passion for performance with fuel injectors specifically designed and engineered for your Sport Compact, Modern Muscle, and European vehicles. DeatschWerks fuel injectors are manufactured to fit your OE harness, fuel rail, and manifold. Because they are application-specific, you'll spend less time installing and tuning, so you can spend more time enjoying the increased performance of your ride! They provide an excellent spray pattern and atomization for optimized idle and tuning. Each set is flow-matched both statically and dynamically, and flow-balanced to within one to two percent. A flow report is included with each set of DeatschWerks fuel injectors.
( 68 )
$599.00
—
$799.00
$539.10
—
$719.10
Edelbrock Super Victor II intake manifolds are designed for use with large cubic inch big-block Chevy engines using the latest design conventional port heads. They're ideal for any 1,000+ horsepower drag race engine with high air flow requirements. Slip collar distributors are recommended for these manifolds when used on short deck blocks. All manifolds have extra-large carburetor outer flanges with a 5 x 5 in. opening to fit high flow carburetors and throttle stops. Modern casting techniques create smooth, thin, extended divider walls for "out of the box" performance, just port match and go!
( 7 )
$637.95
—
$854.95
On Sale
Quick Fuel HR-Series carburetors are packed full of the features that you'd expect from a high performance carb. They're available in your choice of vacuum or mechanical secondary versions, and you can select the cfm that's right for your specific engine combination. The Quick Fuel HR-Series carburetors feature screw-in air bleeds, QuickSet sight windows in the fuel bowls, 4-corner idle circuits, screw-in idle restrictions, and a bright, shiny finish for durability.
( 47 )
$799.95
$628.95
—
$718.95
Dual plane Chevrolet Performance Parts' Carbureted LT1 intake manifolds make it possible to take advantage of the advancements found in Generation 2 Chevy engines. They allow you to install a carburetor on your LT1 engine without the hassle of running a computer or emission controls. They accept both Holley and Quadrajet carburetors, and feature longer runners that increase engine torque by up to 30 ft.-lbs. without sacrificing top-end power.
( 28 )
$507.67
On Sale
Corsa carbon fiber DryTech 3-D air intakes blend aesthetics and engineering to deliver in a single package. The intakes efficiently direct airflow from the filter to the throttle body. Streamlining the airflow eliminates any calibration concerns, and helps increase throttle response. Features include: * 100 percent carbon fiber construction * Outflows stock intake creating more horsepower and torque * DryTech 3-D synthetic dry filter
( 6 )
$675.99
$608.39
Dart dual plane intake manifolds are designed to improve torque, add horsepower, and make that otherwise stock engine look a little more aggressive. They are manufactured from durable cast aluminum and are machined to tight tolerances for excellent flow characteristics. The manifolds' optimized runner length and plenum style offer improved low end to midrange performance.
( 3 )
$814.95
Halltech Killer Bee MF103 cold air intake kits offer bolt-on horsepower and torque for your C6 Corvette. These performance induction systems require no additional tuning, however, if you choose to tune, you can expect 31 to 35 RWHP. Killer Bee systems include Halltech's Beehive heat shield that isolates the air filter and MAF sensor from the incredible heat of the engine bay, and they feature a forward design of the mass airflow sensor and velocity stack for improved idle manners. Halltech CAD-designed, plug-and-play Killer Bee induction systems also feature strong and durable XLPE poly construction. They are offered in black or red to complement your red fuel rail covers, and come with stock (OEM size) throttle body and connector hose with PCV hole, or you may choose NW (Nick Williams) throttle body and connector hose with or without PCV hole. Killer Bee systems also work with Corvette Carbon Editions.
( 3 )
$619.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
