Availability
Showing In Stock Items. Show All 660 Items.
On Sale
Holley retrofit engine oil pans for GM LS engines are designed to install an LS engine in a variety of GM muscle car and truck chassis. They provide OEM fitment, OEM oil filter mounting, OEM oil cooler port provision, OEM engine NVH suppression, OEM flange gasket and sealing, proper structural rigidity, and OEM bellhousing attachments. The oil pans are manufactured from traditional high-quality cast aluminum and include a sump baffle, oil pump pickup tube, sump plug, oil filter stud, and oil passage cover.
( 247 )
$435.95
—
$514.95
$306.95
—
$462.95
On Sale
Holley LS engine accessory drive kits offer simple, clean, cost-effective solutions when swapping a GM LS engine into a muscle car, truck, hot rod, or any other vehicle. These bracket kits deliver a factory-style appearance, correct belt alignment, and factory stability. They fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets—reducing cost and complexity. Holley LS engine accessory drive kits position the A/C compressor high above the crossmember, but below the hood line, for an easy installation. The brackets are manufactured from diecast aluminum with a natural, polished, or black finish. (An application-specific installation kit is required, but sold separately.)
( 52 )
$469.95
—
$603.95
$258.95
—
$448.95
On Sale
Holley Gen V LT accessory drive installation kits allow the use of high-mount LS accessory drive systems on LT engines. These kits allow you to choose the source for supplemental accessories and components that are often already on a donor engine or host vehicle. This drive system has incorporated an upgrade to the conventional looking and central located (Camaro style) LS water pump that works in conjunction with an OEM LT1 truck harmonic balancer. Holley Gen V LT accessory drive installation kits include spacers for the LS style brackets, water pump spacers, solenoid reclocking retainer ring, re-routed front harness, and all hardware. Other features: * No engine modification required * Hides temperature sensor and harness connector from site * Cost effective and proven solution * Utilizes conventional single sided belt * Easy way to add power steering with your Gen V LT swap
Not Yet Reviewed
$289.95
$260.95
On Sale
Install an LS powerplant under the hood of your classic car or truck using a set of Hooker LS engine swap headers. They feature mild steel construction and are available painted, or ceramic coated in silver or black. Hooker headers' unique design will optimize the performance of your LS engine.
( 11 )
$349.95
—
$549.95
$314.95
—
$493.95
On Sale
Hot rodding has always been about taking two or more parts that were never designed to work together and make then work together seamlessly. It is a never-ending effort to shove as much horsepower and torque under a vehicle's hood as possible. Unfortunately, any project can come to a screeching halt when it comes to bolting up a set of headers. Hedman Hot Rodz engine swap headers are specifically designed for non-factory engine and vehicle model combinations. Available in mild steel or stainless with 16-gauge header tubes uncoated and coated. The HTC silver and Black Maxx ceramic-metallic coatings offer superior heat insulation and anti-corrosion properties to protect your "Hedder" investment and retain more heat inside the header tubes for increased exhaust velocity and improved scavenging.
( 70 )
$302.99
—
$599.99
$272.69
—
$539.99
On Sale
Headers are widely believed to be one of the best performance values available today--so why put stock manifolds on your trick ride? After dropping a different engine into your project vehicle, help it produce more horsepower and fuel economy with these specialty and engine swap headers from Hedman. They feature durable 18-gauge steel construction and have thick 1/4 in. flanges for a long-lasting, leak-proof seal. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 184 )
$306.99
—
$482.99
$276.29
—
$434.69
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$359.95
—
$380.95
$323.95
—
$342.85
On Sale
Hooker Super Competition engine swap transmission mount kits are available for Chevy, Chrysler, and Ford small block and big block engines. These strong mounts are designed from steel and are engineered to provide you with an exact fit and a simple installation. Hooker Super Competition engine swap mount kits are the mounts of choice when matched with the appropriate engine swap.
( 11 )
$449.95
$403.95
On Sale
Doug's Headers offers engine swap transmission crossmembers for a variety of classic Chevrolet and GMC applications. They are CAD-CAM designed, welded steel with a durable black powdercoat finish for proper fit, strength, and appearance. Ideal for 2WD trucks with GM LS and LT engines, one part number fits with ALL popular late-model manual and automatic transmission swaps. The crossmembers come complete with necessary hardware and detailed instructions. Notes: * Designed to clear up to 3 in. exhaust systems with no loss of ground clearance * Designed for use with Doug's Headers line of LS engine swap products
( 5 )
$279.00
—
$335.25
$251.10
—
$301.72
On Sale
Holley GM Gen-V LT engine swap oil pans are designed for LT engine swap installations in classic car and truck chassis' requiring more oil pan to chassis clearance around the front half of the oil pan. GM's new Gen V LT direct injected engines are starting to find their way into a large variety of vehicles. They make great power and are very durable and reliable. Unfortunately, the factory oil pans don't always fit or they hang too low for today's hot rods. The solution? Holley's GM Gen-V LT swap engine oil pans! They will provide maximum clearance to the chassis and ground, plus, they provide an OE-style fitment for durability and proper sealing. Features: * These oil pans are perfect for: 1967-1992 Camaro/Firebird, 1968-1974 Nova/Apollo/Ventura/Omega, 1978-1987 G-body, 1964-1972 A-body, and 1973-1987 Chevy/GMC Full Size Trucks * Designed to provide more oil pan to chassis clearance around front half of the oil pan * Allows for up to 4.00 in. crankshaft stroke * Can be used anywhere a GM F-Body oil pan can be used * Provides OE-style fitment—OE oil filter mounting, OE oil cooler port provision, OE engine NVH suppression, OE flange gasket and sealing, proper structural rigidity, and OE bell-housing attachments * Traditional high-quality cast aluminum appearance with clean exterior styling * Provides maximum clearance for vehicles where the steering linkage is behind the engine cross-member * Oil cooler port provision * Cast and machined aluminum * 1/2 in. NPT port—ideal for Turbo oil return or PCV oil return * Optional hinge door baffle (available separately) * Complete kit includes: windage tray, sump baffle, OE-style pick-up tube, sump port plug, oil filter stud, billet oil passage cover, etc.
( 2 )
$516.95
—
$549.95
$464.95
—
$493.95
On Sale
Wrap yourself up in 10 points of protection, these Competition Engineering 10-Point roll bar main hoop kits give you that extra protection required when you truly get competitive and head out to the circuit races. These 10-point roll bar main hoop kits come with the main loop, one top loop, two front down struts, one main hoop crossbrace, and two diagonal hoop supports. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding definitely. Working with the interior out also makes it much easier to get proper fitment, and assure proper welds are achieved. These main hoop kits will require the appropriate strut kits to complete the cage install. These main hoop kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 14 )
$339.99
—
$365.99
$305.99
—
$329.39
On Sale
When you want your ride to be as safe as possible, these Competition Engineering 12-point roll bar strut kits give you superior strength and driver protection with proper installation. These strut kits are the partner package for the 12-point roll bar main hoop kits. They include the two rear struts, two front door bars, two diagonal hoop supports, one rear X-brace, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 weld joint gussets. These combined with the main hoop kit give you the surrounding protection of a 12-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 1 )
$294.99
$265.49
On Sale
Competition Engineering 10-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including models from GM, Chrysler, Dodge, and Ford. Competition Engineering 10-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 10-Point Roll Bar Main Hoop Kit, which includes the main hoop, top hoop, main hoop crossbrace, two diagonal hoop supports, and two front downstruts * 10-Point Roll Bar Strut Kit, which includes two rear struts, two door bars, weld joint gussets, and steel mounting pads (6 in. by 6 in. by 1/8 in thick) * Complete instructions for a hassle-free installation
( 21 )
$524.98
$472.48
On Sale
Dragsters and hot rod racers attain speeds between 200 and 300 mph, so every safety precaution can spare you from serious injury or worse. Competition Engineering 8-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including sport compacts and models from AMC, Chrysler, Dodge, GM, and Ford. Competition Engineering 8-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 8-Point Roll Bar Main Hoop Kit, which includes the main roll bar hoop * 8-Point Roll Bar Strut Kit, which includes a main hoop crossbrace, two front door bars, two rear struts, two diagonal hoop supports, six weld joint gussets, and eight 6 in. by 6 in. by 1/8 in. thick steel mounting plates * Complete instructions for a hassle-free installation
( 37 )
$407.98
$367.18
On Sale
Add more cubic inches and power to your vehicle with the help of Hooker Blackheart engine swap mount kits. The kits are available for most popular models of cars and trucks with a variety of popular engine sizes. They include all of the components you'll need, at a cost that won't break your budget.
( 69 )
$299.95
$269.95
On Sale
Upgrade your Corvette today with aFe Control PFADT Series engine mount sets—and see how much performance you've been missing! These engine mount sets are designed to replace the OE mounts with aFe upgraded polyurethane bushings, thus, improving vehicle launches, traction, and overall improvement in drivetrain feel. The engine mount sets consist of the following components, such as CNC-machined 6061 anodized mounts mated to nickel plated engine brackets via replaceable, quality polyurethane bushings, stainless steel positioning pins, and quality-grade hardware to help you to facilitate your upgrade—from start to finish!
( 2 )
$433.00
$389.70
On Sale
Holley LS engine alternator and power steering brackets are designed to help you get your alternator and power steering pump mounted in the proper location. They include the necessary hardware to mount the assembly in place. An application-specific installation kit may be required, and must be purchased separately if needed.
( 13 )
$292.95
$263.65
On Sale
Doug's Headers offers a variety of engine swap products for many Chevrolet, GMC, and Pontiac cars and trucks from the 1960s, '70s, and '80s. These OEM-quality cast aluminum oil pans come with oil pickup, tube, gasket, and all hardware. They fit up to 4 in. stroker cranks and include oil drain ports for turbo applications. Order the model recommended for your vehicle.
Not Yet Reviewed
$424.35
$381.92
On Sale
Drag racers want their cars to be as safe as possible, and Competition Engineering 12-point roll bar main hoop kits offer superior strength and chassis rigidity for 360 degree driver protection. This design links the cage to the front frame, essentially making it one solid unit--you'll notice better control and vehicle reaction time. These packages furnish you with the main hoop, one top hoop, two front downstruts, one main hoop crossbrace, and two forward struts. This type of modification is required on most racing circuits for increased cabin safety and side impact security. The units require only minor modifications and welding for solid installation; they're tailored for specific types of cars, so check the applications for matching specs. Competition Engineering 12-pt roll bar main hoop kits require also ordering the appropriate strut kit if you desire a complete roll cage install. Both kits are available in mild steel and chromoly.
Not Yet Reviewed
$384.99
—
$391.99
$346.49
—
$352.79
On Sale
aFe Street Series engine oil pans bring performance engineering to the protection of your engine. Each oil pan is constructed out of durable cast aluminum with machined fins for maximum strength and styling. The cover incorporates a magnetic drain plug to capture loose particles for maximum engine protection. All necessary hardware is included with the aFe Street Series engine oil pans for a hassle-free installation.
Not Yet Reviewed
$352.80
—
$403.20
$317.52
—
$362.88
On Sale
Building your protective race bubble begins with one of these Competition Engineering 8-point roll bar main hoops. Made from your choice of chromoly or mild steel, these strong one-piece hoops mount easily with minimal welding, reinforcing the cabin safety through increased rigidity. This type of modification is required on most racing circuits for improved driver protection. In order to install a complete roll cage, you'll also need the appropriate strut kit (sold separately)--or save time by simply ordering the complete roll bar hoop and strut assembly package. Match your vehicle to the support bars needed to ensure a secure cockpit design.
( 38 )
$279.99
—
$288.99
$251.99
—
$260.09
On Sale
aFe Pro Series engine oil pans are constructed out of durable cast aluminum with a black powdercoat finish and machined fins for maximum strength and styling. The built-in external and internal fins transfer heat from the oil to the outside air for maximum cooling. Pro Series pans offer increased oil capacity over stock for better performance over a longer duration and incorporate a magnetic drain plug to capture loose particles for maximum engine protection. RTV silicone and all necessary hardware is included for a hassle-free installation. When it comes to engineering for power, performance, protection, and value, aFe Power is the only choice.
( 1 )
$379.05
—
$428.40
$341.15
—
$385.56
On Sale
DeWitts engine oil lines with bypass are modified hose assemblies for use with driver side (left) EOC applications. The adapter block includes a port for the oil pressure switch. Choose the proper oil lines for your vehicle.
Not Yet Reviewed
$370.99
$333.89
On Sale
Summit Racing™ SBC crate engine startup kits have assembled all of the gaskets, fluids, and extra parts typically needed to set up a new engine.The small block Chevy kits will save you time and money. These kits include: * Oil filter * Oil dipstick * Intake gasket set * Water pump gasket set * Water neck gasket * RTV silicone * Exhaust manifold gasket set * Oil filter adapter * Break-in motor oil (five quarts) * Dex-Cool coolant (two gallons)
Not Yet Reviewed
$262.10
$258.43
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
