Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
256 Results Found For "Engine"
Showing In Stock Items. Show All 456 Items.
On Sale
Holley Terminator X MAX Engine Management Systems
Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions
( 91 )
$1,849.95
—
$2,099.95
$1,663.95
—
$1,888.95
Eagle Street Performance Rotating Assemblies with Silv-O-Lite Claimer Pistons
Eagle street performance rotating assemblies offer the perfect balance of strength, performance, reliability, and affordability. They include a cast steel crankshaft, Eagle "SIR" I-beam connecting rods, Silv-O-Lite claimer pistons, Perfect Circle rings, and Performance Street bearings. The kits are only available balanced. Eagle street performance rotating assemblies are the perfect choice for engines up to 500 hp. Order the model designed for your year, make, and engine application.
( 25 )
$1,500.99
—
$1,533.99
Eagle Street and Strip Rotating Assemblies
Eagle Street and Strip rotating assemblies consist of name-brand quality components for a wide range of engines at an affordable price. These kits feature a crankshaft, pistons, piston rings, rod and main bearings, and connecting rods. Based on your application, balanced assemblies are also available. Order the model designed for fitment on your year/make vehicle and engine application.
( 87 )
$1,712.99
—
$1,878.99
Scat Engine Rotating Assemblies
Scat engine rotating assemblies are available with either a high-quality Scat forged 4340 crankshaft or Scat's Series 9000 cast crankshaft, plus I-beam or H-beam connecting rods with 7/16 in. or 3/8 in. cap screw bolts. For maximum power and reliability, Scat adds rod and main bearings from King, Federal Mogul, or Clevite 77, depending upon the application—and pistons and piston rings made by such well-known manufacturers as SRP/JE, Ross, KB, Mahle, Diamond, and Probe. Kits with cast and standard forged pistons have standard rings; kits with premium forged pistons have file-fit rings. Nearly 800 Scat kits are available; order the package tailored for fitment with your engine application.
( 133 )
$1,515.99
—
$1,937.99
Summit Bucks
Trans-Dapt Performance Swap-In-A-Box Complete Engine Swap Kits
Trans-Dapt Performance Swap-In-A-Box complete engine swap kits feature everything you need to transplant that new engine into your ride. They include a set of application-specific headers (painted or ceramic coated), motor and transmission mounts, and some kits contain oil filtration components. By matching up these parts by vehicle, Trans-Dapt ensures a swap with minimal modifications needed for installation. Give your ride a heart transplant using one of these turnkey Swap-In-A-Box complete engine swap kits!
( 62 )
$1,507.99
—
$1,986.99
BluePrint Engines Muscle Series Cylinder Heads
Welcome to a new class of high performance cylinder heads--BluePrint Muscle Series! These aluminum heads are assembled with the perfect match of components for outstanding, trouble-free performance. Plus, they give you more power behind the wheel and in your wallet! These all-cast heads are designed for hydraulic flat tappet and hydraulic roller cam engines with hefty intake runners, stainless steel valves, Viton® seals, and dual springs. BluePrint Engines stand in front of the class, offering both performance and cost-conscious enthusiasts a powerful alternative--Muscle Series cylinder heads.
( 89 )
$1,599.00
Clearance
ATK Marine Rebuilt Long Block Engines
ATK Marine Engines offers premium-quality rebuilt long block engines specifically for boating applications. These engines are designed to deliver maximum performance and long-term durability for your boat. Order the model recommended for your marine application. ATK Marine rebuilt engines include: * Special marine pistons and rings * Special marine camshaft * Marine gaskets * New intake and exhaust valves * New main, rod, and cam bearings * New valve lifters, rocker nuts, and swivels * Heavy-duty double roller timing chains * Cam sprocket * Crank gear * Freeze plugs
( 45 )
$2,673.99
—
$3,097.99
$1,872.50
—
$1,999.50
VEGE Remanufactured Long Block Crate Engines
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 74 )
$1,805.99
—
$1,936.99
Summit Racing™ Pro LS Piston and Rod Kits
Summit Racing™ Pro LS piston and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. They're available in a broad range of fitment and performance options. Standard features and specs may include: * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Precision wrist pins and retainers * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet-sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control
( 19 )
$1,500.97
—
$1,505.97
Summit Racing™ Pro LS Crank and Rod Kits
Summit Racing™ Pro LS crank and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. Order the kit recommended for your vehicle and engine. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in.
( 1 )
$1,599.98
HP Tuners CORE Standalone Engine Control Units
Get ready to "Push the Boundaries" with HP Tuners CORE standalone engine control units! Created and designed for gearheads and craftsmen who need the utmost level of customization, CORE ECUs deliver superior control over your powerplant with many features that go beyond the constraints of factory ECUs. They provide all the necessary sensor interfaces, ignition drivers, injection drivers, and output drive stages required for total engine control. Bringing the CORE ECU to life is HP Tuners' VCM Live software, combining the diagnostics and calibration elements into a single, user-friendly interface. HP Tuners CORE ECUs are designed for all levels of LS swaps and high-performance motorsports builds. Currently CORE supports Gen 3 and Gen 4 LS engines with a 24x crank and 1x cam trigger along with 58x crank and 4x cam triggers. Drag, circuit, off-road racing; drifting, rally, or restomods, no matter what your high performance application, HP Tuners CORE ECU will provide everything you need for total control, performance, and ease of use. Order yours today. Key features: * Up to 16 injector control (fuel) and 8 coil packs (spark) * Sequential injection * Flex Fuel support * Dual throttle body capability * Two built-in Lambda controllers * Internal datalogging--up to 150 channels at 1kHz * 3 CAN bus networks (2 CAN and 1 HPT net) and ethernet connectivity * Turbo boost and anti-lag control * Single-stage On/Off and progressive nitrous control * Launch control * Map switching * A/C control, alternator control, etc.
Not Yet Reviewed
$1,999.99
Chevrolet Performance LS427/570 Engine Controller Kits
Chevrolet Performance controllers are uniquely calibrated for installation in older vehicles—unlike the controllers from regular-production vehicles. That means many features required for late-model production vehicles are "turned off" because they are not required in older cars and trucks. This helps to prevent the unnecessary triggering of diagnostic trouble codes that could possibly affect performance or require additional calibration adjustments. These engine controller kits are designed exclusively for Chevrolet LS427 570 horsepower wet sump LS7 crate engines. If you have a late model Chevy, you'll want this kit! The kit includes: * Engine controller * Wiring harness * Mass airflow meter * Throttle pedal assembly * Oxygen sensors
Not Yet Reviewed
$1,920.24
Edelbrock Pro-Flo 4 Plus Self-Learning Engine Management Systems
Edelbrock Pro-Flo 4 Plus systems simplify EFI for the "Big Three"! These ingenious engine management systems support late model Ford Coyote, Chevrolet LS, and Mopar Gen III Hemi engines, along with all their performance benefits in hot rod transplant applications. Each package consists of an ECU, wiring harness, and a 7 in. wireless touch screen tablet for programming, calibration adjustments, and monitoring performance. All systems are plug-and-play and are supported by a standalone Edelbrock Android app "E Tuner 4 Plus" specific for Pro-Flo 4 Plus applications. There is no laptop tuning required, base calibrations are provided, the systems are self-learning, and you can expect great out-of-the box performance. Edelbrock Pro-Flo 4 Plus systems feature: * Full VCT control of Coyote and Gen III Hemi engines with no add-on modules * Controls up to two drive-by-wire throttle bodies (LS applications) * Dual on-board wideband oxygen sensors with left and right bank closed loop AFR control using Bosch LSU4.9 sensors * Knock control using OEM sensors to provide knock feedback (harness sold separately) * High impedance injector drivers * E-Tuner PLUS simplified tuning interface. Tune wirelessly with Bluetooth using an Android device * Refined base calibrations with little or no tuning required. No costly dyno sessions required, just load a calibration and go! * Cosmetically appealing, fully terminated, modular wiring harness makes installation easy * Fully potted and weatherproof compact ECU design
( 1 )
$1,879.95
FAST EZ-EFI 2.0 LS Self-Tuning Engine Control Systems
FAST EZ-EFI 2.0 LS self-tuning engine control systems are the easiest way to get your LS transplant up and running without the complex PCM flashing and harness reworking required with the stock computer. These kits feature all of the advantages of the award-winning EZ-EFI 2.0 ECU; plus, they also include the EZ-LS ignition controller and use stock or aftermarket LS injectors, sensors, and coil packs. Each FAST EZ-EFI 2.0 system utilizes an easy-to-use interface through the included touch screen hand-held and doesn't require a laptop or tuning experience. After initial setup, the hand-held can be used as a digital dash with the included suction cup window mount. The EZ-EFI 2.0 system actually tunes itself as the user drives—and because it keeps tuning, future engine upgrades are a breeze, meaning that expensive trips to the shop for simple tune changes are a thing of the past. A purpose-built, OEM-quality wiring harness is included in each kit, as well. It features a clean, mesh wrapping that dramatically improves engine aesthetics over the factory harness. FAST EZ-EFI 2.0 LS self-tuning engine control systems are compatible will all LS-based car and truck engines.
( 5 )
$1,979.95
FAST XFI Sportsman EFI Engine Control Systems
For cars with an identity crisis (they don't know if they're a street car or a race car), XFI Sportsman electronic fuel injection systems fill a hole in the middle of the FAST lineup. They're designed to satisfy the enthusiast who does spend some time racing, but also spends time cruising. These EFI engine control systems will serve to simplify the tuning process and give you the capability to control the engine with greater control and precision than currently exists. When we say simple, we mean really simple--installation is a snap, and if you've ever worked with tuning software in the past, XFI's C-Com software will be familiar to you. If not, then you can use the self-tuning option and be off to the races as you learn the capabilities of your new system. The FAST systems ship with an ECU, wiring harnesses, wideband oxygen sensor, and electronic fuel pressure kit.
( 5 )
$1,712.95
Summit Bucks
Jones Racing SBC 602/604 Crate Engine V-Belt Drive System Kits
Jones Racing SBC 602/604 crate engine V-belt drive system kits are designed for maximum Circle Track racing efficiency. The folks at Jones Racing Products spent a lot of time finding the perfect balance of cooling and performance from these kits. They have everything needed to complete the front of the GM crate Circle Track long block. These kits are supplied with all the necessary belts, spare belts, mounting hardware, and spacer. Kit also includes: * Aluminum short water pump * Aluminum power steering pump with built-in tank * Mini lightweight aluminum one-wire alternator with 45 amps at idle/70 amp max * Billet aluminum brackets and pulleys
Not Yet Reviewed
$1,553.47
On Sale
Holley LS Engine Swap Accessory Drive Systems
Now available from Holley are LS engine swap accessory drive systems. Included are accessories and pulleys that are manufactured by OEM part suppliers for durability and direct bolt-on installation. Order the kit that's best suited for your vehicle and engine application. Features and facts: * Universal brackets fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets--thus reducing cost and complexity compared with competitive products * Simple, dedicated installation kits allow easy fitment to Corvette, F-Body, or truck drive offsets * Accessories, tensioner, and pulleys are manufactured by OEM suppliers and many of the parts are used on production vehicles today
( 34 )
$2,151.95
$1,749.95
—
$1,935.95
Pacific Performance Engineering Exhaust Manifolds
Replacing your stock exhaust manifold and up-pipes should be the first step in building a high performance exhaust system. Pacific Performance Engineering exhaust manifolds are co-designed by Honeywell (Garrett) and PPE, using CAD software to maximize flow characteristics. The included up-pipe bellows are high-flow, internally sleeved, and manufactured from 11-gauge, 0.120 in. wall aircraft-grade stainless steel with a 2 in. O.D. The exhaust manifolds are machined from high-silicon moly cast iron; feature built-in bosses; and are pre-drilled and tapped for a 1/8 in. NPT EGT sensor. PPE exhaust manifolds will help lower exhaust gas temperatures, reduce drive pressure, and accelerate turbo spool-up while maintaining reliability. Order the model recommended for your application.
( 2 )
$1,520.99
Camburg Engineering KINETIK Series Billet Control Arms
Introducing the Camburg Engineering KINETIK Series billet control arms, the ultimate setup for your rig. These upper arms are meticulously designed and refined to meet high standards. CNC-machined from aerospace-quality 6061 billet aluminum, they are bead blasted, Type II anodized (color options), and feature a laser-etched Camburg logo. Equipped with a larger FK 1.50 in. uniball with a PTFE liner, these arms offer increased strength and misalignment for maximum wheel travel. They're far superior to cheaper imports. The uniball is adapted to the spindle/knuckle using model-specific spacers machined from heat-treated stainless steel. No drilling or modifications are required. The 1.50 in. uniball allows for a larger and stronger 9/16 in. 12-point bolt with a low-profile press-on uniball cap for durability. Additional camber and caster adjustment is possible with the use of larger and stronger FK 7/8 in. chromoly Heim joints, which also eliminate flexing/deflection under hard use and braking without binding. The arms come with AN/Mil-spec hardware, including a single pinch bolt and secondary jam nut for secure Heim joint attachment. The new V2 design increases usable wheel travel, corrects camber and caster, and eliminates weak factory ball-joints. All necessary hardware is included for easy installation. The control arms are available for a variety of applications, including many Toyota, Lexus, Chevrolet, GMC, and Ford trucks from 2003 and up. They're designed for 1-4.5 in. of lift, depending on model.
Not Yet Reviewed
$1,699.00
Pacific Performance Engineering CNC-Ported LLY/LBZ/LMM Cast Iron Cylinder Heads
PPE's CNC-ported LLY/LBZ/LMM cast iron cylinder heads are the ultimate upgrade to your Duramax engine to eliminate any head gasket or cracking concerns. Cast from high-quality alloyed gray iron, the PPE cylinder heads offer elevated fatigue strength, heat, and creep resistance, which prolongs the cylinder head's lifespan significantly. The cylinder heads also share the same heat expansion rate as the stock cast-iron cylinder block—no more blown head gaskets! PPE's CNC-porting process improves airflow, enhancing power, fuel efficiency, and throttle response while reducing engine stress and turbo lag. By smoothing the ports and maintaining wall thickness, these heads provide increased horsepower and torque without sacrificing reliability. Tailored to each specific head, the CNC machining compensates for casting variations, ensuring consistent and optimized airflow dynamics. Whether you have a damaged aluminum cylinder head or a desire for better reliability and longevity on your Duramax engine, cast iron cylinder heads from Pacific Performance Engineering are undoubtedly the best choice. Product features: * Specially alloyed gray cast iron liquid-cooled cylinder head * 5-Axis CNC-ported intake and exhaust ports for smooth, unrestricted airflow * Increased thermal efficiency compared to aluminum heads * Reduced noise and vibration, better ride * Eliminates head gasket scrubbing issue (blown head gasket) * Higher fatigue strength and heat resistance * Premium 21-4N, Stellite-reinforced exhaust valves * Fully nitridated valves, better abrasion resistance * Ready to install—comes with all valvetrain components, rocker arm dowels, and freeze plugs * Requires the use of LBZ/LMM glow plugs on LLY engines (sold separately) Important Notes: The valve seats of the PPE heavy cast iron cylinder heads are installed with an interference that maximizes the durability and lifespan of the cylinder heads. Such interference might not be optimal for extreme-performance applications where a significant amount of heat is created. For those applications, PPE suggests that the exhaust valve seats be replaced with higher interference (+0.006 in. to +0.008 in.) oversized exhaust valve seats (Nominal size 34mm).
Not Yet Reviewed
$1,709.99
Lingenfelter Performance Engineering 102mm LS9 Supercharger Front Cover Assemblies
Lingenfelter C6 ZR1 LS9 supercharger snout or supercharger front cover assemblies provide reduced pressure drop and increased horsepower on stock and higher pulley ratio applications. The front supercharger cover casting was designed to provide a more direct path for the airflow from the throttle body to the supercharger. This reduced inlet restriction leads to increased boost and reduced supercharger work. Results include reduced supercharger parasitic losses and reduced supercharger outlet temperatures. Additional details: * Lingenfelter has seen chassis dyno tests results of 30 hp rear wheel gain over the stock snout on a ZR1 in testing with their upper pulley kit already installed * The cover casting is based on the inlet design first used on the Lingenfelter modified 2009 ZR1 that has run 9.813 seconds at 145.74 mph in the quarter mile * Drag strip, chassis dynamometer and engine dynamometer proven design * Cast from 356T6 aluminum, 100 percent leak-checked using OEM decay-type leak checking process * Casting is also designed to allow for the use of larger throttle bodies up to 102mm with no machining required * For increased durability under higher supercharger loads, the cover features a stainless steel 10-bolt hub that allows pulleys to be quickly changed on the car * This kit also includes the Lingenfelter L960130709 isolator coupling
Not Yet Reviewed
$1,656.75
Camburg Engineering FOX 2.0 Performance Lift Kits
Camburg Engineering FOX 2.0 Performance lift kits are high-quality suspension upgrades for trucks and SUVs, combining Camburg's robust upper control arms with FOX 2.0 Performance Series IFP (Internal Floating Piston) shocks. They're designed to lift vehicles (typically 0-2.5 in.) while improving off-road capability, handling, and wheel travel with durable construction, better geometry, and increased durability over stock components. Order the kit recommended for your vehicle. Complete suspension package details: * FOX 2.0 IFP coilovers: Adjustable front shocks with a durable alloy body, billet aluminum parts, and a steel shaft, providing lift and increased suspension travel * Camburg tubular upper control arms: Replace weak OEM ball joints with strong uniball joints, offering improved strength, greater wheel travel, and better alignment (caster/camber) for enhanced handling and preventing rubbing * FOX 2.0 Performance shocks: Larger-bodied rear shocks (sometimes with external reservoirs) for better heat dissipation and control over rough terrain * Lift and performance: Lifts the front typically 0-2.5 in., increasing ground clearance, wheel travel, and overall control for a smoother ride on-road and better performance off-road * Available for various makes and models, including Ford F-150, Toyota Tacoma, Tundra, and 4Runner, among others. * Benefits: -- Improved ride quality: Absorbs bumps and undulations better than stock suspension -- Enhanced off-road capability: More wheel travel and control for tackling trails -- Stronger components: Uniball control arms are more durable than factory ball joints -- Corrected geometry: Better caster/camber for improved handling and alignment
Not Yet Reviewed
$1,687.56
On Sale
Holley Mid-Mount Complete Accessory Systems
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 106 )
$2,049.95
—
$2,202.95
$1,843.95
—
$1,981.95
Tilton ST-246 Twin Disc Clutch Kits
Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque
( 9 )
$1,576.75
