CHEVROLET | Summit Racing

Holley Terminator X Engine Management Systems

Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)

4.48 out of 5 stars ( 96 )

$1,399.95

—

$1,499.95

Holley Terminator X MAX Engine Control Modules

Holley Terminator X MAX engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each X MAX ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Order your Holley EFI Terminator X MAX Service ECU today. Features: * Compatible with all Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (fuel and oil pressure inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories, such as: -- Fans, boost control, nitrous control, IAC kit, and more * GM LS and LT, Ford Coyote, and Mopar Gen V drive-by wire throttle body control * GM 4L60 and 4L80, and Ford 4R70W transmission control * Boost Control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous Control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant

4.29 out of 5 stars ( 7 )

$1,229.95

On Sale

FiTech Ultimate LS Standalone ECUs

FiTech presents Ultimate LS standalone ECUs. These self-learning ECUs are offered with and without transmission control. So if you're considering utilizing a factory intake, throttle body, and injectors, FiTech Ultimate LS standalone ECUs will get your engine ready for optimal performance.

3.8 out of 5 stars ( 51 )

$1,202.00

$1,081.80

Haltech Rebel LS Gen 3 and 4 ECU Kits

Haltech's Rebel LS ECU kits provide the most cost-effective, easy-to-install, start-up and drive aftermarket ECU experience. Designed for Gen 3 or 4 LS engines, the all-in-one kit concept simplifies your purchase decision, eliminating the need for costly additional accessory purchases. Each kit arrives with a Rebel ECU, main engine harness and adapter harnesses for throttle, injectors, T56 transmission, (DBW -Gen 4) or (cable throttle and IAC – Gen 3) alternator, knock sensor, existing GM MAP, oil pressure sensors, along with a Bosch O2 and air temp sensor with weld bungs. Installation is a breeze, using a labeled and pre-terminated drop-in harness, which easily connects to existing factory LS sensors. Engine start-up is made easy through the Setup Wizard in the Haltech NSP software and the soon-to-be-released Haltech Connect app. Answer six questions – LS Engine type, cam, throttle body, MAP, injectors and coils with the Wizard prompting a throttle calibration and system check, ensuring an engine that will quickly start, idle and drive. Drivability is continually improved with Haltech's advanced self-learning while additional tuning for your N/A, turbocharged, supercharged or nitrous LS is achieved through Haltech's NSP software. Finally, the Rebel LS ECU kit is compatible with Haltech's plug-and-play CAN accessories, such as the iC-7 dash, keypads, PDM, EGT, wideband and flex-fuel sensors.

5.0 out of 5 stars ( 5 )

$1,495.00

Eagle Street and Strip Rotating Assemblies

Eagle Street and Strip rotating assemblies consist of name-brand quality components for a wide range of engines at an affordable price. These kits feature a crankshaft, pistons, piston rings, rod and main bearings, and connecting rods. Based on your application, balanced assemblies are also available. Order the model designed for fitment on your year/make vehicle and engine application.

4.41 out of 5 stars ( 87 )

$1,211.99

—

$1,477.99

Eagle Street Performance Rotating Assemblies with Silv-O-Lite Claimer Pistons

Eagle street performance rotating assemblies offer the perfect balance of strength, performance, reliability, and affordability. They include a cast steel crankshaft, Eagle "SIR" I-beam connecting rods, Silv-O-Lite claimer pistons, Perfect Circle rings, and Performance Street bearings. The kits are only available balanced. Eagle street performance rotating assemblies are the perfect choice for engines up to 500 hp. Order the model designed for your year, make, and engine application.

4.76 out of 5 stars ( 25 )

$1,152.99

—

$1,424.99

Trans-Dapt Performance Swap-In-A-Box Complete Engine Swap Kits

Trans-Dapt Performance Swap-In-A-Box complete engine swap kits feature everything you need to transplant that new engine into your ride. They include a set of application-specific headers (painted or ceramic coated), motor and transmission mounts, and some kits contain oil filtration components. By matching up these parts by vehicle, Trans-Dapt ensures a swap with minimal modifications needed for installation. Give your ride a heart transplant using one of these turnkey Swap-In-A-Box complete engine swap kits!

3.5 out of 5 stars ( 62 )

$1,032.99

—

$1,307.99

Summit Racing™ Chevy 350 Engine Kit Pro Packs

These Summit Racing™ Chevy 350 engine kit Pro Packs give you virtually everything you need to assemble your Chevy 350. Features include: * Your choice of forged, hypereutectic, cast, or no pistons * Your choice of Summit Racing™ Stage I, Stage II, or no connecting rods * Available with or without Summit Racing™ Engine Shop cast, 2-piece, rear main seal crankshaft * Sealed power piston rings in your choice of standard, .020, .030, .040, or .060 * Rod and main bearings available in your choice of standard, .010, .020, or .030 * Sealed Power cam bearings * High-volume oil pump assembly with stock pickup welded to the pump * Summit Racing™ True Roller timing chain * Sealants, assembly lube, Plastigage, rod bolt boots, and freeze plugs

5.0 out of 5 stars ( 1 )

$1,115.82

—

$1,117.80

Federal Mogul Lower Engine Kits

Don't look at it as taking it apart; look at it as a chance to build it better. Use a Federal Mogul lower engine kit to rebuild your engine better than new. All Federal Mogul lower engine kits feature Sealed Power and Fel-Pro components that provide innovative designs, use leading-edge materials, and utilize ISO and QS certified manufacturing in order to deliver top-quality products that meet the rigorous demands of today's modern engines. The kits include piston rings, gaskets, and pistons, plus rod, main, and cam bearings; all parts meet or exceed OEM specifications. When you take the time to disassemble your engine, don't waste the opportunity to make improvements with Federal Mogul lower engine kits.

Not Yet Reviewed

$1,039.94

Summit Racing™ Pro LS Piston and Rod Kits

Summit Racing™ Pro LS piston and rod kits deliver industry-leading fit, finish, and durability at an affordable price. These assemblies are tested to over 1,200 hp in turbo applications. They're available in a broad range of fitment and performance options. Standard features and specs may include: * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual-ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Precision wrist pins and retainers * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet-sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control

4.84 out of 5 stars ( 19 )

$1,479.97

—

$1,485.97

Edelbrock Pro-Flo 4 LS Self Learning Engine Management Systems

Edelbrock Pro-Flo 4 LS self learning engine management systems include an engine control unit (ECU) and engine wiring harness designed to run Gen III LS engines equipped with a 24x reluctor wheel or Gen IV engines equipped with a 58x reluctor wheel. This kit is perfect for LS engine swaps where you still want to retain the factory intakes and injectors. These Pro-Flo 4 engine management systems are designed to give the same self-learning capabilities and functionality of Edelbrock's Popular Pro-Flo 4 EFI complete systems while maintaining the factory look. It is recommended to regularly check for firmware updates.

4.17 out of 5 stars ( 6 )

$1,210.95

—

$1,222.95

Pacific Performance Engineering LB7 Cast Iron Cylinder Heads

OEM Duramax cast aluminum cylinder heads fall short over time; the different heat expansion crates between cast iron engine block and cast aluminum cylinder head cause head gasket scrubbing, and eventually blown head gaskets. Aluminum cylinder heads are also prone to warping, melting, and/or cracking in high performance applications where excessive heat is introduced. Pacific Performance Engineering LB7 cast iron cylinder heads are the ultimate upgrade to your Duramax engine and eliminate any head gasket or cracking concerns. Cast from high-quality alloyed grey iron, PPE LB7 cylinder heads offer elevated fatigue strength and heat and creep resistance, which prolongs the cylinder head's lifespan significantly. They also share the same heat expansion rate as the stock cast iron cylinder block, so no more blown head gaskets. These cylinder heads also feature cast-in fuel injector cups and solve the OEM injector cup leaking issue. Each head comes complete with brand new springs, spring retainers, spring locators, valves, valve seals, valve keepers, valve seats, valve guides, rocker arm dowels, and freeze plugs. Whether you have a damaged aluminum cylinder head or a desire for better reliability and longevity on your Duramax engine, the Pacific Performance Engineering LB7 cast iron cylinder head is undoubtedly the best choice. Component features and benefits: * Premium 21-4N, Stellite-reinforced exhaust valves, and chrome-silicon alloy intake valves * All valves are fully nitridated with increased abrasion resistance * High-strength, CNC-machined chromoly steel spring retainers and spring locators * Upgraded tapered valve springs provide faster response and eliminate valve float at high rpms * Powdered metal valve seats offer superior wear and heat resistance * Significantly reduced diesel engine clatter compared to the factory aluminum cylinder heads * Increased thermal efficiency compared to aluminum heads * 3-Year Unlimited Mileage Warranty

Not Yet Reviewed

$1,349.99

Hooker LS Engine Swap Headers

Install an LS powerplant under the hood of your classic car or truck using a set of Hooker LS engine swap headers. They feature mild steel construction and are available painted, or ceramic coated in silver or black. Hooker headers' unique design will optimize the performance of your LS engine.

4.27 out of 5 stars ( 11 )

OEM Duramax cast aluminum cylinder heads fall short over time; the different heat expansion crates between cast iron engine block and cast aluminum cylinder head cause head gasket scrubbing, and eventually blown head gaskets. Aluminum cylinder heads are also prone to warping, melting, and/or cracking in high performance applications where excessive heat is introduced. Pacific Performance Engineering LLY/LBZ/LMM cast iron cylinder heads are the ultimate upgrade to your Duramax engine and eliminate any head gasket or cracking concerns. Cast from high-quality alloyed grey iron, PPE LLY/LBZ/LMM cylinder heads offer elevated fatigue strength and heat and creep resistance, which prolongs the cylinder head's lifespan significantly. They also share the same heat expansion rate as the stock cast iron cylinder block, so no more blown head gaskets. These cylinder heads also feature cast-in fuel injector cups and solve the OEM injector cup leaking issue. Each head comes complete with brand new springs, spring retainers, spring locators, valves, valve seals, valve keepers, valve seats, valve guides, rocker arm dowels, and freeze plugs. Whether you have a damaged aluminum cylinder head or a desire for better reliability and longevity on your Duramax engine, the Pacific Performance Engineering LLY/LBZ/LMM cast iron cylinder head is undoubtedly the best choice. Component features and benefits: * Premium 21-4N, Stellite-reinforced exhaust valves, and chrome-silicon alloy intake valves * All valves are fully nitridated with increased abrasion resistance * High-strength, CNC-machined chromoly steel spring retainers and spring locators * Upgraded tapered valve springs provide faster response and eliminate valve float at high rpms * Powdered metal valve seats offer superior wear and heat resistance * Significantly reduced diesel engine clatter compared to the factory aluminum cylinder heads * Increased thermal efficiency compared to aluminum heads * 3-Year Unlimited Mileage Warranty

Not Yet Reviewed

$1,349.99

MSD Chevy Crate Engine Ignition Kits

These MSD Chevy crate engine ignition kits make it easy to add MSD performance to your new crate engine. They come available with MSD's Pro-Billet HEI distributor for applications that have enough room to take advantage of an internal coil and large distributor cap. For applications with limited firewall clearance, MSD offers a kit with their Pro-Billet Ready-To-Run distributor and powerful Blaster SS coil. Both kits include a set of universal 8.5mm Super Conductor wires, Pro-Clamp wire separators, and a billet hold-down clamp. They have everything you need to light the fire in your new crate engine!

4.78 out of 5 stars ( 18 )

$1,024.95

472 Results Found For "Engine"