Availability
Showing In Stock Items. Show All 180 Items.
Today, life is a bit easier! Trick Flow® engine steam line fittings for GM LS are available to upgrade the factory steam tubes of your modified LS-powered cars and trucks to update your race car plumbing system. The fittings are black anodized billet aluminum and attach to the corners of your GM LS cylinder heads. They feature -4 AN male threads and include O-rings and stainless steel bolts. Upgrade to easy with Trick Flow® engine steam line fittings for GM LS.
( 13 )
$15.99
—
$18.99
Keep the hot coolant circulating with molded heater hoses from Dayco. These hoses are constructed from synthetic EPDM for high-strength and resistance to oil, salt, mud, debris, coolants, and environmental elements. The inner base tube of Dayco molded heater hose is reinforced with knitted rayon for maximum strength and burst-resistance. They eliminate the need for multiple connections of hoses and clamps. Dayco hoses are specifically designed for your application to ensure proper fit and function.
( 105 )
$10.99
—
$22.99
Summit Racing™ coolant crossover delete kits allow you to block off the rear coolant crossover or steam passages on your LS cylinder heads. The low-profile design gives extra clearance and does not require removal of the block-off when removing the cylinder head bolts. These delete kits include two billet aluminum plugs, O-rings, and bolts. Order the kit recommended for your year/make and engine application.
( 3 )
$19.99
Resistant and resilient, Edelmann power steering return hoses won't fail you. These replacement hoses are impervious to oil, heat, and ozone which cause ordinary assemblies to fail prematurely. Their tube construction will withstand internal oil temperatures of up to 300 degrees F. The hoses are assembled with zinc-chromate plated couplings and fittings for protection against rust and corrosion. Restore your vehicle's power steering with fresh Edelmann return hoses—available for fitment on countless makes and models spanning more than a half-century.
( 60 )
$13.99
—
$21.99
Continental molded radiator hoses are pre-shaped for specific applications and are constructed to original equipment manufacturers' specifications. They're molded to provide full flow-through tight bends, ease of application, and stress relief on radiator connections. Their tough Versigard rubber tube and cover resist heat, ozone, and chemical coolants—and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or surpass SAE J20R4, D1 specifications. Hundreds of models are available for fitment on a wide range of vehicles. Order the length, diameter, and shape designed for your cooling system. When it's time for a replacement, make Continental your first choice for molded radiator hoses.
( 437 )
$10.99
—
$25.99
Continental molded bypass hoses feature a Versigard rubber tube and cover to resist heat, oil, and weather. Their Tylanar-knit reinforcement meets or exceeds SAE J20R3, D1 specifications.
( 43 )
$11.99
—
$21.99
Summit Racing™ heater bypass hoses are perfect when deleting your heater core. These hoses allow engine coolant to flow without any restrictions. Made from high-quality silicone, these hoses can withstand the hottest of coolant temperatures. Summit™ heater bypass hoses make deleting your heater core easy.
( 5 )
$16.99
—
$21.99
Keep your ride cool and running efficiently with Dayco molded radiator hoses. These OE-style replacements feature knitted reinforcement and all-synthetic EPDM rubber construction—which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40 to 257 degrees F. The inner base tube of these hoses is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hoses. Dayco molded radiator hoses are available in more than a thousand configurations, with dozens of length and diameter options, to achieve fitment on most any vehicle.
( 170 )
$11.99
—
$21.99
ACDelco Gold molded radiator coolant hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. These OE-style hoses are specially designed, GM factory-molded replacements to fit today's smaller, tighter-fitting engine compartments. ACDelco Gold coolant hoses are temperature rated from -40 to 275 degrees F (-40 to 135 degrees C) and are approved for marine applications. Order the model recommended for your vehicle. (Note: Do not use these molded coolant hoses for fuel or oil transfer purposes.) Features include: * Protective sleeves (where applicable) help duplicate General Motors OE for proper fit and function * Designed to resist electrochemical degradation for durability * Available for vintage and heavy-duty applications
( 71 )
$13.99
—
$20.99
If you have a hole in your radiator hose, replace it with Dayco flexible radiator hoses. Designed to replace straight or molded radiator hoses, these precision-corrugated hoses feature knitted reinforcement and synthetic EPDM construction combined with an inserted helical steel coil spring. The Dayco design provides excellent flexibility without flattening or collapsing, as well as the ability to resist splitting, ballooning, environmental elements, coolants, and temperature changes. Dayco flex radiator hoses are available in a selection of sizes to keep your coolant flowing.
( 162 )
$11.99
—
$21.99
The Right Stuff offers you the best-fitting, most exact reproduction brake lines on the market. They utilize state-of-the-art CNC benders and automated end-forming machines to double-flare lines with remarkable consistency. The Right Stuff brake line sets are available in OEM steel or stainless steel, front or rear, and provide you with more responsive, reliable brakes for the security of an assured stop. All brake line kits feature steel fittings. Over a thousand applications are inventoried--so no matter what you're driving, there should be no problem finding The Right Stuff replacement brake lines!
( 656 )
$20.99
Russell speed bleeders let you bleed the brake lines on just about any vehicle all by yourself. Just replace the old bleeder screws with speed bleeders. They have an internal check valve that will pump excess air and fluid out for you. A special coating on the speed bleeders' threads keep them from admitting air into the system, and keep expelled air and fluid out. When you're done, just tighten the screws and go on to the next brake cylinder.
( 259 )
$15.95
Edelmann power steering pressure hoses are constructed to last. The covers are highly resistant to oil, heat, and ozone, that can cause ordinary assemblies to fail prematurely. The inside tube can withstand internal oil temperatures of up to 300 degrees F. Plus, high-tensile strength braided fabric helps these hoses withstand pulsation pressures of up to 1,500 psi and bursting pressures that exceed 6,000 psi. Tubing is coated with a zinc-aluminum alloy with an aluminum-rich epoxy topcoat, and the couplings and fittings are zinc plated for rust and corrosion protection.
( 122 )
$13.99
—
$21.99
Continental OE technology series flexible radiator hoses can be shaped for specific applications and are constructed to original equipment manufacturers' specifications. Their tough EPDM rubber tube and cover resist heat, ozone, and chemical coolants, and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or exceed SAE J20R4, D1 specifications. Continental OE technology series flexible radiator hoses are available for all your custom needs.
( 54 )
$12.99
—
$24.99
Dorman heater hose connector fittings are available for a wide range of cars, trucks, and vans--both application-specific and universal models. These parts can be used as replacements in areas such as the heater core inlet and/or outlet, and the radiator surge tank. The fittings are stocked in various sizes, materials, and shapes (straight, elbow); some are hose barb style, while others are quick-connect. Eliminate aggravating leaks in your cooling system with the help of these Dorman heater hose connector fittings.
( 56 )
$10.99
—
$20.99
Summit Racing™ billet fuel vapor purge solenoid plugs provide a simple and easy way to replace the factory solenoid in a legally acceptable engine swap application. The plugs block off the EVAP port and install in seconds. We include the plug, bolt, and O-ring.
( 2 )
$11.99
The Right Stuff brake fittings are designed to help get your brake system connected and working properly. They're manufactured from quality materials and install easily with no modifications. Order the style and size fittings needed for your brake application.
( 10 )
$16.99
ICT Billet oil level sensor and sending unit plugs are available for a variety of engines. They can be used when deleting or relocating your oil pressure sending unit--or to delete the oil level sensor in your factory oil pan. These quality delete plugs are made of aluminum and include a crush washer or O-ring, depending on the application.
( 11 )
$13.99
—
$17.99
Dorman keeps your brake system connected with their wide selection of OEM replacement brake hoses. These rubber hoses deliver increased performance and reliability and are available for most specific vehicle applications. Dorman brake hoses are fully assembled, and those with banjo end fittings include new copper washers to ensure proper sealing. All hoses are tested up to 4,000 psi to ensure that safety standards are met. Don't wait for your hose to bulge or burst--order Dorman hydraulic brake hoses for consistent performance from your brake system.
( 288 )
$10.99
—
$20.99
Modify your factory master with RAM clutch adapter fittings. These fittings are available to fit your master to -3 AN male, -4 AN male, GM and Ford 2005 and later.
( 5 )
$20.00
ACDelco Gold brake hydraulic hoses are quality reinforced hoses that carry fluid to transmit force within the hydraulic brake system. Each hose contains double crimped fittings to provide longer service life and durability. These Gold brake hydraulic hoses are high-quality replacement components for your vehicle's braking system. Order the model recommended for your application.
( 25 )
$10.99
—
$20.99
Continental heater hoses are original equipment molded heater hoses for popular applications. The tube in Continental's universal or pre-curved molded heater hoses is made with Versigard rubber--a compound that's highly resistant to heat, oil, and weather. The patented knit reinforcement is made with Tylanar fabric--a material that meets or exceeds the requirements of SAE J20R3, D1. Additional features include: * Designed for those vehicles requiring multiple or severe bends * Original configurations to ensure a perfect fit * Fits popular applications * Rugged construction
( 26 )
$10.99
—
$21.99
ACDelco GM Genuine Parts PCV valve hoses are a GM-recommended replacement component for you vehicle. These original equipment hoses will provide the same performance, durability, and service life you expect from General Motors. They are manufactured to OE specification for fit, form, and function so you can expect these hoses to fit the same as they did coming off of the assembly line.
( 15 )
$11.99
—
$18.99
Engine Works freeze plug sets are offered in brass or steel options for a range of engine applications. Each kit will include water jacket plugs, cam plug, oil galley plugs, and pipe plugs. Choose the set designed for your engine.
Not Yet Reviewed
$18.24
—
$19.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
