Availability
Showing In Stock Items. Show All 50 Items.
ARP manufactures a variety of header bolt kits to facilitate the installation of your headers. Rated at 170,000 psi, they're much stronger than stock and will last under even the most severe conditions. Each kit includes the specific number of parts required for the desired application, plus premium-quality washers and either hex or 12-point heads.
( 332 )
$14.99
—
$19.99
ARP stainless steel header bolts are 15 percent stronger than Grade 8 steel. These bolts have a compact head that will allow a socket to fit into those tight, tricky spaces next to the headers. These bolts are both highly corrosion-resistant and heat-resistant. They have a polished finish and come in 12-point and hex-style heads.
( 380 )
$19.99
Summit Racing™ offers header bolts for a variety of engine applications, from 1955 and up. These stainless steel fasteners have small 3/8 in. hex heads for use with a box end wrench and a 9/16 in. head flange that eliminates the need for washers. For rebuild, restoration, or swap, replacement bolts from Summit Racing™ will properly secure your header.
( 14 )
$12.99
—
$15.99
Walker steel band-style exhaust clamps combine a 360 degree seal with a unique design that won't crush pipes and ruin exhaust flow. This particular style was created to "lap-joint" two pipes of different diameters together (one pipe fits inside the other). The clamps come with pre-attached hardware and Grade 8 bolts for high strength and temperature durability.
( 242 )
$11.99
—
$14.99
Walker band clamps are ready to help your wrap up your exhaust installation. They are manufactured from premium steel to provide greater durability, and are available in a range of sizes. Walker band clamps offer an efficient, economical way to get your exhaust connected.
( 88 )
$11.99
—
$21.99
To protect your investment, you'll want to mount your headers with strong, reliable, quality hardware. Milodon header bolts fit the bill. They are made from rugged Grade 8 steel for extra-high strength and are heat-treated for added reliability. They have compact 3/8 in. hex heads, which allow for the use of a standard socket in those tight areas around and between header tubes. They also have a bright, classy looking gold iridited finish to complete the visual package.
( 54 )
$12.95
—
$18.95
Walker exhaust pipe connectors are designed to connect two exhaust pipes of the same inside or outside diameter to make exhaust installation easier. These pipe connectors are available in a range of different styles and sizes to accommodate your exhaust system needs. They are manufactured from premium material to provide greater durability, and an optimal OE-style fit. If you are looking for premium exhaust system hardware and accessories manufactured with great attention to detail, make Walker is your #1 choice.
( 120 )
$12.99
—
$16.99
Dorman exhaust manifold mounting hardware is designed to replace broken, stripped, or corroded stock fasteners. The studs, bolts, and nuts are manufactured from quality materials and offered in a variety of finishes. Dozens of options are available; choose the lengths and thread sizes needed for your specific vehicle application. Pieces are sold individually, in pairs, or larger quantity sets. A secure exhaust manifold begins with Dorman mounting hardware.
( 282 )
$10.99
—
$18.99
Walker exhaust manifold hardware kits include a variety of components and are designed to work with Walker aftermarket parts on hundreds of vehicles dating as far back as the mid-70s. The pieces are manufactured from durable materials to ensure tight, leak-free connections. Beneath your chassis, Walker heavy-duty hardware helps to provide years of trouble-free performance.
( 15 )
$12.99
—
$13.99
These Mega Clamps from Walker are available in aluminized and stainless steel and connect OD to ID pipes. They give your exhaust system that clean, show-car quality look. Their smooth transition lap joint allows for a proper fit to seal expanded slip-fit connections. These Mega Clamps are great for muffler, tailpipe, and merge pipe connections.
( 63 )
$11.99
—
$16.99
These Walker exhaust flanges are just what you need to fix that leaking OEM exhaust. They are made from steel and come in a variety of pipe sizes.
( 64 )
$10.99
—
$20.99
When assembling your exhaust system, look to AP Exhaust for just the right components, including steel-constructed flanges. They're available in a variety of sizes, types, and bolt patterns for fitment on many applications. Ensure a more accurate, leakproof seal by pairing AP Exhaust flanges and flange gaskets (sold separately).
( 70 )
$17.99
—
$21.99
Walker exhaust pipe adapters and reducers are offered in different styles and sizes to accommodate your specific installation needs. These exhaust components are quality manufactured from either low-carbon or aluminized steel for durability, and are perfect for repairing or building your own custom exhaust system. Whether you are connecting pipes of different sizes or the same size, Walker exhaust pipe adapters and reducers have you covered.
( 208 )
$14.99
You can try to install your headers with ordinary hardware, but it's not advisable. If it isn't impossible, it will be very difficult. However, Trans-Dapt Performance header bolts neatly solve the problem. They're specifically designed for the task. They're made from strong Grade 5 steel and have smaller-than-standard hex heads to make tightening in those difficult spots a whole lot easier.
( 30 )
$13.99
Moroso header bolts are much stronger than stock and will last under even the most severe conditions. They are constructed of Grade 8 material, feature a black oxide finish, and standard hex head for easy installation.
( 13 )
$17.99
These Standard Motor AIR pump check valves are one-way airflow control valves in the air supply tubes to the exhaust system. They are designed to prevent exhaust gas backflow into the air pump system. The valves can also be used in the air tube to the 3-way catalytic converter.
( 8 )
$11.99
—
$19.99
ACDelco starter heat shields meet or exceed OEM part specifications and are designed to deliver the fit, function, and performance of the original equipment. Choose replacements with a name you know and trust--ACDelco.
( 1 )
$20.99
Walker pre-bent intermediate pipes are manufactured and designed for durability with precision benders. The then fixture checked to ensure a precise fit for quick and easy installation. Hundreds of configurations are available for most domestic and import applications from the 1950s and up. Select the size, material, and other options recommended for your vehicle.
( 319 )
$14.99
—
$29.99
AP Exhaust provides a comprehensive offering of exhaust accessories, including manifold shoulder bolt and spring kits that can be used as time-saving solutions for manifold repair. Each kit is designed to be a direct replacement for rusted or damaged exhaust bolts and springs on specific year/make/model applications, thus ensuring an exact fit every time.
( 12 )
$15.99
Walker provides the hardware and accessories to help finish the job faster and easier. Their exhaust hangers feature OE-style design for ease of installation and a properly completed exhaust repair. The hangers are engineered for durability and long service life. Do it right. Do it the Walker way with the Walker exhaust hangers designed for your application.
( 319 )
$10.99
—
$20.99
Don't try installing your headers with conventional bolts. At best, it's a very difficult task. Often, it simply can't be done. So why even try? Spectre header bolts are designed specifically for the task, and they get the job done. They have smaller-than-standard hex heads to ease access into tight spots, and they're available to fit most domestic engines.
( 5 )
$14.99
—
$16.99
On Sale
Installing headers can sometimes be a real pain, due to the tight spaces and the location and shape of the tubes. Mr. Gasket can help make installation a little easier and also help prevent annoying exhaust leaks from under-tightened header bolts. They have both the socket-head and hex-head styles of header bolts available. Hex types are heat-treated Grade 5 steel and have smaller-than-standard heads to ease access in tight spaces. Socket-head bolts are made from stronger Grade 8 steel for added ruggedness and they're great for those really difficult-to-reach spots. Both styles have a protective black oxide finish.
( 44 )
$22.90
$12.60
—
$18.86
ACDelco Gold secondary air injection pump check valves are high-quality aftermarket replacement components for your emission system. These premium steel check valves are manufactured to meet or exceed your expectations for fit and performance. They're available for countless vehicle applications from the 1960s and up
Not Yet Reviewed
$20.99
Allstar Performance exhaust block-off plates enable you to seal off exhaust ports when repairing or storing your engine. Machined from different thicknesses of aluminum, the plates will seal standard and spread port small block Chevy exhaust ports to protect against moisture, dust, and dirt.
( 4 )
$19.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
