Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
CHEVROLET W3500 TILTMASTER Parts and Accessories
Showing In Stock Items. Show All 101 Items.
Melling Performance Oil Pumps
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 197 )
$125.99
—
$201.99
Clevite H-Series Main Bearings
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 140 )
$101.99
—
$163.99
King XP-Series Main Bearings
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 44 )
$119.99
—
$138.99
Lokar Midnight Series Flexible Braided Stainless Transmission Dipsticks
Lokar's Midnight Series flexible braided stainless transmission dipsticks feature a heat-resistant PTFE rod with a black braided stainless steel cover. The flexible inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting them inside of the headers. They're available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length recommended for your transmission application.
( 80 )
$151.95
—
$176.95
Proform High-Torque Starters
Proform high-torque starters are 100 percent new, not rebuilt. They feature an offset design that results in more clearance between the oil pan and the starter. The powerful units are offered in a variety of styles, finishes, and other options for both manual and automatic transmission applications. These replacements are available for countless vehicles from the 1950s and up.
( 122 )
$126.99
—
$212.99
Mahle Original Engine Conversion Gasket Sets
Mahle sealing products are trusted by OEMs and technicians around the globe. They are the leaders in domestic, Asian, and European applications. Mahle engine conversion gasket sets offer the right sealing performance for your project. These kits are precision-cut and contain the correct selection of gaskets and seals needed. Some kits may include RTV for upper and lower pan gaskets. Need a full set? Just add one of Mahle's head sets and you will have everything you need. Features include: * Meet or exceed the original equipment specifications * Utilize OE equivalent or better materials * Packaged in a shrink-wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
( 13 )
$156.99
—
$169.99
Proform High-Compression Racing Starters
Are you building a high-compression, high-horsepower engine? Then you're going to need one of these Proform high-compression racing starters. They're 100 percent new, not rebuilt, and are built from scratch with all-new components. Their torque rating is a healthy 4.41:1 gear reduction, capable of cranking engines up to a whopping 14:1 compression ratio. The Proform high-compression racing starters feature an offset design that results in more clearance between the oil pan and the starter. They're available in models for thousands of applications, from 1955 and up.
( 55 )
$143.99
—
$148.99
King HP-Series Main Bearings
King HP-Series main bearings are recommended for street and strip performance applications. They're designed for blown, turbocharged, NOS, and alcohol-fueled engines using aftermarket crankshafts. These main bearings have greater eccentricity for superior oiling at high rpm, and a chamfered surface for large radii crankshafts. HP-Series bearings also feature large, chamfered oil holes—and are available in 1/2 grooving for improved oiling to withstand high-rpm applications. Order the bearings designed for fitment with your specific engine.
( 48 )
$109.99
—
$135.99
Cloyes Race Billet True Roller Timing Sets
Cloyes Race Billet True Roller timing sets provide race-ready performance! These sets feature sprockets machined from premium billet steel on state-of-the-art CNC equipment to ensure the highest quality and consistency. The sprockets are induction-hardened and oil-quenched by Cloyes' in-house, multi-stage heat treat process. Sets include a Cloyes Premium True Roller chain—which features full roller action and superior strength. Side plates are cut and shaved from high-strength steel and are heat-treated for maximum fatigue resistance. Their .250 in. rollers are cold-rolled and hardened to exacting standards, increasing load and rpm capabilities. Cloyes Race Billet True Roller Speed Sets are offered with a choice of 3-or 9-keyway crank sprockets, providing multiple valve timing settings. These sets are hand-matched to qualify center distance and runout, ensuring the best performance with every set!
( 100 )
$154.99
—
$237.99
ACL Performance Race Series Main Bearing Sets
ACL Performance Race Series main bearing sets deliver everything performance bearings should be by utilizing design, metallurgy, engineering, precision quality control, and of course, years of knowledge and experience. Main bearings feature multi-layered tri-metal copper alloy construction that blends characteristics to provide high strength and excellent seizure resistance. They are manufactured to exact tolerances ensuring a reliable fit and helping to maintain consistent clearances. Main bearings are augmented with extended grooves, as well as other bearing enhancements, like increased crush, bearing eccentricity, and enlarged I.D. chamfers. ACL Performance Race Series main bearing sets are produced in standard and extra clearance versions, with or without friction reducer coating, and with modifications to meet specific build requirements, such as narrowed bearings that permit additional edge clearance when running crankshafts with exceptionally large fillet radii. In the heat of competition proven technology always comes through. The choice for your build should always be ACL Performance Race Series engine bearings. Choose the main bearing set designed for your vehicle.
( 1 )
$152.99
—
$198.99
ACL Performance Race Series Rod Bearing Sets
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$138.99
—
$141.99
Proform Super-Street Roller Rocker Arms
These Proform Super-Street roller rocker arms will help rid your engine of internal friction. They feature a race-proven, cage bearing fulcrum and roller tip. The Super-Street rocker arms not only unleash horsepower, but they also lengthen valvetrain component life and reduce wear and tear on valve stem tips. Proform rockers are precision-machined to ensure consistency and ratio accuracy, and they have a great looking anodized finish.
( 128 )
$234.99
—
$245.99
King HP-Series Cam Bearings
King HP-Series cam bearings are precision-machined to tight tolerances to control installed oil clearances, reducing operating bearing pressure. These cam bearings are constructed from seamless steel tubing with a thin layer of lead based babbit material to reduce microscopic deflections. The babbit is quickly cooled in the casting process to achieve a very fine grain structure, doubling tensile strength, therefore, the HP-Series offers much more fatigue strength than conventional bearings, and can withstand racing spring loads, while maintaining the excellent surface characteristics of babbit. King also offers HP-Series bearings with a fluoropolymer coating. Bearings with this coating retain engine oil on the surface, even under extreme heat and pressure—a great advantage! Plus, being a lubricant, it provides backup during start-up and in the event of momentary oil starvation. Use track-tough King HP-Series cam bearings in your engine—and experience the difference.
( 17 )
$149.99
—
$212.99
Clevite Coated H-Series Main Bearings
Clevite coated H-Series main bearings were developed primarily for NASCAR racing, but are also well-suited to other types of competition engines. They are especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. These H-Series bearings feature Clevite's exclusive TriArmor coating, the industry's only moly/graphite treatment. The sophisticated blend, in a low-friction PTFE polymer base, offers extraordinary protection and lubricity. Clevite H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They come with 180 degree oil grooves, and can be ordered with an extra 0.001 in. of clearance if needed.
( 4 )
$149.99
GMB OE Replacement Water Pumps
GMB OE replacement water pumps are precision-built and balanced to meet or exceed original equipment specifications. They're assembled with heavy-duty steel bearings—and are lubricated and sealed for life. Order the model designed for your vehicle application. All GMB water pumps are factory-tested for quality and include the following features: * High-flow design for long-lasting, efficient cooling * Designed for OE fit and performance * Precision-ground shaft and hub accept OE fan clutches perfectly * OE-quality forged housing is specially formed to ensure maximum coolant flow * Pressed-on impeller increases water flow * Unique no-sealant-required gasket makes installation fast and easy * Unitized seal protects bearings for long life and leak-free performance * Factory-sealed, precision-ground, one-piece bearing assembly
( 536 )
$115.99
—
$154.99
Lokar Hi-Tech Flexible Braided Stainless Transmission Dipsticks
Lokar's Hi-Tech flexible braided stainless transmission dipsticks match right up with other Lokar accessories. They feature a flexible, heat-resistant PTFE rod with a braided stainless steel cover. The inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting inside of the headers. These dipsticks are available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length and other options preferred for your vehicle make and transmission application.
( 339 )
$138.95
—
$163.95
Moroso Ultra 40 Unsleeved Custom-Fit Wire Sets
The new standard in ignition wires for racers on a budget! Moroso Ultra 40 unsleeved custom-fit ignition wire sets are the most powerful and RFI/EMI-resistant wires available for racing today. Plus, their closely woven fiberglass, silicone-impregnated insulation provides up to 8,000 extra volts of protection. Features: * Kevlar® core that's four times stronger than Aramid cores * Class-leading 40 ohms of resistance per foot * Nickel copper alloy conductors for superior spark energy transfer * Extra-thick EPDM layer for greater dielectric strength * High-temperature silicone boots that can withstand heat up to 600 degrees * Locking stainless steel plug terminals
( 144 )
$103.99
—
$127.99
King XP-Series Coated Main Bearings
Give your engine the winning edge with King XP-Series coated main bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote™ nano-composite coating takes protection to the next level without adding any additional thickness! Order the replacement main bearings designed for fitment with your engine. pMaxKote™ provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 8 )
$116.99
—
$141.99
On Sale
PRW Cylinder Head Stud Kits
PRW cylinder head stud kits offer heavy-duty fasteners, along with 12-point nuts and washers for Ford Powerstroke engines. These replacement studs are machined from 4135 chromoly steel and finished with a black oxide. They provide superior clamping power, compared to the stock bolts—which will solve the problem of head gasket failure caused by increased cylinder pressure.
( 1 )
$269.96
$229.47
Proform Stamped Steel Chevrolet Valve Covers
Proform stamped steel valve covers are 20 percent thicker than typical aftermarket valve covers. This greatly reduces the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. These heavy-gauge steel covers are officially licensed GM products and bear the Chevrolet logo and Bowtie Emblem, unless otherwise specified. They're available in both tall and short heights, with either a chrome or black crinkle finish. Oil-restricting baffles are offered in many valve covers, for those who want to maintain the PCV hookup; and all covers are supplied with grommets for use with an air breather and PCV valve.
( 318 )
$211.95
VEGE Remanufactured Torque Converters
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 54 )
$148.99
Proform High Flow Mechanical Aluminum Water Pumps
These Proform high-flow mechanical aluminum water pumps feature a stamped steel impeller spinning on heavy-duty ball bearings. The result is up to 40 percent more coolant flow, giving you real performance value for your dollar. They are available in a natural or polished finish.
( 153 )
$152.99
PRW Main Cap Stud Kits
PRW main cap stud kits help eliminate main cap walk and also protect the threads in your engine block. The main cap studs work with the main caps to help strengthen the foundation for your next high horsepower build. These main cap fasteners come complete with hardened parallel-ground washers and quality hex-style nuts. Add confidence in the strength of your engine build when you use these PRW main cap stud kits.
( 6 )
$210.84
Mahle Original Engine Gasket Sets
Mahle Original offers engine gasket sets for a variety of cars, trucks, and Jeeps. These full gasket sets include the many seals needed to rebuild your engine—all in one convenient package. The gaskets are made from a variety of materials, such as multi-layered steel or molded rubber, for use on various components. Order the Mahle Original engine gasket kit recommended for precise fitment on your vehicle application.
( 26 )
$117.99
—
$134.99
