CHEVROLET TRUCK | Summit Racing

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.33 out of 5 stars ( 21 )

$2,049.95

—

$2,609.95

Holley Mid-Mount Complete Accessory Systems

Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.

4.62 out of 5 stars ( 108 )

$2,099.95

—

$2,202.95

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.36 out of 5 stars ( 11 )

$2,049.95

—

$2,199.95

Edelbrock Pro-Flo 4 EFI Systems

Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.

4.11 out of 5 stars ( 127 )

$2,375.95

—

$2,534.95

Holley Super Sniper EFI Stealth 4150 Fuel Injection Systems

Holley Super Sniper EFI Stealth 4150 fuel injection systems are what you need to convert your vehicle to fuel injection. Holley Super Sniper Stealth 4150 systems will also look great under the hood in your choice of shiny, ceramic black, and classic gold finishes. Features and benefits include: * Compatible with draw-through or blow-through forced induction applications * 2 Bar MAP sensor * Integrated ignition timing control * -6AN fuel inlets * High-resolution full color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard--answer a few questions about your engine and it creates the base map, then starts tuning on its own! No laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real time Fuel Map Learn * Three programmable 0-5 V sensor inputs for oil/fuel/dome or nitrous pressure or other critical information * Six programmable ground outputs, five programmable ground inputs. These can provide the ECU with an input to turn on function, such as an ignition timing * One +5 V reference output, +5 V power supply for 0-5 V sensors, one sensor ground supply for 0-5 V sensors * Throttle body mounted ECU--no extra boxes to mount * Only 4 wiring connections required--battery +, battery -, switched ignition, and rpm * Required external fuel pressure regulator, 12-886 is recommended * OEM-style TPS/IAC, for years of dependable service * Included clamp-on oxygen sensor kit for 2.250 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange

5.0 out of 5 stars ( 4 )

$2,149.95

Edelbrock Pro-Flo 4 XT EFI Systems

Edelbrock Pro-Flo 4 XT EFI systems provide you with a high performance Pro-Flo XT-style intake and 90mm throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 XT EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled XT intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2.5-bar TMAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.

4.59 out of 5 stars ( 22 )

$2,754.95

—

$2,888.95

Holley Sniper EFI Stealth 4500 Fuel Injection Systems

Holley Sniper EFI Stealth 4500 fuel injection systems are what you need to convert your dragster or Pro-street vehicle to fuel injection. For engines producing 800+ hp, the Sniper Stealth 4500 systems feature eight 100 lbs./hr. injectors and a throttle body that flows a massive 1,440 cfm. These Holley systems come with a USB to CAN tuning cable and free downloadable Sniper EFI software to give you unlimited control of your engine. Holley Sniper Stealth 4500 systems will also look great under the hood in your choice of shiny, ceramic black, and classic gold finishes. Features and benefits include: * Supports up to 1,500 hp naturally aspirated or 1,250 hp forced induction with eight 100 lbs./hr. injectors * Compatible with draw-through or blow-through forced induction applications * 2.125 in. throttle plates, flow 1,440 cfm for large cubic inch engines * 2.5Bar MAP sensor * Integrated ignition timing control * Programmable launch control via 2-step and timing retard. Both can be triggered by a trans-brake input * Gen 3 Ultra Dominator-style 4-bolt air cleaner flange * -8AN fuel inlets * High-resolution full color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard--answer a few questions about your engine and it creates the base map, then starts tuning on its own! No laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real time Fuel Map Learn * Built-in single-stage wet or dry progressive nitrous control * Three programmable 0-5 V sensor inputs for oil/fuel/dome or nitrous pressure or other critical information * Six programmable ground outputs, five programmable ground inputs. These can be used to trigger or control external devices, such as nitrous solenoids and boost control solenoids. Or to provide the ECU with an input to turn on function, such as an ignition timing * One +5 V reference output, +5 V power supply for 0 to 5 V sensors, one sensor ground supply for 0 to 5 V sensors * Throttle body mounted ECU--no extra boxes to mount * Only 4 wiring connections required--battery +, battery -, switched ignition, and rpm * Required external fuel pressure regulator, 12-848 is recommended * Customizable secondary fuel pump output (TPS, rpm, or boost enabled) * User-friendly boost control with handheld adjustability * Free software included--comprehensive data logging tool to help you maximize the performance of your engine * Real-time data logging to the included 3.5 in. touch screen allows you to save information to the SD card without needing a communication cable * Programmable target air fuel ratios per boost level * Advanced boost control available via free Sniper EFI tuning software, including boost vs. rpm and boost vs. time * OEM-style TPS/IAC, for years of dependable service * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange

4.25 out of 5 stars ( 4 )

$2,199.95

TMI Pro-Classic Sport Series Split-Back Bench Seats

TMI Pro-Classic Sport Series split-back bench seats are fully assembled and are complete replacements with slider tracks. No longer will you have to waste your time and money trying to repair worn-out factory seat frames and recover them with new foam and upholstery. Ready to bolt-in with the appropriate mounting brackets, TMI Pro-Classic bench seats restore your interior with easy-care vinyl and stylish plaid inserts available in a selection of colors to complement your vehicle. Order the model recommended for fitment in your truck.

5.0 out of 5 stars ( 2 )

$2,333.00

TMI Sport Series Pro-Split Back Bench Seats

TMI Sport Series Pro-Split Back bench seats are built with all-metal frames, high-density foam padding, marine-grade vinyl covers, and contrast stitching in one of six colors. Creature comforts include side and thigh bolsters, along with full tilting driver and passenger backs. For greater comfort, looks, and safety, replace your vehicle's aging seats with a TMI Sport Series Pro-Split Back bench seat.

5.0 out of 5 stars ( 10 )

$2,056.00

Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

Not Yet Reviewed

$2,099.95

—

$2,249.95

Helix CornerKiller IFS Suspension Packages

Helix CornerKiller IFS front suspension will revolutionize your suspension and give your car or truck the ride and handling it deserves. Each front suspension is specially designed to give your classic ride modern handling and stopping power by updating all of the critical parts. Helix starts with precision-made components that are designed to work together. Tubular control arms provide the adjustability you need to setup the suspension for your car, while your choice of standard to 2 in. drop spindles help you customize the stance. Topping off the spindles is a set of 11 in. disc brakes to provide extra stopping power. Rack and pinion steering is provided by either power assist or manual racks. Finally choose between coilovers for maximum handling and a static stance or air struts for the ultimate in ride height control and ride quality. Bring your classic ride into modern days with a Helix CornerKiller IFS front suspension package.

4.0 out of 5 stars ( 2 )

$3,399.95

—

$4,099.95

Helix Mustang II IFS Suspension Packages

Helix Mustang II IFS suspension packages and kits will give your car or truck the excellent handling of independent suspension with added stopping power! IFS kits come in many different configurations with the necessary components and hardware. And with over a thousand kits to choose from, they are sure to have what you need to fit your wants and budget. From complete systems with chrome columns to their Stage 1 kits that allow you to use off-the-shelf components to complete your setup, and everything in between, Helix has the Mustang II IFS systems and kits to revolutionize your vehicle's suspension.

2.35 out of 5 stars ( 17 )

$2,199.95

—

$3,499.95

Quick Fuel QFX-Series Carburetors

These Quick Fuel QFX-Series carburetors feature an all-new die-cast aluminum main body, which has a lengthened venturi section for greater midrange torque and better airflow. The annular booster venturis are precision die-cast with CNC-machined billet aluminum inserts, providing smoother and more refined air entry, a stronger vacuum signal, less turbulence, and improved fuel emulsion for better combustion. The Quick Fuel QFX-Series carburetors use red anodized billet aluminum CNC-machined metering blocks featuring 3-circuit metering (gasoline carburetors), changeable emulsion, idle feed, and intermediate bowl and feed discharge. Next, the die-cast aluminum fuel bowl combines high strength with significant weight reduction. They feature dual threaded fuel inlets and outlets and dual sight glass holes to easily set the float levels. The Quick Fuel QFX-Series carburetors feature Quick Fuel's external linkage with four different links to select the amount of primary throttle opening before the secondaries open: moderate progressive (25 percent), medium progressive (40 percent), full progressive (50 percent), and 1:1.

4.86 out of 5 stars ( 7 )

$2,151.95

Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.0 out of 5 stars ( 2 )

$2,099.95

—

$2,249.95

Heidts Mustang II Front Suspension Kits

Get your street rod up and rolling and improve your vehicle's suspension, handling, and performance with one of these Heidts Mustang II front suspension kits. Kits include: * Crossmember * Tubular upper and lower full A-frame style control arms * 11 in. diameter brake rotors * Bearings * Seals * Shocks * Springs * Stock-type spindles * Manual rack and pinion mounted to the front of the crossmember for additional engine clearance * Outer tie rod ends * Rubber spring cushions * Spindle nuts * All necessary mounting hardware

5.0 out of 5 stars ( 5 )

$2,685.00

—

$3,015.00

Bed Wood and Parts Bed-In-A-Box Deluxe Kits

Bed Wood and Parts Bed-in-a-Box Deluxe kits include your unfinished wood choice, polished stainless steel bed strips, and matching hardware. Offered in dozens of domestic and exotic choices, the wood is ready to accept your favorite finish thanks to Bed Wood's 3-stage sanding process. They are neatly packaged in a single box, eliminating the mishaps and additional costs that often occur with multiple packages. Revitalize your truck bed the easy way with a Bed Wood and Parts Bed-in-a-Box Deluxe kit designed to fit your application!

5.0 out of 5 stars ( 1 )

$2,010.00

—

$4,750.00

RAM Pro Street Dual Disc Clutches

RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.

3.0 out of 5 stars ( 1 )

$2,159.00

Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems

Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

Not Yet Reviewed

$2,149.95

Brothers Trucks Sport Pro-Classic Split-Back Bench Seats

Brothers Trucks Sport Pro-Classic Split-Back Bench Seats are specifically designed for your vintage or classic GM truck or SUV. Add style and performance to your interior with these low-back sport benches. Constructed with a tubular steel frame and reclining mechanism, the high-density seat foam has molded sport side bolsters for support. These platforms are covered in premium black vinyl with black stitching for compatibility with any interior theme. Step up your dress up game with an assist from Brothers Trucks split-bench seats.

Not Yet Reviewed

$2,254.95

Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems

Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

5.0 out of 5 stars ( 2 )

$2,149.95

Heidts Front Disc Brake Kits

Heidts offers these front disc brake kits for several applications. They're available to update early stock spindle disc brake kits and are designed for use with Heidts Superide suspension systems. They are constructed with top-quality rotors and calipers in a variety of configurations for the ultimate in braking performance.

4.0 out of 5 stars ( 2 )

$2,216.00

Bed Wood and Parts Standard X Kits

Bed Wood and Parts Standard X kits include your wood choice, mild (paintable) steel bed strips with zinc coated hardware, plus pre-drilling of the bed-to-frame and perimeter bolt holes. The wood is pre-finished with your choice of Bed Wood's water-based, environmentally friendly formulas in satin or gloss. Both products are specially designed to seal and protect your wood, while accentuating the grain and natural beauty. The exterior wood sealer incorporates biocides, fungicides, and UV protectant to ensure long-lasting protection. Revitalize your truck bed the easy, high-end way with a Bed Wood and Parts Standard X kit designed to fit your truck bed!

Not Yet Reviewed

$2,043.00

—

$4,955.00

Bed Wood and Parts Deluxe X Kits

Bed Wood and Parts Deluxe X kits include your wood choice, polished stainless steel bed strips with matching hardware, plus pre-drilling of the bed-to-frame and perimeter bolt holes. The wood is pre-finished with your choice of Bed Wood's water-based, environmentally friendly formulas in satin or gloss. Both products are specially designed to seal and protect your wood, while accentuating the grain and natural beauty. The exterior wood sealer incorporates biocides, fungicides, and UV protectant to ensure long-lasting protection. Revitalize your truck bed the easy, high-end way with a Bed Wood and Parts Deluxe X kit designed to fit your truck bed!

Not Yet Reviewed

$2,140.00

—

$4,890.00

Bed Wood and Parts Bed-In-A-Box Standard Kits

Bed Wood and Parts Bed-in-a-Box standard kits include your unfinished wood choice, mild (paintable) steel bed strips, and zinc coated hardware. Offered in dozens of domestic and exotic choices, the wood is ready to accept your favorite finish thanks to Bed Wood's 3-stage sanding process. They are neatly packaged in a single box, eliminating the mishaps and additional costs that often occur with multiple packages. Revitalize your truck bed the easy way with a Bed Wood and Parts Bed-in-a-Box standard kit designed to fit your application!

Not Yet Reviewed

$2,325.00

—

$4,510.00

CHEVROLET TRUCK Parts and Accessories