Availability
Showing In Stock Items. Show All 134 Items.
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 189 )
$449.95
TCI EZ-TCU automatic transmission controllers are fully configured right out of the box--no tuning is necessary. Simply install them with the included instructions and then start the systems by answering the simple setup wizard questions on the included hand-held unit. They're capable of real-time switchable calibrations, which allows for multiple setups. The multi-shift settings include a full manual mode for using bump or paddle shifters. The TCI EZ-TCU automatic transmission controllers allow for maximum electronic control over shift points, shift firmness, and shift speed. Self-diagnostics enable users of every skill level to fully utilize their capabilities. Be sure to match your particular transmission with the correct EZ-TCU controller, as some models are designed for pre-2009 applications ... and other models are for 2009 and later.
( 37 )
$1,025.95
Lokar's Midnight Series flexible braided stainless transmission dipsticks feature a heat-resistant PTFE rod with a black braided stainless steel cover. The flexible inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting them inside of the headers. They're available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length recommended for your transmission application.
( 80 )
$151.95
—
$176.95
A higher-than-stock stall speed as delivered by these B&M Holeshot converters will provide several advantages and benefits to vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low-end power and torque. These high-stall converters allow the engine to launch the car at higher rpm, where more torque is available. They're a very good choice for the typical street machine that is looking for better launch capability and more strength.
( 80 )
$625.95
—
$1,049.95
These automatic transmission oil pans from Mr. Gasket are stock-depth chrome plated pans. They come complete with a washer and gasket and most have drain plugs.
( 88 )
$72.55
—
$126.95
TCI introduces a fresh line of quality filler tubes. Applications for the most popular Ford, GM, and Chrysler transmissions are available. Most of the dipsticks feature a locking stick that satisfies sanctioning bodies' racing rules. The rubber boot seal is a vast improvement over the small O-ring typically used on older OEM tube designs.
( 186 )
$44.95
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$749.95
—
$999.95
On Sale
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$205.95
—
$287.95
PRW Gold Series flexplates are engineered to handle extreme duty applications and designed to endure the punishment of modern high horsepower engines. The 4mm thick centerplate provides a solid foundation for these direct bolt-on drivetrain components. Ring gears are precision double-welded, utilizing robotic machinery and cold-welding processes for added durability. These flexplates are rigorously inspected throughout the manufacturing cycle to ensure you receive the expected quality. They are available in a wide variety of configurations to precisely match your application. Raise the bar on your high performance vehicle with PRW Gold Series flexplates. Order the style recommended for your specific vehicle and engine size. Features and specs: * Designed to fit standard OEM, aftermarket replacement, and high performance torque converters * SFI 29.1 certified * Forged one-piece steel ring gears * 0.035 in. thicker than stock flexplates * Constructed from cold-rolled chromoly steel * Long lasting yellow zinc plated finish
( 40 )
$103.18
—
$120.17
Lokar's Hi-Tech flexible braided stainless transmission dipsticks match right up with other Lokar accessories. They feature a flexible, heat-resistant PTFE rod with a braided stainless steel cover. The inner rod is stamped with appropriate trans-fluid levels, and the outer housing has a slim design that allows for mounting inside of the headers. These dipsticks are available in both firewall-mount and trans-mount styles, and a funnel adapter is included for assistance with filling. Order the length and other options preferred for your vehicle make and transmission application.
( 337 )
$138.95
—
$147.95
VEGE has honed its remanufactured torque converter operation to optimize a steady outflow of a variety of products by using and adopting standard operating procedures to supply automotive, high-performance, heavy-duty, and industrial converters. VEGE torque converters incorporate the necessary upgrades to reduce failures. Areas that are known to fail such as pump and turbine blades are reset and re-enforced. The stators are completely disassembled and reloaded with new rollers and springs. Turbine hubs that have a high failure rate are replaced with billet steel hubs. Needle bearings are replaced with new ones and in most cases upgraded to heavy duty standards. VEGE torque converters are super balanced twice! Using state of the art Hines balancers all VEGE torque converters are checked for balance during the set up and tack and after final weld. This makes for a better dynamic running torque converter.
( 48 )
$118.99
—
$148.99
ACDelco GM Genuine Parts flexplates are designed, engineered, and tested to rigorous standards and backed by General Motors. They're true OE parts that will replace your originals with the same fit and performance, and are updated to integrate new materials and technologies. Order the flexplate model recommended for your vehicle.
( 7 )
$139.99
ACDelco Gold automatic transmission fluid filters can help to ensure the reliability and performance of your automatic transmission. These filters trap impurities that may be present in the fluid before they get pumped through to the moving components of your transmission, thus avoiding damage. On-time maintenance can extend your transmission's life and keep it operating efficiently. Perform service with ACDelco Gold automatic transmission fluid filters.
( 49 )
$25.99
—
$35.99
Properly secure your flywheel with these flywheel bolts from Chevrolet Performance. These high-quality bolts feature steel construction with a durable black oxide finish.
( 5 )
$4.99
ACDelco GM Genuine Parts automatic transmission clutch housings are a factory-recommended replacement component. They will provide the same performance, durability, and service life you expect from General Motors. Order the clutch housing designed for your vehicle application.
( 4 )
$190.99
Investing in TCI transmission pans ensures the longevity of your transmission. They offer a selection of designs, depths, materials, and finishes to keep your transmission cooler and your undercarriage looking good. Skip the pans of lesser quality doomed to warp and leak; choose the policy of lasting performance from TCI transmission pans. TCI cast aluminum pans feature: * Exterior cooling fins wick away and dissipate heat * Provides additional strength and rigidity to transmission case * Ensures long transmission service-life * Include all required accessories and hardware necessary for installation TCI Max-Cool aluminum pans feature: * Black powdercoated finish * Large fluid capacity reduces internal transmission temperature * Exterior cooling fins wick away and dissipate heat * Aircraft-quality aluminum construction for strength and durability * Magnetic drain plug TCI polished die-cast aluminum pans feature: * Thicker than stock pans * Finned and polished to a high luster * Stock depth to avoid ground clearance issues * Includes drain plug for simpler fluid and filter changes * Includes necessary gaskets, filters, and installation hardware TCI chrome-plated steel pans feature: * Stock depth is easy to install * Includes drain plugs * Thicker than stock for added durability * Chrome prevents rust and adds show quality looks
( 183 )
$169.95
—
$256.95
Has your vehicle's governor cover from the factory reached its "term limit?" Might be time to choose a replacement from the experts at TCI Auto! Your old rusted and dented cover has seen years of abuse, so why let it ruin the looks of your engine bay? Now you can dress up your transmission governor with corrosion-resistant stainless steel. These aesthetically pleasing options are available in two styles—exact OEM replica or stamped with the TCI logo. Both include a rubber O-ring for a leak-free seal. Conceal the hole where the governor is located and hold it in place on the transmission with a beautiful stainless cover from TCI.
( 44 )
$17.95
—
$20.95
ACT heavy-duty clutch kits offer a clamp load increase of 20 to 50 percent over OEM, significantly increasing torque capacity. The pedal feel with these clutches varies from stock to a moderate increase. Available for street and race applications, many are SFI-certified to ensure safety.
( 87 )
$528.00
—
$547.00
ACDelco automatic transmission tailhousings fit your vehicle to deliver the same OE performance, durability, and service life as their original counterparts. They provide factory form for an easier install and a repair that stays on budget. Each of these transmission case rear extensions includes the correct seal for a tight connection. Dozens of models are available for vehicles from the 1990s and up. Order the tailhousing recommended for your application.
( 12 )
$99.99
Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque
( 9 )
$1,576.75
PRW Platinum Series high-integrity flexplates are engineered to handle extreme-duty applications and designed to endure the punishment of modern high-horsepower engines. The 4mm thick centerplate provides a solid foundation for these direct bolt-on drivetrain components. Ring gears are precision welded, utilizing robotic machinery and cold-welding processes for added durability. These flexplates are rigorously inspected throughout the manufacturing cycle to ensure you receive the expected PRW quality. They are available in a wide variety of configurations to precisely match your application. Features and specs: * SFI 29.1 certified * Forged one-piece steel ring gears * 0.035 in. thicker than stock flexplates * Constructed from cold-rolled premium steel * Long-lasting platinum finish that helps prevent rust * Lighten for quicker throttle response
( 14 )
$118.29
VEGE Remanufactured automatic transmissions enable you to get back on the road quickly—without breaking the bank! With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured automatic transmissions with a level of quality that equals that of new OEM products at extremely competitive prices. The parts are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Thousands of models are available, with aluminum case, torque converter included, and gear options from one through eight. Includes fluid. Get your vehicle shifting into gear with a reman auto-trans from VEGE.
( 7 )
$2,065.99
—
$2,295.99
When servicing your flywheel or clutch, Dorman flywheel fasteners are recommended for replacement. Make sure you have the bolt with the correct thread pitch, head size, and length to get the job done right. Their high-quality steel construction is coated with black oxide for corrosion resistance and long-lasting durability. Make sure you have the right components for the job with dependable Dorman parts.
( 14 )
$12.99
ACDelco automatic transmission shift solenoid valves are GM-recommended replacement components. Keeping your transmission shifting and operating efficiently is crucial to the overall life of vehicle. These original equipment solenoids will provide the same performance, durability, and service life you can expect from a General Motors direct part.
( 5 )
$25.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
