Availability
Derale Performance transmission pans can double your transmission's life by dropping its temperature 20 to 50 degrees. These pans hold additional fluid and have heat-conducting metal tubes on the bottom. A replacement gasket is included.
( 200 )
$255.98
Yukon Gear & Axle differential carrier bearings are low-cost replacements for Positraction or locker upgrades. They bearings are made of steel and most include races and shims. Order the kit recommended for your axle application.
( 18 )
$86.99
These National Bearing automatic transmission selector shaft seals are designed to keep your transmission sealed up properly. They are manufactured from durable steel and have a rubber insert for a leak-free seal. The selector shaft seals are available to fit most automatic transmission models.
( 3 )
$6.99
Dura-Bond automatic transmission bushings are available in a wide range of offerings covering the aftermarket and today's needs for improved quality and tolerances. Individual bushings and kits are available, as well as semi-finished options that allow you to machine bore for proper fit and centerline accuracy. Dura-Bond transmission bushings feature seamless construction that makes installation easy, eliminating breakage and bushing surface interruptions. * Full round Babbitt bushings: Tight tolerances, no walking, no possible split when installing, wall tolerance of .0005 and O.D. tolerance of .001 * Bronze bushings: Hard and strong, long lifespans; resist shock, impact, wear, and corrosion * Coated bushings: Retains transmission engine oil on the surface, even under extreme heat and pressure, providing secondary lubrication in the event of momentary oil starvation * Dry film lubricant coating: Provides solid lubrication of parts subject to torque or contact stresses for maximum fatigue life, improved surface properties, excellent load carrying capacity, and intermittent dry lubrication * Bushings with indents: Provide lubricant reservoirs for better oil retention that allows for excellent and prolonged service * Bushing kits are constructed with all the necessary bushings to complete a rebuild and are manufactured to precise OEM dimensions for an exact fit
( 10 )
$3.99
—
$15.99
Make sure that the job is done right with National Bearing differential carrier bearings. You can trust National Bearing to supply you with bearings manufactured with technology-driven processes to the most stringent of thresholds and manufacturing tolerances. Look to National Bearing's differential bearings to provide you with the confidence that you need when completing your ring and pinion installations.
( 5 )
$60.99
Trail-Gear locking hubs are true replacements. These genuine, factory-new locking hubs are available for several applications. They typically include hub gasket, with some also including cover hardware.
Not Yet Reviewed
$173.52
These Timken automatic transmission selector shaft seals are designed to keep your transmission sealed up properly. They are manufactured from durable steel and have a rubber insert for leak-free seal. The selector shaft seals are available to fit most automatic transmission models.
( 6 )
$6.99
Spicer Drivetrain Products light-duty U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat-treated for maximum life. The bearing cups are case-hardened for strength and durability, while the seals are crafted from nitrile rubber for optimum grease retention and contaminant exclusion. Ample grease reservoirs in each trunnion assure effective lubrication; they're pre-filled with high-quality synthetic lithium grease, providing superior friction-reduction and resistance to higher temperatures. These replacement universal joints are available for dozens of positions, in greasable and non-greasable styles. Order the model designed to fit with your vehicle and engine type.
( 148 )
$29.99
ATP automatic transmission control solenoids are designed to replace faulty factory units and keep your transmission shifting smoothly. They're available in a variety of configurations for dozens of transmission types—on thousands of vehicle applications. These replacement solenoids meet or exceed OEM specifications.
( 1 )
$47.79
Moog wheel bearing and hub assemblies feature problem-solving innovations and include application-specific design enhancements. They are engineered to overcome problems and deliver smooth, reliable performance. Features and benefits of Moog wheel bearing and hub assemblies include: * Roll-form design ensures consistent and optimal preload * Precision-matched components; rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration * Moog abrasion-resistant ABS cord manufactured from a blended material that offers increased abrasion resistance and better protection from adverse conditions * For applications that require it, ABS molded shield and socket connections for even greater defense against contamination * Premium quad-lip seal design ensures maximum protection from contamination * Wheel studs have a protective coating that helps prevent rust and corrosion, enabling easier removal and proper torqueing of wheel nuts
( 695 )
$86.99
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 368 )
$156.99
—
$209.99
Do you want a better sealing surface? Timken wheel seals offer consistent, leak-proof performance. Manufactured with the same precision as the company's legendary bearings, Timken relies on quality materials and their knowledge of design to provide replacement parts with a longer service life. Most of these wheel bearing seals are chemical- and abrasion-resistant, keeping fluids in and dirt out. Choose a name you know to help with your next auto project—choose Timken wheels seals, available for fitment on thousands of vehicles.
( 188 )
$6.99
—
$15.99
Cardone products are the highest-quality new manufactured parts in the aftermarket. Through reverse engineering, their engineers pinpoint original equipment design weaknesses by examining failed cores. All of the technology and expertise that go into their manufacturing processes can only be found behind the Cardone name. For the past 40 years, Cardone's innovative manufacturing processes have provided a high-quality, lower-cost alternative to replacement parts. Add to that a new part number release program offering the latest-model coverage, and you get a winning combination! It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot—Cardone is your one source for replacement hard parts. Additional features of Cardone new CV drive axles: * The most advanced engineering and manufacturing processes to provide you with high-technology replacement parts * Neoprene boots resist ozone, eliminating cracking, a leading cause of CV boot failure * 3 percent moly grease provides excellent high-temperature and pressure characteristics, extending the life of the joint * All axles are supplied with a new axle nut, replacing the worn or damaged existing axle nut * Rolled axle splines guarantee the proper installation of the axle into the hub and transmission * Rolled threads guarantee the proper installation of the axle nut Order the replacement model designed for your vehicle application.
( 215 )
$86.99
—
$114.99
LuK Clutch flywheels are factory replacements for your stock components. They are perfectly balanced and precision-machined to improve clutch performance and reduce vibration. Designed by LuK's development team, they match the products to the special requirements of your vehicle, exceeding OE standards and specifications. Choose the disc diameter and ring gear tooth quantity needed for your application.
( 134 )
$88.99
FAG USA wheel bearings are compact bearing units, manufactured with a defined, preset bearing clearance. The results are rugged design, as well as for-life (no maintenance) lubrication and sealing. They feature angular contact ball bearings for both front and rear wheels, ensuring optimum performance in the most demanding situations. Fischer Aktien-Gesellschaft (FAG) has been around for over 100 years and part of the automotive industry for more than 50 of them. Put your trust in proven manufacturing and components with FAG USA wheel bearings—available for hundreds of applications.
( 4 )
$4.99
—
$56.99
Your Constant Velocity (CV) joint is immersed in grease and protected by a CV boot. Regular wear and tear or impact with road debris could cause cracks, punctures, or other damage that perforates the boot. Once the boot is punctured, water and contaminant ingress will begin to displace vital lubricating grease from the CV joint. Mevotech Duraflex CV joint boots are constructed with premium neoprene to restore protection, keep lube in, and contaminants out. The boot kits include adjustable clamps, snap ring, and grease tube for an easy installation.
( 5 )
$6.99
—
$7.99
SKF wheel bearings are engineered and manufactured to the highest quality standards using only premium-grade steel for outstanding durability and performance. Their superior seal design helps to keep out dirt and contaminants, and retains lubrication in the bearing. These wheel bearings are also able to boost reliability under heavy loads and misaligned conditions, which makes them an ideal solution for many wheel end applications. SKF Bearings wheel bearing features and benefits include: * Reduces friction and increases load-carrying capabilities * Application specific per year/make/model of vehicle
( 5 )
$52.99
Moog Premium U-joints are precision-manufactured to exacting standards. They have forged and case-hardened alloy steel crosses and heat-treated needle bearings. Cold-formed radial bearing cups provide 360 degree lubrication distribution, while superior-quality seals, and a grease fitting in the cross body make for easy maintenance. The U-joints are available for nearly two dozen positions, in universal and vehicle-specific applications.
( 252 )
$18.99
Beck/Arnley clutch master cylinders are high-quality, direct-fit OE replacement master cylinders. They will restore proper clutch operation while extending clutch life. These direct replacement parts meet or exceed OEM specifications.
( 8 )
$55.99
U-joints act as a pivot point, allowing them to continue transmitting power even when at an angle, and Matsuba universal joints are the gold standard at which all other Toyota aftermarket joints are judged. Trail-Gear Matsuba U-joints are offered as OEM replacements for your stock or mildly modified vehicle or as an upgrade for those of you whose off-roading adventures would result in any type of joint snapping. Most universal joints include zerk grease fitting and all include C-clips. Toyota, Suzuki, and Chevy applications are available. Select the Trail-Gear U-joint designed for your vehicle.
( 3 )
$56.15
Beck/Arnley clutch slave cylinders are designed to deliver increased performance and reliability. They will help to make sure that your clutch is working at optimum levels and maintaining excellent drivability. Beck/Arnley clutch slave cylinders are available for passenger cars and light trucks, so we are sure to have your application covered.
( 11 )
$24.79
SPEC Stage 3 clutch kits are designed for street, drag race, pulling, and autocross use. They feature a carbon semi-metallic 6-puck sprung hub disc that has been the leading puck clutch in drivability, life, and torque capacity. These units are intended for street and race cars that require an aggressive but streetable engagement and high torque capacity. Their hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Additional features of SPEC Stage 3 clutch kits: * Also available in 3-puck configuration * High-clamp pressure plate * Carbon-graphite friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included * Also great for road racing, rally, and drifting
( 18 )
$359.10
—
$418.50
SPEC Stage 5 clutch kits feature full-metallic discs with the highest possible friction co-efficient. They are street-drivable but not street friendly. Their hubs are solid with 12 rivets and each assembly is heat-treated for strength and durability. Additional features of SPEC Stage 5 clutch kits: * High-clamp pressure plate * Full-metallic friction material * High-torque solid hub and disc assembly * Bearing and tool kit included * Best for extreme street use and drag racing * Also excellent for pulling and autocross
Not Yet Reviewed
$530.10
—
$611.10
Clearance
Prevent leaks and save money with AutoExtra wheel seals. They're quality OE replacement parts that offer a solid choice for dependable, long-lasting service, and extended bearing life. They keep wheel bearing grease in and dirt out. You don't need to spend a lot for a good, dependable seal--all you need are AutoExtra wheel seals.
Not Yet Reviewed
$9.99
$8.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
