Availability
Showing In Stock Items. Show All 90 Items.
Yukon Gear & Axle differential carrier bearings are low-cost replacements for Positraction or locker upgrades. They bearings are made of steel and most include races and shims. Order the kit recommended for your axle application.
( 18 )
$127.99
These National Bearing automatic transmission selector shaft seals are designed to keep your transmission sealed up properly. They are manufactured from durable steel and have a rubber insert for a leak-free seal. The selector shaft seals are available to fit most automatic transmission models.
( 3 )
$7.99
Dura-Bond automatic transmission bushings are available in a wide range of offerings covering the aftermarket and today's needs for improved quality and tolerances. Individual bushings and kits are available, as well as semi-finished options that allow you to machine bore for proper fit and centerline accuracy. Dura-Bond transmission bushings feature seamless construction that makes installation easy, eliminating breakage and bushing surface interruptions. * Full round Babbitt bushings: Tight tolerances, no walking, no possible split when installing, wall tolerance of .0005 and O.D. tolerance of .001 * Bronze bushings: Hard and strong, long lifespans; resist shock, impact, wear, and corrosion * Coated bushings: Retains transmission engine oil on the surface, even under extreme heat and pressure, providing secondary lubrication in the event of momentary oil starvation * Dry film lubricant coating: Provides solid lubrication of parts subject to torque or contact stresses for maximum fatigue life, improved surface properties, excellent load carrying capacity, and intermittent dry lubrication * Bushings with indents: Provide lubricant reservoirs for better oil retention that allows for excellent and prolonged service * Bushing kits are constructed with all the necessary bushings to complete a rebuild and are manufactured to precise OEM dimensions for an exact fit
( 11 )
$3.99
—
$7.99
These Timken automatic transmission selector shaft seals are designed to keep your transmission sealed up properly. They are manufactured from durable steel and have a rubber insert for leak-free seal. The selector shaft seals are available to fit most automatic transmission models.
( 6 )
$8.99
Manufacturer Rebate
Powertrax Lock-Right and performance lockers' straight-line performance is equal to a solid spool axle, yet they automatically unlock to allow for full differentiation in turns. They also reduce the excessive noise, tire wear, and drivetrain damage associated with other lockers. Powertrax lockers replace the spider gears in your differential carrier without affecting your ring and pinion settings. The whole job can be done in your driveway with common hand tools in a couple of hours. A carrier is not included.
( 148 )
$347.99
—
$491.99
Get rock-crawling control with the addition of Trail-Gear reduction gears. Lower case gears can provide the enhanced trail performance you want, and these reduction gears are precision-ground and micro-polished to do just that—at an affordable price. Gears, gaskets, seals, and possibly more (depending on the gear set chosen) are available, as well as a choice of spline configurations. Keep your rig in high performance with Trail-Gear low-range climbing reduction gears.
( 7 )
$539.99
ATP automatic transmission inline filter kits will keep your transmission fluid clean. Foreign particles can cause premature transmission wear. These quality inline filters will do the job and are easy to install. Kits include hoses, clamps, and instructions. Sift out the bad and keep your transmission happy with inline filters from ATP.
( 12 )
$23.99
Dorman CV joint boots protect your CV joints from destructive dirt and moisture. A common cause of CV joint failure is cracks in the CV boot. When the boot is cracked, it allows dirt and grit to mix in with the grease and wear down the parts of the joint. CV boots should be replaced as soon as cracking is visible in their rubber folds. Pick up one of these Dorman CV joint boots to eliminate the problem.
( 5 )
$17.99
—
$23.99
Clearance
Spicer Drivetrain Products light-duty U-joints feature journal crosses that are manufactured from high-quality alloy forgings and heat-treated for maximum life. The bearing cups are case-hardened for strength and durability, while the seals are crafted from nitrile rubber for optimum grease retention and contaminant exclusion. Ample grease reservoirs in each trunnion assure effective lubrication; they're pre-filled with high-quality synthetic lithium grease, providing superior friction-reduction and resistance to higher temperatures. These replacement universal joints are available for dozens of positions, in greasable and non-greasable styles. Order the model designed to fit with your vehicle and engine type.
( 156 )
$29.99
Trail-Gear locking hubs are true replacements. These genuine, factory-new locking hubs are available for several applications. They typically include hub gasket, with some also including cover hardware.
Not Yet Reviewed
$149.99
U-joints act as a pivot point, allowing them to continue transmitting power even when at an angle, and Matsuba universal joints are the gold standard at which all other Toyota aftermarket joints are judged. Trail-Gear Matsuba U-joints are offered as OEM replacements for your stock or mildly modified vehicle or as an upgrade for those of you whose off-roading adventures would result in any type of joint snapping. Most universal joints include zerk grease fitting and all include C-clips. Toyota, Suzuki, and Chevy applications are available. Select the Trail-Gear U-joint designed for your vehicle.
( 3 )
$39.99
Clutches are subjected to continuous wear and tear. LuK clutch kits are made with premium quality components, engineered and manufactured to be problem-free. These kits are functionally tested to meet OEM performance specifications and provide an innovative and quality engineered clutch kit. As an original equipment supplier, LuK develops the performance specifications for individual vehicle applications.
( 381 )
$159.99
—
$225.99
LuK solid flywheels are dynamically balanced to eliminate vibration and increase clutch performance. Manufactured to OE specifications, pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing, offering a smooth, flat surface crucial for proper clutch operation. They are engineered and built with quality materials for a longer service life. Select the disc diameter and ring gear tooth quantity needed for your application.
( 123 )
$95.99
If your factory CV boots are cracked, torn, or worn out, replace them with Low Range Off-Road CV boot kits before the damage spreads to your CV joints. These CV boot kits offer enhanced durability and flexibility compared to standard OEM boots, making them particularly beneficial for lifted off-road vehicles. The kits are designed to protect the constant velocity (CV) joints from contaminants and wear, especially when the axle operates at steeper angles. Constructed from high-quality neoprene or similar robust materials, these aftermarket boots are more resistant to abrasion, drying, and tearing than many standard factory-style rubber boots. This is crucial for protecting the CV joint from mud, water, sand, and other debris encountered while off-roading. These CV boot kits include a pair of OEM-style neoprene inner boots, along with appropriate CV-Joint clamps, axle C-clips, and necessary components for installation. Select the CV boot kit designed for your year, make, and model vehicle. Important Notes: CV-Joint clamp crimp pliers are required to install CV clamps. If you do not have crimp pliers, it is recommended to select kit with crimp pliers. Additional grease may be needed for Long Travel boots.
Not Yet Reviewed
$54.15
—
$111.09
Clearance
Beck/Arnley clutch master cylinders are high-quality, direct-fit OE replacement master cylinders. They will restore proper clutch operation while extending clutch life. These direct replacement parts meet or exceed OEM specifications.
( 8 )
$64.99
$37.50
Clearance
Beck/Arnley clutch slave cylinders are designed to deliver increased performance and reliability. They will help to make sure that your clutch is working at optimum levels and maintaining excellent drivability. Beck/Arnley clutch slave cylinders are available for passenger cars and light trucks, so we are sure to have your application covered.
( 11 )
$28.99
$16.50
SPEC Stage 3 clutch kits are designed for street, drag race, pulling, and autocross use. They feature a carbon semi-metallic 6-puck sprung hub disc that has been the leading puck clutch in drivability, life, and torque capacity. These units are intended for street and race cars that require an aggressive but streetable engagement and high torque capacity. Their hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Additional features of SPEC Stage 3 clutch kits: * Also available in 3-puck configuration * High-clamp pressure plate * Carbon-graphite friction material * High-torque sprung hub and disc assembly * Bearing and tool kit included * Also great for road racing, rally, and drifting
( 18 )
$359.10
Clearance
Prevent leaks and save money with AutoExtra wheel seals. They're quality OE replacement parts that offer a solid choice for dependable, long-lasting service, and extended bearing life. They keep wheel bearing grease in and dirt out. You don't need to spend a lot for a good, dependable seal--all you need are AutoExtra wheel seals.
Not Yet Reviewed
$9.99
$7.50
SPEC Stage 5 clutch kits feature full-metallic discs with the highest possible friction co-efficient. They are street-drivable but not street friendly. Their hubs are solid with 12 rivets and each assembly is heat-treated for strength and durability. Additional features of SPEC Stage 5 clutch kits: * High-clamp pressure plate * Full-metallic friction material * High-torque solid hub and disc assembly * Bearing and tool kit included * Best for extreme street use and drag racing * Also excellent for pulling and autocross
Not Yet Reviewed
$539.10
USA Standard manual transmission bearing kits include top-quality components to rebuild the bearings in your transmission. They're great for replacing worn out or broken items--even just giving your transmission a quick update, while you're down in the off-season.
( 9 )
$175.99
—
$310.99
South Bend Clutch Stage 2 Drag Race clutch kits are designed with racers in mind. They include a single mass SFI-approved flywheel with each kit—typically required for drag racing when the original design is dual mass. The heavy-duty pressure plate is modified for a puck-style disc with no cushion between the linings to keep the clutch pedal travel short and quick. These South Bend Clutch Stage 2 Drag Race clutch kits are recommended for drag racing, drifting, and limited street use. Order the kit that's recommended for your specific vehicle and engine size. Features, items, and specs include: * Graphite-impregnated ceramic friction material for exceptional durability, heat transfer, torque capacity, and reduced chatter * Puck-style disc reduces rotational mass and total drive surface area, while increasing psi on the surface of the friction material * Disc design minimizes inertia, accelerating the transfer of torque from the engine to the wheels * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$570.16
—
$681.29
South Bend Clutch Stage 2 Daily Driver clutch kits are engineered for vehicles with high performance modifications. The heavy-duty pressure plate has an increased clamp load with little or no increase in pedal pressure to offer stock feel, while increasing strength and durability. The organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining. This greatly increases rotational strength up to a 12,000 rpm burst point for high performance. South Bend Clutch Stage 2 Daily Driver clutch kits are recommended for daily performance, street, and moderate race vehicles. Select the kit designed for your application needs.
( 6 )
$378.67
—
$489.81
South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings
( 3 )
$506.33
—
$617.47
Designed for spirited and daily driving, the South Bend Clutch Stage 1 clutch kits make for a great OEM replacement when your factory clutch gives out. The pressure plate included in this clutch kit has an increased clamp load that promotes longer life, and the disc is dual dampened for smooth engagement and increased transmission life. The disc has also been designed with premium friction materials, which will ensure for rapid heat dissipation and will help to increase the life of the clutch. Select the Stage 1 HD clutch kit designed for OE replacement or your performance application.
( 17 )
$226.33
—
$362.15
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
