Availability
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 15 )
$23.99
The chain of command between a crankshaft, camshaft, and engine valves is central to your vehicle's basic movement—which is why it's so important to protect the timing belt. Fel-Pro timing cover gaskets provide a tight seal to keep contaminants out of the gear shaft area. They're offered in hundreds of single or multi-piece sets for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs; gaskets for industrial use are also available. Ideal for stock replacement (not intended for racing applications), Fel-Pro gaskets are made from materials such as fiber, cork, and rubber. Choose the kit which corresponds to your year/make and engine application.
( 533 )
$26.99
—
$43.99
Red Line MTL transmission gear oil is a 75W80 GL-4 gear oil (SAE 5W30/10W30 engine oil viscosity) designed for use in manual transmissions and transaxles. MTL is a low 75W at very low temperatures, and a high 80W, nearly an 85W, at elevated temperatures, providing adequate viscosity to prevent wear and deaden gear noise. Overall, this gear oil offers excellent protection of gears and synchronizers, and its balanced slipperiness provides a perfect coefficient of friction, allowing easier shifting.
( 70 )
$23.10
Mahle Original rear main seals are high-quality rear main seals designed to replace your factory seals. They are constructed from high-quality materials to meet or exceed OE standards and are designed to provide long-lasting durability and performance. If you're looking for high-quality replacement seals for your vehicle, Mahle Original rear main seals are your solution.
( 23 )
$30.99
—
$44.99
Dura-Bond high performance cam bearings are ideal for racing. They offer double the fatigue strength of standard bearings.
( 98 )
$25.99
—
$27.99
Summit Racing offers replacement thermostats for thousands of vehicles. They're offered in a variety of styles, materials, flow rates, temperature ratings, and more. A reliable thermostat is essential to your cooling system and overall performance—kicking in precisely when your engine needs it. Order the model best suited for your application.
( 349 )
$30.99
—
$49.99
Fel-Pro Performance valve cover gaskets are an excellent choice for engines, especially those that produce high horsepower. Fel-Pro performance valve cover gaskets are available in many materials for a variety of applications and needs. When your engine needs new gaskets, look no further than Fel-Pro performance gaskets for the best sealing power.
( 469 )
$25.99
Red Line GL-5 gear oil has been engineered to provide the highest degree of protection and improvement of your differential efficiency. Formerly Lightweight gear oil, this new formula contains additional friction modifiers for suitability with clutch-type limited slip differentials, and for most, no additional friction modifiers would be required. This gear oil offers excellent lubrication, a high viscosity index, and the ability to lower operating temperatures, as well as exceeding API GL-5 specifications. Reduce friction for better performance--add the improved formula of Red Line GL-5 gear oil.
( 88 )
$23.53
It's easy to diagnose worn-out oil pan gaskets--just follow the trail of black drips on your clean cement. Fel-Pro offers hundreds of OEM-style replacements to fit a wide range of auto, truck, marine, industrial, and agricultural applications. Many are one-piece units, while others are multi-piece with kit accessories. Depending on your vehicle, the oil pan gaskets could be constructed of molded rubber, cork and neoprene, PermaDryPlus, or rubber-coated fiber or steel core. Match up your specs to the Fel-Pro gasket needed to seal off oil leaks.
( 979 )
$22.99
—
$45.99
Clevite camshaft bearings are manufactured to meet or exceed OEM parts when it comes to strength and durability. They will help to give your motor extra life, and their quality construction and superior materials will help to protect your vital engine parts from the harmful effects of friction. With thousands of applications, you're sure to find the bearings you need for your motor.
( 175 )
$28.99
—
$39.99
Get more spark from your plugs with a set of Summit Racing™ 8mm ignition wires. They feature high-temperature silicone outer jackets and insulation, along with a fiberglass braid for more pull strength. These wires are available in custom-fit or universal sets. The custom-fit wires have both terminal ends installed; while the universal sets have the spark plug boots installed—and come with the distributor boot terminals. A variety of terminal ends and spark plug boot ends are available. Order the ignition wires recommended for your vehicle and engine application.
( 991 )
$41.99
—
$54.99
Summit Racing™ timing cover gasket kits provide a tight seal to keep contaminants out of the gear shaft area. They're offered for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs. Choose the kit which corresponds to your year/make and engine application.
( 30 )
$40.99
ACDelco engine oil pressure indicator switches are quality replacement parts you can feel good about installing. They offer the fit, form, and function—along with value—you expect and want. ACDelco has a wide selection of components to optimize your GM vehicle's performance, as well as products to cover many other makes and models. Order the ACDelco oil pressure safety switch designed for your specific vehicle.
( 25 )
$48.99
Specifically designed for diesel engines, ACDelco diesel exhaust fluid is the primary component used to help convert an environmental pollutant into harmless nitrogen and water. It's a mixture of 32.5 percent high-purity synthetic urea and 67.5 percent deionized water. This additive is stable, colorless, non-flammable, and non-toxic.
( 57 )
$27.99
Fel-Pro rear main seal cover gaskets are designed to fit between the engine block and rear main seal cover. They are manufactured from quality materials and install in the factory location to ensure a direct fit.
( 38 )
$26.99
TCI introduces a fresh line of quality filler tubes. Applications for the most popular Ford, GM, and Chrysler transmissions are available. Most of the dipsticks feature a locking stick that satisfies sanctioning bodies' racing rules. The rubber boot seal is a vast improvement over the small O-ring typically used on older OEM tube designs.
( 183 )
$44.95
Summit Bucks
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 101 )
$29.99
—
$58.99
Fel-Pro PermaTorque MLS head gaskets provide the robust seal needed to contain peak combustion pressures and temperatures—and to withstand the significant casting motion encountered in many of today's automotive engines. The gaskets feature multiple layers of steel, precisely engineered sealing beads, and advanced polymer coatings to maintain a proper contact pressure between the cylinder head and block. Unlike other multi-layer steel head gaskets, PermaTorque MLS seals also include a proprietary blue aftermarket coating that accommodates a wider range of surface finishes. These gaskets are manufactured using precision tooling to ensure exact sealing bead location and profile. Order the model recommended for your specific vehicle and engine application.
( 85 )
$41.99
—
$46.99
Leaks in the exhaust manifold produce bad exhaust valves, a loss of power, and increased fuel consumption. Mahle Original exhaust gaskets require metal beads where the gas passes through at very high temperatures and low pressure. These metal beads are reinforced with metal sheets to resist the component movement that arises from large fluctuations in temperature.
( 14 )
$22.99
—
$36.99
ACDelco GM Genuine Parts timing cover seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These true OE parts give you the peace of mind that the fit, form, and function will be just as expected. Stay with the parts brand your GM vehicle came with and get the quality you know and trust with ACDelco GM Genuine Parts.
( 25 )
$26.99
ACDelco DEXRON-VI automatic transmission fluid is the most recent release in the well-established DEXRON Series of automotive transmission fluids. It provides more consistent shift performance, even in extreme conditions, and degrades less over time. DEXRON-VI helps automatic transmissions last longer and perform better. Fully licensed and approved by GM, it is recommended for use in GM transmissions model year 2006 and newer calling for DEXRON-VI automatic transmission fluid (replaces DEXRON-III and DEXRON-II(E)), and recommended for any transmission that calls for DEXRON-VI, III, or II(E). ACDelco DEXRON-VI automatic transmission fluid is not for use in CVT (Continuously Variable Transmissions) or DCT (Dual Clutch Transmissions) that require specialized fluids. Features: * Good frictional characteristics and wear protection provide enhanced cold-temperature performance, excellent friction retention and smooth shifting. * High oxidation resistance fortifies against rust and corrosion and provides for longer fluid change intervals. * Wide range of seal compatibility – can be used in an extensive variety of vehicles/transmissions. * Meets requirements for foam protection and protects against metal-to-metal friction and wear within the transmission.
( 68 )
$51.99
McGard wheel locks protect your valuable wheels and tires from theft. Having your wheels and tires stolen could leave you stranded in a bad place at the wrong time. These easy-to-use, one-piece steel wheel locks function like regular lug nuts—but require a special key tool for installation and removal. Order the size and style designed for fitment on your studs, then travel with peace of mind, courtesy of McGard wheel locks.
( 226 )
$27.99
—
$36.99
ACDelco offers engine timing covers for a variety of cars, trucks, vans, and SUVs. The aluminum replacements are available in different configurations for factory-style fitment. Some models also include gaskets and hardware. These parts are designed, engineered, and tested to rigorous standards—backed by General Motors. Order the OE direct-fit timing cover recommended for your vehicle.
( 3 )
$47.99
Sealed Power A-Series rod bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank with a surface that hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better wall variance control. It also helps to minimize debris embedding, which can score the crank's surface. Order the replacement bearings designed for your vehicle make and engine application.
( 32 )
$31.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
