Availability
Showing In Stock Items. Show All 338 Items.
The engineers at FAST teamed up with the airflow specialists at RHS to develop a 3-piece, polymer intake manifold. They are constructed from a proprietary advanced polymer material that offers a host of benefits over aluminum aftermarket intakes, including lighter weight and improved strength and heat dissipating characteristics. While they feature a 102mm air inlet that is perfectly suited to the FAST Big Mouth 102mm throttle body, they can also be used with stock or aftermarket 90mm or 92mm throttle bodies. Other features include integrated nitrous bungs and perfect bolt-on fitment that allows for the use of factory accessories without modifications or clearance concerns. FAST LSXR intake manifolds' 3-piece modular design allows for easy disassembly and porting. This new design gives you the ability to remove individual runners from the manifold for modification.
( 26 )
$450.95
—
$1,210.95
Magnuson supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. This technology recalibrates the engine and transmission control programs to work with the altered induction path and boost pressure of the supercharger. And that produces a seamless and consistent delivery of power over the entire rpm range--not just the high end! For you, that means Magnuson superchargers will boost your power output, and yet run like their factory installed units. Whether you're driving a Corvette or a Cadillac, a Silverado or a Hummer, or a Camaro or a Mustang, Magnuson supercharger kits deliver maximum performance!
( 12 )
$8,395.00
Walbro electric in-tank fuel pumps are available in a variety of flow ratings, including pumps that flow significantly more fuel at higher pressure. The outside dimensions, however, of many pumps are compact enough to fit existing hanger assemblies, without modification. All pumping components have been validated to OEM specifications for use in E85/flex fuel applications. Most Walbro in-tank fuel pumps utilize a proven gerotor design. Some high-performance models, including those designed for engines with more than 750 hp, feature a dual-channel turbine design for maximum efficiency in high-pressure and high-temperature applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's higher than conventional pumps. Some pumps require modifications to system wiring, fuel lines, and the fuel module, and should be professionally installed. Installation kits including a fuel strainer, fuel hose, harness pigtail, clamps, and wire connectors are sold separately.
( 370 )
$271.99
These FAST LSX intake manifolds are the only 3-piece Gen III composite manifolds proven to deliver increased performance without compromising bottom-end drivability or high-rpm horsepower. They easily bolt onto GM Gen III (LS1, LS2, and LS6) engines and are designed to work with the 92mm FAST Big Mouth throttle body. The new stylish black intake manifolds deliver terrific performance right out of the box and can be ported by the customer for even more flow. As requested by previous LSX customers, the FAST LSX intake manifolds feature the added benefits of corrosion-free stainless steel assembly bolts, an improved throttle body sealing flange, and O-ring gasket and threaded insert throttle body mounts that provide increased durability.
( 5 )
$1,222.95
S&B Filters cotton filter cold air intake kits are designed to improve airflow and bring down the temperature of the air that enters your engine. To achieve more airflow S&B oiled cotton filters are built with four or eight layers (for diesels) of the highest-quality cotton gauze. They use deeper and wider pleats with more pleats per filter. Plus, their manufacturing process yields filters with almost no "bleed", creating a greater open surface area. All of this adds up to more surface area per filter, and that means more airflow with excellent protection. All S&B cotton air filters are washable and reusable and will protect your engine from harmful dirt and debris. Your rig will not only gain performance, but also a sporty high-tech appearance under the hood. In addition, the filters and couplers are made with silicone rubber, not urethane, to help ensure they won't degrade or crack and can resist temperatures as high as 400 degrees F. These intake kits are simple to install, and the great looking signature clear lid allows visual inspection of your filter at all times. Remember, there are good air intakes … and then there are the better intakes--demand the better; choose the efficiency and style of S&B Filters cold air intake kits. Features include: * Helps balance air/fuel ratios to improve gas mileage * Specially-crafted cross-linked intake tube minimizes restriction * Custom air box keeps loose dirt and turbulent underhood air out of your intake * Custom-made for your specific year, make, and model * Easy-to-use installation instructions and illustrations * With the included mounting hardware, replaces your stock tract in 30 minutes or less
( 432 )
$349.00
DeatschWerks fuels your passion for performance with fuel injectors specifically designed and engineered for your Sport Compact, Modern Muscle, and European vehicles. DeatschWerks fuel injectors are manufactured to fit your OE harness, fuel rail, and manifold. Because they are application-specific, you'll spend less time installing and tuning, so you can spend more time enjoying the increased performance of your ride! They provide an excellent spray pattern and atomization for optimized idle and tuning. Each set is flow-matched both statically and dynamically, and flow-balanced to within one to two percent. A flow report is included with each set of DeatschWerks fuel injectors.
( 66 )
$449.00
—
$1,689.00
ACDelco GM Genuine Parts fuel injectors are an electro-magnetic valve that meters fuel into the engine's intake manifold or cylinders for combustion, and is a GM-recommended replacement for your vehicle's original component. The engine management computer operates the injector by applying an electric current to the injector solenoid winding—this causes the needle valve to open, and allows the pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. They are also offered in kits with the necessary parts, such as seals, clamps, and spacer.
( 6 )
$62.99
—
$73.99
FAST LSXRT intake manifolds are designed specifically for GM truck engines (4.8L, 5.3L, and 6.0L) and LS1, LS2, and LS6 race applications where hood clearance is not a concern. FAST LSXRT 102mm intake manifolds follow the path chartered by the original FAST LSX Gen III intakes by featuring a modular design that allows for easy porting and disassembly and a runner design that yields an incredible 25 peak horsepower gain over the stock intake (on a stock 6.0L engine with a Big Mouth 102mm throttle body). Similar to the LSXR 102mm intake manifold for cars, the LSXRT features the ability to remove individual runners for modification. LSXRT's are constructed from a proprietary precision injection molded polymer which offers many benefits, including lighter weight, greater strength and lower heat soak propensity. While they feature a 102mm air inlet that was designed for the FAST Big Mouth 102mm throttle body, they can also be used with stock 90mm or aftermarket 92mm throttle bodies (78mm three-bolt throttle bodies require an adapter). Other features include integrated nitrous bungs and precise bolt-on fit that permits the use of factory accessories and OEM fuel/emission connections without adjustments or clearance issues. Some GM truck models may require the FAST 92mm or 102mm throttle body.
( 10 )
$1,269.95
—
$1,301.95
The FAST LSXHR intake manifolds are available for LS3 rectangular port applications, as well as LS7 raised rectangular port applications. These units are the industry's first polymer tunnel ram-style intake manifolds—and are ideal for generating maximum power in boosted and naturally aspirated engines. Order the model designed for your application. Features include: * Standard "tall" stacks are interchangeable with separately purchased "medium" and "short" stacks to find the most powerful combination * Polymer construction is lightweight and high strength to eliminate power-robbing heat soak commonly found in aluminum intake manifolds * Average 30 hp gain between 5,000 and 7,500 rpm over competitors' high-ram intake manifolds * Rated for up to 45 psi of continuous pressure * Compound fuel injector angle aims spray pattern for ideal atomization, resulting in maximum power production and superior drivability * Reversible top allows for forward- or firewall-facing throttle body installations * Two nitrous nozzle bosses per runner for clean and easy direct port system installations * 103mm throttle body opening can be ported to 105mm
( 7 )
$1,325.95
Summit Racing™ drive-by-wire throttle bodies are a perfect upgrade for any late model LS/LSX engine. They're precision-machined from 6061 billet aluminum and come in multiple finishes. The unique blade design allows these throttle bodies to bolt right up to any factory or aftermarket LS/LSX intake manifold—and they utilize the original late model GM 6-pin connector. Their larger bore size allows for increased airflow, which results in fast, smooth acceleration across all RPM ranges. The proprietary electronics and stepper motor allow these throttle bodies to be used on both naturally aspirated and forced induction engines. Tuning is required for installation.
( 7 )
$601.99
—
$621.99
For maximum power with exceptional drivability, transplant the power of fuel injection into your vehicle with Painless Performance fuel injection harnesses. All kits include straightforward instructions and TXL high-temperature, color-coded, and labeled wire for ease of installation. All fuel injection harnesses are 100 percent quality-tested on OmniScanners to ensure the viability of the circuits. Harnesses for both GM and Ford applications are available and they use genuine original equipment connectors for trouble-free installation and operation.
( 94 )
$137.99
—
$725.99
An LS engine swap is a no-brainer when it comes to adding some affordable horsepower to a project car. Unfortunately, any swap comes with its share of headaches, including wiring—and that's where Top Street Performance standalone fuel injection wiring harnesses come in. TSP offers three harnesses for drive-by-wire/drive-by-cable applications and they include a fuse block and all the connectors for a headache-free install. Order the harness recommended for your system.
Not Yet Reviewed
$444.44
ACDelco GM Genuine Parts fuel injection throttle bodies are GM-recommended replacements for your vehicle's original component. It is located on the intake manifold, and contains the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. These true OE fuel injection throttle bodies have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 38 )
$150.99
—
$262.99
Summit Bucks
Add Delphi fuel injection idle air control valves to control the airflow into your engine. Delphi OE replacement valves provide a superior fit and finish that result in an easier installation for you. Their idle air control valves meet federal emissions regulations, increase your fuel efficiency, and eliminate the potential for malfunctions. Get control over the amount of air allowed to flow into your engine, and your engine idle speed, in a variety of load conditions when you replace your air control valves with Delphi fuel injection idle air control valves.
( 34 )
$92.99
—
$109.99
Spectre Performance cold air intake kits provide better acceleration and fuel economy for your truck or SUV. They're designed to replace your factory air filter and air box assembly, eliminating the restriction as they smooth and straighten airflow. The high-flow design of these intakes enables your engine to breathe in a larger volume of air, resulting in more usable power throughout the engine's entire rpm range. Hundreds of models are available, with various tube and filter options. Choose the kit tailored for fitment and performance on your make/model application.
( 830 )
$174.81
—
$199.99
Standard Motor Products fuel injectors help you attain maximum fuel efficiency and power from your engine. Properly operating injectors are essential components for enabling your vehicle to run flawlessly. These OEM stock replacements are available for hundreds of specific applications. Don't drive with faulty fuel delivery. Update worn or malfunctioning fuel injectors with reliable models from Standard Motor Products.
( 247 )
$58.99
—
$599.99
ACDelco GM Genuine Parts fuel pump control modules regulate the voltage supply to the electric fuel pump. These modules receive an electronic signal from the engine control module that determines the voltage applied to the pump, altering pump motor speed and pressure. These GM Genuine Parts replacements provide the performance, durability, and service life you expect from General Motors. Order the model designed for your application.
( 8 )
$55.99
—
$64.99
When you're in need of an electric fuel pump, all you need to know is ACDelco. That's because ACDelco is an industry leader in the fuel pump market, delivering quickly available, quality components for most vehicles on the road. Simply put, you can rely on ACDelco's full line of electric fuel pumps. They have built their reputation on quality that you can believe in. ACDelco electric fuel pumps are manufactured in ISO-9001 and QS-9000 registered facilities with quality control systems that help ensure that their fuel pumps will consistently satisfy your requirements. Order the replacement model designed for your vehicle. All ACDelco electric fuel pumps are engineered to provide: * Outstanding fuel-delivery performance * Quick engine starts and a continuous fuel supply * Long-lasting durability * Easy installation and proper fit
( 121 )
$200.99
—
$230.99
Earl's Performance LS steam vent kits eliminate trapped air and steam from your engine to prevent hot spots and overheating. They offer a selection of these LS power plumbing kits, with the appropriate braided stainless steel Speed Flex hose with hose ends that make installation easier and much more attractive than OEM hard lines. Plus, they provide more flexibility when you're using aftermarket intakes and other accessories on performance vehicles. The kits are available in front and 4-corner plumbing options, with adjustable anodized aluminum steam vent adapters and/or distribution blocks. Plumb your LS for performance with Earl's steam vent kits.
( 5 )
$299.95
—
$349.95
Injector Dynamics ID2600x fuel injectors are developed specifically for use with liquid fuels, featuring corrosion-resistant internals, and long-term compatibility with ethanol and methanol. ID2600-XDS fuel injectors have the highest flow rate of any injectors offered by Bosch and flows 50 percent more than the ID1700x units. Injector Dynamics ID2600x fuel injectors feature Dual Slope Matching, a method of matching the flow rate in both the linear and nonlinear operating range, to provide better cylinder-to-cylinder consistency at low pulse widths.
Not Yet Reviewed
$2,881.20
Summit Bucks
Delphi fuel injectors are engineered with an accurate, controlled spray pattern that reduces emissions and improves cold-start capabilities. These replacement injectors have a recessed fuel exit and no internal seal rings—in order to minimize leakage and possible puddling. Delphi fuel injectors are durable, dependable, and offered for a wide variety of applications. Order the OEM stock replacements designed for your vehicle.
( 9 )
$99.99
—
$108.99
Nitrous Express 4-bolt plate systems for GM LS-style engines feature a billet 90mm or 102mm nitrous plate that installs between the throttle body and intake manifold, making installation quick, easy, and attractive. Power levels can be adjusted between 50, 100, 150, 200, 250, 300, 350 and 400 horsepower. The systems are pre-machined with a second set of nitrous and fuel passages so you can easily upgrade to a dual stage system down the road. (Special note: These kits will work on 2010 and newer Camaros if you rotate the throttle body 180 degrees.) Order the model best suited for your setup. Systems include: * 90 or 102mm nitrous plate * Choice of no bottle, 5 lb., 10 lb., 12 lb., or 15 lb. bottle * Stainless bottle brackets (except no bottle system) * ProPower Lightning Series solenoids * 6 AN feed line * Braided stainless steel solenoid to plate lines * Master arming switch * WOT switch * Every nut, bolt, and electrical connector needed to complete installation
( 3 )
$857.57
—
$1,634.76
On Sale
JET Powr-Flo throttle bodies are direct replacements for factory units, and can be used to replace a worn-out throttle body or to upgrade your existing throttle body. They provide increased airflow for improved throttle response by taking advantage of JET's unique inlet design, and they include all new pre-installed calibrated electronics to allow for a simple "remove and replace" installation. JET Powr-Flo throttle bodies increase air velocity to the intake manifold, improving throttle reaction and provide horsepower throughout the entire rpm range. Order the JET Powr-Flo throttle body compatible with your vehicle.
( 108 )
$389.96
$350.96
Airaid modular intake tubes optimize airflow to the engine by replacing inefficient originals. Factory tubes often have accordion-shaped walls, sound-canceling baffles, and undersized tube diameters that hurt airflow. The Airaid modular intake tubes help straighten and improve airflow to the engine, while also offering the best location for your mass air sensor. This design provides better throttle response, additional horsepower, and better fuel economy. These tubes are constructed from cross-linked, high-density polyethylene for strength and resistance to heat transfer. Airaid modular intake tubes are direct replacements for factory models, accommodating all sensors and fittings that attach to the factory tube. These tubes also work with the factory throttle body and intake box, and they include all necessary couplers and clamps for installation.
( 163 )
$153.99
—
$194.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
